I-Laser Tracker Enkulu Ephathekayo | Inkqubo Yokulinganisa I-3D Echanekileyo Kakhulu Yezimboni
I-Metrology Echanekileyo ye-Aerospace, iMoto kunye noShishino olunzima
I-laser tracker yethu enkulu ephathekayo inika umlinganiselo we-3D coordinate ochanekileyo kakhulu kwizicelo zemizi-mveliso ezifuna ukwenziwa. Yenziwe njengomatshini wokulinganisa we-optical CMM (umatshini wokulinganisa odibeneyo), le nkqubo ye-laser tracker ivumela ukulinganiswa kwerobhothi ngokuchanekileyo, ukulungelelaniswa kwemisebenzi emikhulu, kunye nokuhlolwa komgangatho ngexesha langempela kuzo zonke iindiza, ukuveliswa kweemoto, ukuthutha oololiwe, kunye namacandelo oomatshini abanzima.
Kutheni Ukhetha I-Laser Tracker Yethu?
Ukuchaneka Okuphezulu: Fumana ukuchaneka kwinqanaba le-micrometer
Uyilo Oluphathekayo: Kulula ukuluthutha nokulubeka kumgangatho wefektri okanye kwiindawo zomsebenzi zangaphandle.
Izixhobo Ezininzi: Zilungele ubunjineli obubuyela umva, ukuqinisekiswa kwendibano, kunye nokulungelelaniswa komatshini.
Umenzi oThembekileyo: Amaxabiso ngqo avela kumatshini ngenkxaso ye-OEM kunye nokuthunyelwa kwempahla kwihlabathi liphela.
Lungiselela indlela osebenza ngayo umsebenzi wakho we-metrology yemizi-mveliso ngesisombululo esithembekileyo ngababoneleli abaphambili be-laser tracker. Nokuba ufuna i-laser tracker ephathekayo ethengiswayo okanye inkqubo ye-laser tracker yemizi-mveliso eyenzelwe wena, sinikezela ngokusebenza okuthembekileyo ngexabiso elikhuphisanayo le-laser tracker.
Qhagamshelana nathi namhlanje ukuze ufumane isaphulelo okanye ingcebiso yobugcisa.
Intshayelelo yeMveliso
I-laser tracker isetyenziswa kakhulu ekulinganiseni ngokuchanekileyo ii-coordinates ezinemilinganiselo emithathu kwiindawo ezinkulu (ukuya kuthi ga kwiimitha ezili-100). Idibanisa iteknoloji ye-laser interferometric ranging, iteknoloji yokufumanisa i-photoelectric, iteknoloji yoomatshini obuchanekileyo, iteknoloji yekhompyutha kunye nolawulo, kunye nethiyori yokubala yamanani yanamhlanje. Sesona sixhobo senzululwazi yezoshishino esichanekileyo nesibalulekileyo sokulinganisa indawo enkulu, kwaye sisixhobo sodwa se-photoelectric esisebenza kakuhle ngaxeshanye esinobuchane be-μm-level kunye nendawo yokusebenza ye-100-meter. I-laser tracker ingasetyenziselwa usetyenziso olufana nokulinganisa ubukhulu, ukufakela, ukubeka indawo, ukulinganisa, kunye nobunjineli obubuyela umva, okwenza ukuba ibe sisixhobo esinamandla se-metrology kunye novavanyo.
Inkqubo yokulandelela i-laser ye-GTS iqulathe ikhompyutha, isikhululo sokulinganisa umkhondo, kunye nesipili esijolise kuko. Idibanisa imilinganiselo ye-engile kunye nomgama kumacala omabini athe tye nathe nkqo ukuze yenze inkqubo yokulinganisa i-spherical coordinate. Isipili esijolise kuko sifumana ulwazi lwendawo yokulinganisa izinto zejometri yendawo, kwaye isoftware yohlalutyo lwedatha ye-3D yenza uhlalutyo kunye nokubala kubungakanani, ukunyamezelana kobukhulu, ukunyamezelana kobukhulu, kunye nemiphezulu yendawo kunye nee-curves zezi zinto.
