Inenga Matawai Tino Tika | Pūnaha Ine Matotoru Kiriata Angiangi Kore-Whakangaro me te Taupū Whakaata
Ngā Tohutohu Tono
Nā te āhua motuhake o te hua, ko te utu e whakaaturia ana i te whārangi he utu tāpui, ehara i te utu tuturu. Tena koa whakapā atu ki te ratonga kiritaki mō tētahi whakatau utu.
Kāore e taea te tuku atu i ngā ota i tukuna tika mai me te kore whakapā atu i mua! Ngā mihi nui ki a koe mō tō mahi tahi! Mō ētahi atu pārongo hua, whakapā atu ki te ratonga kiritaki kia whiwhi ai koe i ngā pukapuka hua.
Ngā Inenga Matua
Matotoru o te Kiriata (kotahi ki te maha-paparanga)
Taupū Whakaata (n) me te Tauwehenga Whakangaromanga (k)
Āputa Roopu Whatu (hei tauira)
Te Pākari o te Mata
Ngā Wāhanga Hangarau
Whānuitanga Whānui: Kapinga UV ki te NIR mō te tātari rauemi maha-whakamahinga
Teitei o te Tairongo: Ka taea te ine i ngā kiriata tino angiangi ki raro ki te tauine iti-nanomita
Kore-Pa, Kore-Whakangaro: He pai mō ngā tauira tairongo i roto i ngā taiao R&D me te whakaputa
Pūmanawa Whakatauira Matatau: Tautoko ana i te tātaritanga puranga maha-paparanga matatini me ngā rerengamahi ngāwari ki te whakamahi
Ngā tono
E whakamahia whānuitia ana tēnei pūnaha i roto i te hanga haurua-haurua, te paninga whatu, ngā whakaaturanga papatahi, te whakawhanaketanga o te photovoltaic (pūtau rā), te rangahau pūtaiao rauemi, me te pūtaiao koiora.
He aha i whiriwhiri ai i tā mātou otinga
Hei kaihanga ngaio me ngā pūkenga R&D kaha, ka tukuna e mātou he utu tika mai i te wheketere, he whirihoranga whakarite, me te tautoko hangarau motuhake. Ahakoa e hiahia ana koe ki tētahi pūnaha papa mō te tātari taiwhanga, ki tētahi otinga ā-roto rānei mō te aroturuki whakaputa, ka taea e mātou te whakarite i te taputapu kia rite ki ō hiahia ine.
Tonoa he Whakatau
Whakapā mai ki a mātou i tēnei rā tonu hei matapaki i tāu tono, hei tono rānei i tētahi utu. Ka whakaratohia e tā mātou tīma he kōrero hangarau kore utu hei āwhina i a koe ki te whiriwhiri i te otinga ine kiriata angiangi tino pai.
Ngā Tawhā Hangarau Matua
1. Ngā Āheinga Ine: Ngā huānga matihiko Mueller o te raupapa 16, te whānuitanga polarization Psi/Delta, te taupū whakaata, te matotoru, te birefringence, me te pūmau dielectric, me ētahi atu.
2. Awhe Whānui: 210nm-1690nm
3. Te Mokowā Roangaru: ≤0.8nm@210-1000nm, ≤3.5nm@1000-1690nm
4. Wā Ine Pūwāhi Kotahi: ≤10s
5. Rahi o te ira iti: ≤200μm
6. Hangarau Whakarerekētanga: Whakarerekētanga pūnaha utu hurihuri takirua a PCSCA
7. Wāhanga Tauira Aunoa: Arotahi aunoa ki te tuaka-Z, te haere mōrahi 18mm, te taahiraa iti rawa 1µm
8. Te tika o te tukurua o te matotoru o te kiriata: ≤0.005nm (100nm SiO2/Si, 30 inenga tukurua, tatauhia hei 1σ)
9. Te tika o te tāruarua o te taupū whakaata: ≤0.0002 (100nm SiO2/Si, 30 inenga tāruarua, tatauhia hei 1σ)
10. Te tika o te matotoru o te kiriata: ≤0.5% (100nm SiO2/Si, kua whakaratohia he pūrongo inenga tuatoru)
11. Mahi mahere: E whakamahi ana i tētahi wāhanga matawai aunoa momo x/y tino tika, e tautoko ana i te tūnga aunoa me te ine matawai o ngā papa 2/4/6/8-inihi, te tika o te whakahokinga ≤6μm, te whakaputa kotahi-pāwhiri o ngā mahere tohatoha matotoru kiriata 2D/3D.
