Pūnaha Ine Aroturuki Reiti Nui Kawe | Pūnaha Ine Ahumahi 3D Tino Tika
Te Ine Tika mō te Ātea, te Aunoa me te Ahumahi Taumaha
Ka tukuna e tā mātou taputapu aroturuki taiaho nui kawe he ine taunga 3D tino tika mō ngā tono ahumahi uaua. I hangaia hei CMM whatu (mīhini ine taunga), ka taea e tēnei pūnaha aroturuki taiaho te whakatikatika tika i te karetao, te whakarite i ngā mahi nui, me te tirotiro kounga wā-tūturu puta noa i ngā rāngai rererangi, te hanga motuka, te kawe tereina, me ngā mīhini taumaha.
He aha i whiriwhiri ai i tā mātou Aroturuki Taiaho?
Teitei o te Tika: Whakatutuki i te tika o te taumata maikiromita
Hoahoa Kawe: He māmā te kawe me te whakatū ki te papa wheketere, ki ngā papa mahi o waho rānei.
Ngā Whakamahinga Maha: He pai mō te hanga whakamuri, te manatoko huihuinga, me te whakatikatika mīhini.
Kaihanga Pono: Utu tika mai i te wheketere me te tautoko OEM me te tuku puta noa i te ao.
Whakapaipaihia tō rerenga mahi ine ine ahumahi mā te whakamahi i tētahi otinga e whakawhirinakihia ana e ngā kaiwhakarato aroturuki taiaho matua. Ahakoa e hiahia ana koe ki tētahi aroturuki taiaho kawe hei hoko, ki tētahi pūnaha aroturuki taiaho ahumahi ritenga rānei, ka whakaratohia e mātou he mahi pono i te utu aroturuki taiaho whakataetae.
Whakapā mai ki a mātou i tēnei rā mō tētahi whakatau utu, mō tētahi kōrero hangarau rānei.
Whakataki Hua
Ko te taputapu aroturuki taiaho te mea matua e whakamahia ana mō te ine tika i ngā taunga toru-ahu i roto i ngā taiao ā-wāhi nui (tae atu ki te 100 mita). Ka whakauruhia te hangarau whānuitanga whakawhiti taiaho, te hangarau kimi hiko whakaahua, te hangarau miihini tika, te hangarau rorohiko me te whakahaere, me te ariā tatau tau hou. Koinei te taputapu pūtaiao ahumahi tino tika me te mea nui mō te ine ā-wāhi nui, ā, ko ia anake te taputapu hiko whakaahua mahi-teitei e mau ana i te tika taumata μm me te wāhi mahi 100-mita i te wā kotahi. Ka taea te whakamahi i te taputapu aroturuki taiaho mō ngā tono pēnei i te ine i ngā āhuatanga, te tāutanga, te tūnga, te whakatikatika, me te miihini whakamuri, ka waiho hei taputapu ine me te whakamātautau kaha.
Kei roto i te pūnaha aroturuki taiaho GTS he rorohiko, he teihana ine aroturuki, me te whakaata ūnga. Ka whakakotahi i ngā inenga koki me te tawhiti i ngā ahunga whakapae me te poutū hei hanga i tētahi pūnaha ine taunga porowhita. Ka kohia e te whakaata ūnga ngā mōhiohio pūwāhi ine mō ngā huānga āhuahanga ā-wāhi, ā, ka whakahaerehia e te pūmanawa tātari raraunga 3D te tātari me te tatau i ngā inenga, ngā ātete āhuahanga, ngā ātete āhuahanga, me ngā mata me ngā pihi ā-wāhi o ēnei huānga.
Ka taea te whakamahi whānui i ngā taputapu aroturuki taiaho GTS i roto i ngā mara ine tika ā-wāhi nui, pērā i te ine i te tika o ngā wāhanga rererangi me te huihuinga i roto i te umanga rererangi; te ine i te papatahi, te tika, me te porotaka o ngā taputapu mīhini i roto i te umanga taputapu mīhini; te ine ipurangi i ngā tauira waka i roto i te hanga motuka; me te whakatikatika tika i te tūranga o ngā karetao neke i roto i te hanga teitei. Hei tāpiri, ka taea hoki te whakamahi whānui i ngā taputapu aroturuki taiaho i roto i ngā mara hanga matatau pērā i te hanga kaipuke, te kawe tereina, me te mana karihi.