Ii-GTS laser trackers zingasetyenziswa kakhulu kwiindawo ezahlukeneyo zokulinganisa ngokuchanekileyo kwendawo, njengokulinganisa ukuchaneka kweendawo zeenqwelo moya kunye nokuhlanganiswa kwazo kwishishini leenqwelo moya; ukulinganisa ukuthamba, ukuthe tye, kunye nokuqina kwezixhobo zoomatshini kwishishini lezixhobo zoomatshini; ukulinganisa kwi-intanethi iimodeli zezithuthi kwimveliso yeemoto; kunye nokulinganisa ngokuchanekileyo indawo yeerobhothi ezihambayo kwimveliso ephezulu. Ukongeza, ii-laser trackers zingasetyenziswa kakhulu kwiindawo zokuvelisa eziphambili ezifana nokwakha iinqanawa, ukuthutha oololiwe, kunye namandla enyukliya.
Iimbonakalo
1. Uyilo lweYunithi yoLawulo oluDibeneyo: I-CPU enamandla kunye neyunithi yolawulo encinci zifakwe kwintloko yokulandelela i-laser. Olu yilo oludibeneyo lunciphisa kakhulu inani leentambo ezidibanisayo kunye neekheyisi zokuthwala, nto leyo eququzelela ukufakwa ngokukhawuleza kwindawo.
2. Ubuchwepheshe bokukhiya ibhola ekujoliswe kuyo ngokuzenzekelayo: Xa umthombo wokukhanya uphazamisekile, ikhamera ekhiya ekujoliswe kuyo ikhangela ibhola ekujoliswe kuyo ngokuzenzekelayo kwindawo encinci, iqalise ukusasazwa kokukhanya, ize itshixe ngokuzenzekelayo kwibhola ekujoliswe kuyo. Yonke le nkqubo ayifuni kusebenza ngesandla, nto leyo ephucula ukusebenza kakuhle kokulinganisa.
3. Iteknoloji yeHiADM Ranging: Iteknoloji yeHiADM idibanisa i-laser absolute ranging (ADM) kunye ne-laser interferometric ranging (IFM) kunye nesantya esiphezulu se-laser interferometric ranging, ukuqinisekisa ukuchaneka kokulinganisa okugqwesileyo kunye nokwenza ukuba ukukhanya kuphinde kubuye.
4. Isikhululo seMozulu esiDibeneyo: Isikhululo semozulu esiDibeneyo sijonga ngokuzenzekelayo kwaye sihlaziye iiparameter zemozulu, sihlawulela ngexesha langempela imiphumo yobushushu, uxinzelelo lomoya, kunye nokufuma kwisalathisi sokuchaneka kwelaser emoyeni, siqinisekisa ukuchaneka kokulinganisa. 5. Unxibelelwano lweMultiComm: Isixhobo sinokunxibelelana nekhompyutha ngeendlela ezahlukeneyo, kubandakanya ukuqalisa i-hardware, inethiwekhi enentambo, okanye i-WIFI engenazingcingo, okwenza kube lula ukusetyenziswa kwindawo yokusebenzela ekhuselekileyo. Isantya esiphezulu sokulinganisa idatha yi-1000 points/second.
6. Ukuzilinganisa nge-Encoder: Itekhnoloji yokuzilinganisa nge-encoder ye-grating ivumela inkqubo ukuba yenze ukulinganiswa kwe-encoder ngokuzimela ngaphandle kwezixhobo ezincedisayo zangaphandle. Ukulinganiswa kwindawo kulungele ngakumbi xa kulinganiswa iimeko zokusingqongileyo kunye nesimo sesixhobo sitshintsha.
7. Uthutho Oluphathekayo: Uyilo oludibeneyo lweyunithi ephambili yentloko yokulandelela i-laser kunye nebhokisi yothutho oludibeneyo lwenza yonke inkqubo yothutho ibe ncinci, ilula, kwaye isebenziseke lula, nto leyo eyenza kube lula uthutho phakathi kweendawo ezahlukeneyo zomsebenzi.