12. Te awhe me te arotahi o te taiaho: Te whakanoho i te roa arotahi aunoa mā te ara whatu whakaata taiaho, te haere arotahi ≤3mm
13. Tauira rerekētanga: Ka tatau aunoa i ngā raraunga rerekētanga psi-diff me te delta-diff
14. Pūmanawa tātari: Kei roto i tēnei pūmanawa te iti rawa o ngā momo ine e 5, he pātengi raraunga n/k kua hangaia mō ngā rauemi whatu neke atu i te 100, ā, e tautoko ana i te waihanga pātengi raraunga ritenga; kei a ia ngā āheinga tātari whakamātautau me te whakatauira mō ngā kiriata angiangi kotahi-paparanga, maha-paparanga (tae atu ki te 30 paparanga), me ngā kiriata angiangi tauutuutu whakakotahi, tae atu ki ngā tauira cauchy, Sellmeier, Tauc-Lorentz, Bspline, me Oscillator, ā, e tautoko ana i te raihana pūmanawa tuimotu.
Ngā Whakatakotoranga Hangarau
I. Whakataki Taputapu
Kei roto i te ME-Mapping Spectroellipsometry te hangarau whakarerekētanga whakakapi hurihuri-rua me ngā rauropi tātari raraunga tino tika. Ka taea e ia te whiwhi i ngā huānga 16 katoa o te matrix Mueller katoa me te whānuitanga pōraritanga i roto i te inenga kotahi, ka taea ai te ine tauira tere me te kore-whakangaro. E whakamanamana ana te taputapu i tētahi hoahoa ara whatu pumau, ā, e whakamahi ana i tētahi pūoko matao-haurua-haurua, e whiwhi ana i ngā tohu kaha mārama i roto i ngā hēkona. Ka tukuna e ia he tere ine tere me te tika teitei ake, e tautoko ana i te ine tika o ngā tawhā pēnei i te matotoru, te taupū whakaata, te tauwehenga mate, me te pūmau dielectric whatu mō ngā rauemi kiriata angiangi. Hei tāpiri, ka taea te whakarite ki ngā "wāhanga tūnga wafer repeatable" rerekē te rahi mō ngā inenga matawai mahere maha-ira o ngā tauira rahi-rahi.
II. Te Whānuitanga o te Tono
Ko te nuinga o ngā tohunga elipsometrist e whakamahia ana i roto i ngā semiconductors, ngā whakaaturanga papatahi, ngā photovoltaics solar, ngā kiriata angiangi whatu, ngā whakawhitiwhiti kōrero whatu, me ngā nanomaterials.
III. Ngā Whakaritenga Hangarau Whānui
1. Ngā Whakatakotoranga Hangarau:
1.1 Ngā Tawhā Ine: ngā huānga matihiko Mueller o te raupapa 16, Psi/Delta, te taupū whakaata, te matotoru, te birefringence, me te pūmau dielectric, me ētahi atu.
1.2 Awhe Whānui: 210nm-1690nm;
1.3 Te Wā Ine i te Pūwāhi Kotahi: ≤10s;
1.4 Rahi o te Irahiko: ≤200μm;
1.5 Hangarau Whakarerekētanga: Whakarerekētanga utu hurihuri takirua PC1SCA;
1.6 Wāhanga Tauira Aunoa: Tautoko ana i te arotahi aunoa o te tuaka-z, te haere mōrahi 18mm, te taahiraa iti rawa 1μm;
1.7 Te Matotoru o te Kiriata Te Tika o te Whakahokinga: ≤0.005nm (100nm SiO2/Si, 30 inenga whakahokinga, tatauhia 1σ);
1.8 Te Tika o te Whakahokinga o te Taupū Whakaata: ≤0.0002 (100nm SiO2/Si, 30 inenga whakahōu, tatauhia 1σ);
1.9 Te Tika o te Matotoru Kiriata Tino: ≤0.5% (100nm SiO2/Si, kua whakaratohia he pūrongo inenga mai i te hunga tuatoru); μm