Ngā Āhuatanga
1. Hoahoa Wāhanga Whakahaere Whakauru: Kua whakauruhia he PTM kaha me te wāhanga whakahaere kiato ki roto i te pane aroturuki taiaho. Mā tēnei hoahoa whakauru ka whakaitihia te maha o ngā taura hono me ngā pouaka kawe, ka tere ake te tāutanga ki te papaanga.
2. Hangarau Maukati Pōro Whāinga Aunoa: Ina motuhia te pūtake mārama, ka rapu aunoa te kāmera maukati whāinga i te pōro whāinga i roto i tētahi wāhi iti, ka tīmata anō te tuku mārama, ā, ka maukati aunoa ki te pōro whāinga. Kāore e hiahiatia he mahi ā-ringa mō te tukanga katoa, ka pai ake te whai huatanga o te ine.
3. Hangarau Whānui HiADM: Ka whakakotahi te hangarau HiADM i te whānuitanga tino pūmau o te taiaho (ADM) me te whānuitanga whakawhiti-ira taiaho (IFM) me te tere hihiri teitei o te whānuitanga whakawhiti-ira taiaho, kia tino tika ai te ine me te whakahohe i te whakaora i te aukati mārama.
4. Teihana Huarere Whakauru: Ka aroturuki aunoa te teihana huarere taiao whakauru, ka whakahou hoki i ngā tawhā huarere taiao, ka whakatikatika i te wā tūturu mō ngā pānga o te pāmahana, te pēhanga hau, me te haumākū ki te taupū whakaata o te taiaho i te rangi, kia tika ai te ine. 5. Whakawhitiwhiti Kōrero Maha: Ka taea e te taputapu te kōrero ki te rorohiko mā roto i ngā tikanga maha, tae atu ki te whakaoho taputapu, te whatunga waea, te WIFI ahokore rānei, e whakahaere ana i te whakamahinga i te papaanga i roto i ngā awheawhe haumaru. Ko te tere putanga raraunga ine mōrahi he 1000 ngā tohu/hekona.
6. Whakatikatika-ā-Whaiaro a te Kaiwhakawaehere: Mā te hangarau whakatikatika-ā-whaiaro a te kaiwhakawaehere kupenga ka taea e te pūnaha te mahi whakatikatika motuhake i te kaiwhakawaehere me te kore he taputapu āwhina o waho. He tino watea te whakatikatika i te papaanga ina huri ngā āhuatanga taiao ine me te tūnga o te taputapu.
7. Kawe Wawe: Mā te hoahoa wae matua kua whakauruhia o te pane aroturuki taiaho me te pouaka kawe taputapu kua whakauruhia, ka hanga te pūnaha kawe katoa kiato, kia māmā, kia ngāwari hoki te whakamahi, ka whakahaere i te kawe i waenga i ngā wāhi mahi rerekē.
8. Hoahoa Parenga Hiri: Mā te whakatauranga parenga IP53 ka tiakina te waeine matua mai i te puehu me ētahi atu poke, kia tino urutau ai ki ngā taiao rerekē.
9. Tūru Pūmau: Mā te hoahoa tūru pūmau, watea hoki e whakarite kia pumau ngā āhuatanga ine whenua. Mā te tikanga hiki atamai ka ngāwari te whakahaere, ā, mā te pūnaha tautoko tūru pūmau ka ārai i te ngaronga o te tika nā ngā wiri taiao.