8. Uyilo loKhuseleko oluValiweyo: Uvavanyo lokhuseleko lwe-IP53 luqinisekisa ukuba iyunithi ephambili ikhuselekile eluthulini nakwezinye izinto ezingcolisayo, nto leyo eyenza ukuba ikwazi ukuzivumelanisa nezimo ezahlukeneyo.
9. I-Tripod Ezinzileyo: Uyilo lwe-tripod kunye ne-chassis ezizinzileyo nezilula ziqinisekisa iimeko zokulinganisa umhlaba ezizinzileyo. Indlela yokuphakamisa enobuchule ivumela ukusebenza ngokulula, kwaye inkqubo yokuxhasa i-tripod eqinileyo ithintela ukulahleka kokuchaneka ngenxa yokungcangcazela kwendalo.
III. Iinkcukacha zobugcisa
1. Iinkcukacha zeYunithi ePhambili
| Iprojekthi | I-GTS3300 | |
| Iinkcukacha eziSiseko | Ubukhulu bentloko yokulandelela | 220x280x495 mm |
| Ukulandelela ubunzima bentloko | 21.0Kg | |
| Umlawuli | Idibeneyo | |
| Ileza*1 | I-633nm, ImW/CW|Iklasi yesi-2 | |
| Udidi lokhuseleko | IP53 | |
| Uluhlu lokulinganisa | Irediyasi yokulinganisa ephezulu | Iimitha ezingama-30 |
| Isikhokelo esithe tye | ±360° | |
| Isikhokelo esithe nkqo | -145°~+145° | |
| Ukuchaneka komlinganiselo *2 | Ukuchaneka kwe-engile*3 | 15μm-6μm/m |
| Ukuchaneka kobubanzi be-interferometric | 0.5μm/m | |
| Ukuchaneka okupheleleyo koluhlu | 10μm (uluhlu olupheleleyo) | |
| Ukuchaneka kwenqanaba | 2.0" | |
| Ukuqatshelwa kwethagethi | Umgama wokutshixa ithagethi | 30m |
| Ikhamera kunye nommandla wombono | 1.3MP|10° FOV | |
| Ukulandelela ukusebenza | Isantya sokuphuma kwedatha | Amanqaku ali-1000 ngomzuzwana |
| Isantya esiphezulu sokulandelela* | Iimitha ezi-3/isekondi | |
| Ukuchaneka kwesikhululo semozulu | Inzwa yobushushu bomoya | 0.1°C (0-40°C) |
| Inzwa yokufuma komoya | 6% (0-95%) | |
| Inzwa yoxinzelelo lomoya | 0.1kPa | |
| Iinkcukacha zebhola ekujoliswe kuyo | Ububanzi bokujolisa | 0.5 intshi ~ 1.5 intshi |
| Ukuchaneka kweziko le-sphere* | 3μm~7.5μm | |
| Unxibelelwano lweNdawo yoNxibelelwano | Ujongano lwekhebula | I-TCP/IP (Cat5) |
| Ujongano olungenazingcingo | I-WLAN (IEEE) 802.11N) | |
| Iimfuneko zeNdalo | Ubushushu bokusebenza | 0°C~40°C |
| Ukuphakama | -500~+3500 yeemitha | |
| Ubuntu bezizalwane | 0~95%, ayifumi | |
| Ukunikezwa Amandla | Uhlobo lobonelelo lwamandla | AC |
| Umbane osebenzayo | 220+10%VAC, 50/60Hz, 4A, 220W | |
1) Iyahambelana ne-IEC 60825-1 (2014-5) kwaye iyahlangabezana nemigangatho yokusebenza kwemitha.
2) Inkcazo yokuchaneka yimpazamo ephezulu evumelekileyo (MPE), kusetyenziswa i-SMR esemgangathweni eyi-1.5”, ngaphandle kwempembelelo yokutshintsha kobushushu bomoya.