1.10 Mahi Mahere: E whakamahi ana i tētahi wāhanga matawai aunoa momo-x/y tino tika, e tautoko ana i te tūnga aunoa me te ine matawai o ngā papa 2/4/6/8-inihi, me te tika o te whakahokinga ≤6μm, me te whakaputa kotahi-pāwhiri o ngā mahere tohatoha matotoru kiriata 2D/3D;
1.11 Te Arotahi me te Kimi i te Awhe Reera: Te whakanoho aunoa i te roa arotahi mā te whakamahi i te ara whatu whakaata reera, me te haere arotahi ≤3mm;
1.12 Awhe Ine Matotoru Kiriata: 1nm-10μm;
1.13 Tauira Rerekētanga: Ka tatau aunoa i ngā raraunga rerekētanga psi-diff me te delta-diff;
1.14 Pūmanawa Tātari:
* Ngā Āheinga Ine Matawai: 16 ngā huānga o te matihiko Mueller katoa, te matawai pōraritanga Psi/Delta, N/C/S, te whakaheke pōraritanga, me ētahi atu;
* Ngā Pūkenga Tātari Raraunga: Ka taea te tātari i te matotoru me ngā pūmau whatu (n, k) o ngā rauemi kiriata angiangi isotropic me anisotropic paparanga-kotahi me te paparanga-maha (tae atu ki te 20 paparanga);
* Tautoko ana i ngā tauira mō ngā pūmau whatu, te tohatoha rōnaki taupū whakaata, te pāpāho ōrite, te taratara, me ētahi atu, o ngā kiriata angiangi maha-wāhanga me ngā rauemi papatipu;
* Tautoko ana i ngā tauira pūmau whatu noa me ngā tauira oscillator noa (tauira Cauchy, tauira Lorentz, tauira Gaussian, Drude, Sellmeier, me ētahi atu), ā, tautoko ana i te whakauru tauira ranu maha-oscillator whakairoiro;
* Tautoko ana i te whakaputa i ngā whakaahua whenua 2D/3D, te tiro i ngā raraunga hītori, me te kaweake me te whakatika raraunga me ngā pūrongo e pā ana;
* Ngā Hōputu Putanga Raraunga: TXT, CSV, SNAP snapshot, raw spectrum, DAT, me ētahi atu;
* Tautoko ana i te ine i te whakaroa ā-wāhanga, ka taea te whakamātautau i te whakaroa ā-wāhanga, te koki azimuth, te koki hurihuri whatu, te ōwehenga whānui, te raupapa, me ētahi atu;
* Kei a ia ngā mahi tātari hanganga kupenga ā-wā 1D/2D me te whakatauira.
2. Rārangi Whirihoranga:
1) Kotahi te huinga o te wae matua o te ellipsometer;
2) Kotahi te huinga o ia ringa ellipsometry me ia ringa tātari;
3) Kotahi huinga o te atamira tauira aunoa;
4) Kotahi huinga pūmanawa tātari;
5) Kotahi huinga o ngā kiriata paerewa;
6) Kotahi te rorohiko;
7) Kotahi huinga taputapu patuiro;
8) Kotahi huinga o te huihuinga ira-iti;
9) Kotahi te papu mimiti korehau;
10) Kotahi te wāhanga matawai mahere.
3. Rorohiko Ine me te Whakahaere
E whakamahi ana i tētahi rorohiko arumoni ahumahi me te pūnaha whakahaere Windows 10; PTM: tukatuka i7; Mahara: 15GB; Kōpae Mārō: 1TB; Mata LCD: 24-inihi; kei roto ko te kiore me te papapātuhi.
4. Ngā Whakaritenga Taiao me te Mana:
1) Ngā Whakaritenga mō te Papa: 2.0m (roa) x 1.2m (whānui), neke atu i te 100kg te kaha kawenga (e taunakitia ana te wehewehe wiri whatu).