III. Ngā Whakatakotoranga Hangarau
1. Ngā Whakatakotoranga o te Wāhanga Matua
| Kaupapa | GTS3300 | |
| Ngā Whakatakotoranga Taketake | Te aroturuki i ngā ine o te upoko | 220x280x495 mm |
| Te aroturuki i te taumaha o te upoko | 21.0Kg | |
| Kaiwhakahaere | Whakauruhia | |
| Reera * 1 | 633nm, ImW/CW|Akomanga 2 | |
| Akomanga tiaki | IP53 | |
| Awhe ine | Te radius ine mōrahi | 30 mita |
| Te ahunga whakapae | ±360° | |
| Te ahunga poutū | -145°~+145° | |
| Te tika o te ine *2 | Te tika o te koki *3 | 15μm-6μm/m |
| Te tika o te awhe whakawhiti-waenga | 0.5μm/m | |
| Te tika tino tika o te whānuitanga | 10μm (awhe katoa) | |
| Te tika o te taumata | 2.0" | |
| Te mōhiotanga o te whāinga | Te tawhiti maukati ūnga | 30m |
| Kāmera me te tirohanga whānui | 1.3MP|10° FOV | |
| Te aroturuki i te mahi | Tere whakaputa raraunga | 1000 ngā tohu/hēkona |
| Tere aroturuki mōrahi* | 3 mita/hekona | |
| Te tika o te teihana huarere | Pūoko pāmahana hau | 0.1°C (0-40°C) |
| Pūoko haumākū | 6% (0-95%) | |
| Pūoko pēhanga hau | 0.1kPa | |
| Ngā whakatakotoranga pōro ūnga | Te whānui o te ūnga | 0.5 inihi ~ 1.5 inihi |
| Te tika o te pokapū porowhita* | 3μm~7.5μm | |
| Atanga Whakawhitiwhiti Kōrero | Atanga taura | TCP/IP (Kāwai 5) |
| Atanga ahokore | WLAN (IEEE) 802.11N) | |
| Ngā Whakaritenga Taiao | Te pāmahana whakahaere | 0°C~40°C |
| Teitei | -500~+3500 mita | |
| Makuku whanaunga | 0~95%, kore-whakapūmau | |
| Pūtake Hiko | Momo pūhiko | AC |
| Pūnaha hiko whakahaere | 220+10%VAC, 50/60Hz, 4A, 220W | |
1) E tutuki ana i ngā whakaritenga o te IEC 60825-1 (2014-5) me te whakatutuki i ngā paerewa mahi irahiko.
2) Ko te whakatakotoranga tika ko te hapa nui rawa e whakaaetia ana (MPE), mā te whakamahi i te paerewa 1.5” SMR, me te kore e whakauru i te awe o ngā rerekētanga pāmahana hau.
3) Ko te hapa taha koki e rite ana ki te ISO 10360-10-2016; ko te hapa tūnga ine taha-rua (MPE) e tutuki ana ki te 30μm ± 12μm/m.
4) E tutuki ana i ngā Whakatakotoranga Whakatikatika JJF 1242-2010 mō ngā Pūnaha Ine Taunga Aroturuki Taiaho-Toru.
5) He mea whiriwhiri te whānui o te porowhita ūnga me ngā whakaritenga tika o te pokapū.
2. Rārangi Whirihoranga Hua
| Tau Raupapa | Ingoa | Whakaahuahia | |
| 1 | Kaihautū | Upoko aroturuki | Kotahi te waeine, ka taea te awhe tino tika me te awhe whakawhiti-ira (i runga i te tauira). |
| 2 | Tūru muka waro kawe | 1 waeine, FT-1100-L, Tūru Waka Waro Kawe 1) Ngā waewae muka waro, ka taea te toro atu; 2) Taumata mirumiru whakauru; 3) Te whānuitanga o te whakatikatika teitei: 63-110cm; | |
| 3 | Pouaka kawe tūru muka waro | Kotahi te waeine me te kakau me ngā wira hei whakairi i tētahi tūāpapa muka waro kawe. | |
| 4 | Taura whatunga RJ-45 5m | Kotahi te wahi hei hono i te pane aroturuki me te rorohiko. | |
| 5 | Kete horoi whatu | Kotahi te huinga mō te horoi i te arotahi whakatuwheratanga mārama, me ētahi atu | |
| 6 | Pūwhakakotahi raraunga | Kotahi te huinga mō te kohikohinga tawhā taiao me te whakawhiti raraunga taputapu | |
| 7 | Pouaka kawe wae matua | 1 waeine, hei pupuri i te taputapu aroturuki, me ētahi atu | |
| 8 | Ngā Utauta Whakataurite | tokotoko whakatikatika | 1 waeine, me te pouaka whakatikatika, e whakamahia ana hei tohutoro roa mō te manatoko i te tika o te taputapu |
| 9 | Tūtohi whakarite | 1 waeine, e whakamahia ana mō te whakatikatika ā-wāhi katoa me te whakamātautau i te taputapu | |
| 10 | Pukatuhituhi | Kotahi te huinga, tae atu ki ngā pūmanawa tautoko mō te tātari me te tatau. CPU: I7-10 o ngā whakatupuranga, Mahara: ≥16G | |
| 11 | Whakaata pōro ūnga 1.5” | Kotahi whakaata porowhita ūnga 1.5 inihi te whānui Te whānuitanga o te koki whiwhi: ±25° Taumaha: 170g Hapa pokapū whatu: ±3µm Porowhita: 1.5µm Whānui: 19.05mm ±0.002mm | |
| 12 | Pūtake porowhita whakaata | Maunga Whāinga Momo-Pīni 1.5” | 1. Te whānui o te whāinga 25.4mm, te āputa 25mm, te whānui o te tokotoko 8mm, he kowiri tira. Hei ine i te tūnga o te kōhao |
| 13 | Maunga Whāinga Papatahi 1.5” | 1. Te whānui o te whāinga 40.64mm, te āputa 25mm, he kowiri tira. Mō te ine papatahi | |
| 14 | Maunga Whāinga Tapa 1.5” | 1. Te whānui o te whāinga 40.64mm, te āputa 25mm, he kowiri tira. Mō te ine i te taha | |
| 15 | Maunga Whāinga Whakawhiti 1.5” | 6. Te whānui o te whāinga 40.64mm, te āputa 25mm, te konumohe, te turanga aukume | |
| 16 | Pūmanawa Ine Wāhi | Dongle | 1 waeine |
| 17 | CD Pūmanawa | 1 huinga, Matua Wāhi (64-moka) | |
| 18 | Ētahi atu | Pukapuka tohutohu | 1 pukapuka |
| 19 | Tiwhikete Whakatutukitanga | 1 tārua | |
| 20 | Kāri pūtāhui | 1 tārua | |
| 21 | Tūru-toru taumaha | 1 huinga | |
| 22 | Pūmanawa ine wāhi tuatoru | 1 huinga, Tātari Wāhi (Kōwhiringa Whiriwhiringa Putanga) | |
| 23 | Whakaata porowhita ūnga 0.5" | 1 wahi, whānuitanga koki whiwhi: ±25° Taumaha: 6g Hapa pokapū whatu: ±3µm Porowhita: 1.5µm Whānui: 6.35mm ±0.002mm | |
| 24 | Pūtake porowhita whakaata | Maunga pine ūnga 0.5” | 1 ūnga, 12.7mm te whānui, 10mm te āputa, 8mm te whānui o te tokotoko, he kowiri tira |
| 25 | Maunga ūnga papatahi 0.5” | 1 ūnga, 12.7mm te whānui, 10mm te āputaputa, he kowiri tira | |
| 26 | Maunga ūnga taha 0.5” | 1 ūnga, 12.7mm te whānui, 10mm te āputaputa, he kowiri tira | |
| 27 | Pūrere mana mamao ahokore | 1 huinga, e tautoko ana i te mana mamao o te kohikohi raraunga taputapu, 2.4GHz | |
| 28 | Tiwhikete whakatikatika wae matua | 1 tārua | |
Mō Mātou
Kōtaha o te wheketere
He aha mātou i whiriwhiri ai
Ngā Pātai Auau
P1: Ko wai mātou?
A1: I whakatūria i te tau 2015, kua tipu haere tonu a MSK (Tianjin) Cutting Technology CO.Ltd, ā, kua eke ki te Rheinland ISO 9001.
motuhēhēnga. Me ngā pokapū huri tuaka-rima SACCKE Tiamana, te pokapū tirotiro taputapu tuaka-ono ZOLLER Tiamana, te mīhini PALMARY Taiwan me ētahi atu taputapu hanga matatau o te ao, e whakapau kaha ana mātou ki te whakaputa taputapu CNC kounga teitei, ngaio me te whai hua.
Q2: He kamupene hokohoko koe, he kaihanga rānei?
A2: Ko mātou te wheketere o ngā taputapu carbide.
Q3: Ka taea e koe te tuku hua ki tā mātou Kaihoko Tuku i Haina?
A3: Ae, ki te mea he Kaikawe Tuku kei Haina, ka koa matou ki te tuku hua ki a ia.
Q4: He aha ngā tikanga utu e whakaaetia ana?
A4: I te nuinga o te wā ka whakaaetia e mātou te T/T.
Q5: E whakaae ana koe ki ngā ota OEM?
A5: Ae, kei te wātea te OEM me te whakaritenga, ā, ka whakaratohia hoki e mātou he ratonga tā tapanga.
Q6: He aha koe me whiriwhiri ai i a mātou?
A6:1) Te whakahaere utu - te hoko i ngā hua kounga teitei i te utu e tika ana.
2) Whakautu tere - i roto i ngā haora 48, ka tukuna atu e ngā kaimahi ngaio he whakatau utu me te aro atu ki ō āwangawanga.
3) Te kounga teitei - E whakaatu pono ana te kamupene he tino kounga teitei ngā hua e tukuna ana e rātou.
4) Ratonga muri-hoko me te aratohu hangarau - Ka whakaratohia e te kamupene te ratonga muri-hoko me te aratohu hangarau e ai ki ngā hiahia me ngā matea o te kiritaki.