2) Awhe Pāmahana Whakahaere: 20~30°C
3) Haumākū Whakawhanaunga: 35%~60%RH
4) Ngaohiko Pūnaha Hiko: 220VAC
5) Ia Āhuatanga: Ko te uara RMS he iti iho i te 4A (220VAC);
6) Mana Mōrahi: 800W
Mea Ine i te Ellipsometry
Te Mātāpono Ine o te Ellipsometry
Te Tukanga Tātari Ellipsometry
Te Elipsometri o te Matrix Muller
Te Matatini Elipsōmetria o ME-L Mueller
Te ellipsometry matrix Mueller tino tika, tino aunoa, taumata rangahau
Te hangarau whakatikatika koki me te arotahi aunoa, te ine tere pāwhiri-kotahi
Atanga tangata-mīhini taunekeneke ārahi, he wheako whakahaere pūmanawa watea
He pātengi raraunga rauemi nui me te whare pukapuka tauira raupaparorohiko, he kaha te kaha o te tātari raraunga
Ngā Whakatakotoranga Hangarau
| Tauira Tau | ME-L |
| Ngā tono | Taumata Rangahau/Pakihi |
| Ngā Mahi Taketake | Psi/Delta, R/T, Mueller Matrix, me ētahi atu pūoko whatu |
| Tātaritanga Whānui | 380-1000nm (e tautoko ana i te whakawhānui ki te 193-2500nm) |
| Wā Ine Kotahi | ≤15s |
| Te Tika o te Ine i te Whakahokinga o te Mahi | 0.005nm |
| Te Tika Tino (Te Ine i te Hau) | Ngā tawhā ellipsometry: 4 = 45 ± 0.05°, A = 0 ± 0.1° Matū Muller: Huānga whakarara m = 10.005 Huānga whakarara m = 0 ± 0.005 |
| Te Tika o te Whakahokinga o te Taupū Whakaata | 0.0005 |
| Rahi o te Ira | Rahi ira nui: 2-4 mm Rahi iti o te ira: 200 μm/100 μm Rahi iti rawa o te ira: 50 μm (i runga i te roanga ngaru) |
Ko te tātaitai tika o te auautanga e ahu mai ana i ngā inenga auautanga e 30 o tētahi tauira paerewa SiO2/Si 100nm;
E pā ana ngā tawhā hangarau motuhake o te taputapu ki ngā kōwae mahi me ngā taputapu tāpiri, ā, ko ngā raraunga kei roto i te ripanga hei tohutoro anake.
Ngā Whirihoranga Kōwhiringa
| Kōwhiringa Pūoro | VN: 380-1650nm |
| V: 380-1000nm | UN: 210-1650nm |
| UV: 245-1000nm | DN: 193-1650nm |
| UV+: 210-1000nm | UN+: 210-2500nm |
| DUV: 193-1000nm | DN+: 193-2500nm |
Kōwhiringa Koki
Pūmau: 65°
Aunoa: 45-90°
Ā-ringa: 45-90° (5° ngā pikinga)
Kōwhiringa kē atu
Ngā Kōwhiringa Mahere: 100*100mm/200*200mm
Wāhanga Whakahaere Pāmahana: 190-550°C/RT-1000°C
Mō Mātou
Kōtaha o te wheketere
He aha mātou i whiriwhiri ai
Ngā Pātai Auau
P1: Ko wai mātou?
A1: I whakatūria i te tau 2015, kua tipu haere tonu a MSK (Tianjin) Cutting Technology CO.Ltd, ā, kua eke ki te Rheinland ISO 9001.
motuhēhēnga. Me ngā pokapū huri tuaka-rima SACCKE Tiamana, te pokapū tirotiro taputapu tuaka-ono ZOLLER Tiamana, te mīhini PALMARY Taiwan me ētahi atu taputapu hanga matatau o te ao, e whakapau kaha ana mātou ki te whakaputa taputapu CNC kounga teitei, ngaio me te whai hua.
Q2: He kamupene hokohoko koe, he kaihanga rānei?
A2: Ko mātou te wheketere o ngā taputapu carbide.
Q3: Ka taea e koe te tuku hua ki tā mātou Kaituku i Haina?
A3: Ae, ki te mea he Kaikawe Tuku kei Haina, ka koa matou ki te tuku hua ki a ia.
Q4: He aha ngā tikanga utu e whakaaetia ana?
A4: I te nuinga o te wā ka whakaaetia e mātou te T/T.
Q5: E whakaae ana koe ki ngā ota OEM?
A5: Ae, kei te wātea te OEM me te whakaritenga, ā, ka whakaratohia hoki e mātou he ratonga tā tapanga.
Q6: He aha koe me whiriwhiri ai i a mātou?
A6:1) Te whakahaere utu - te hoko i ngā hua kounga teitei i te utu e tika ana.
2) Whakautu tere - i roto i ngā haora 48, ka tukuna atu e ngā kaimahi ngaio he whakatau utu me te aro atu ki ō āwangawanga.
3) Te kounga teitei - E whakaatu pono ana te kamupene he tino kounga teitei ngā hua e tukuna ana e rātou.
4) Ratonga muri-hoko me te aratohu hangarau - Ka whakaratohia e te kamupene te ratonga muri-hoko me te aratohu hangarau e ai ki ngā hiahia me ngā matea o te kiritaki.