3) Impazamo yecala eliyi-angular ihambelana ne-ISO 10360-10-2016; impazamo yendawo yokulinganisa enamacala amabini (MPE) ifikelela kwi-30μm ± 12μm/m.
4) Iyahambelana ne-JJF 1242-2010 Calibration Specification ye-Laser Tracking Three-Dimensional Coordinate Measurement Systems.
5) Ububanzi be-target sphere kunye neenkcukacha zokuchaneka kweziko azinyanzelekanga.
2. Uluhlu loCwangciso lweMveliso
| Inombolo yesiriyeli | Igama | Chaza | |
| 1 | Umamkeli | Intloko yokulandelela | Iyunithi enye, ekwaziyo ukwenza zombini i-absolute ranging kunye ne-interferometric ranging (kuxhomekeke kwimodeli). |
| 2 | I-tripod yekhabhoni ephathwayo enefayibha yekhabhoni | Iyunithi e-1, i-FT-1100-L, i-Tripod yeCarbon Fiber ephathekayo 1) Imilenze yefayibha yekhabhoni, inokwandiswa; 2) Inqanaba leqamza elidibeneyo; 3) Uluhlu lohlengahlengiso lobude: 63-110cm; | |
| 3 | Ityala lothutho lwe-tripod ye-carbon fiber | Iyunithi enye enesiphatho kunye namavili okufakela i-tripod yekhabhoni ephathekayo. | |
| 4 | Intambo yenethiwekhi ye-RJ-45 5m | Inxalenye enye yokudibanisa intloko yokulandelela kunye nekhompyutha. | |
| 5 | Ikhithi yokucoca nge-optical | Iseti enye yokucoca ilensi yokuvula ekhupha ukukhanya, njl. | |
| 6 | Isixinisi sedatha | Iseti enye yokufumana iiparameter zokusingqongileyo kunye nokutshintshiselana kwedatha yezixhobo | |
| 7 | Ibhokisi yothutho yeyunithi ephambili | Iyunithi e-1, yokubamba iprobe yokulandelela, njl.njl. | |
| 8 | Izixhobo zoLungiso | Intonga yokulinganisa | Iyunithi e-1, enebhokisi yokulinganisa, esetyenziswa njengesalathiso sobude bokuqinisekisa ukuchaneka kwesixhobo |
| 9 | I-tripod yokulinganisa | Iyunithi e-1, esetyenziselwa ukulinganisa indawo epheleleyo kunye nokuvavanya isixhobo | |
| 10 | Incwadi yamanqaku | Iseti enye, kuquka nesoftware exhasayo yohlalutyo kunye nokubala. I-CPU: Isizukulwana se-I7-10, Imemori: ≥16G | |
| 11 | Isixhobo sokubonisa ibhola ekujoliswe kuyo esiyi-1.5” | Isixhobo esinye sokubonisa i-sphere esijolise kuso esiyi-1.5” Uluhlu lwe-engile yokufumana: ±25° Ubunzima: 170g Impazamo yeziko le-Optical: ±3µm Ububanzi: 1.5µm Irediyasi: 19.05mm ± 0.002mm | |
| 12 | Isiseko sesphere esibonakalayo | Ithagethi yohlobo lwePin eyi-1.5” | 1. Ububanzi obujoliswe kuyo yi-25.4mm, i-offset yi-25mm, ububanzi bentonga yi-8mm, intsimbi engatyiwayo. Ukulinganisa indawo yomngxuma |
| 13 | I-Planar Target Mount eyi-1.5” | 1. Ububanzi bethagethi yi-40.64mm, i-offset yi-25mm, intsimbi engatyiwayo. Yokulinganisa iplane | |
| 14 | Ithagethi yokuHamba yoMda we-1.5” | 1. Ububanzi obujoliswe kuyo yi-40.64mm, i-offset yi-25mm, intsimbi engatyiwayo. Ukulinganisa umphetho | |
| 15 | I-1.5” yokuGqithisela iTarget Mount | 6. Ububanzi bokujolisa obuyi-40.64mm, i-offset eyi-25mm, i-aluminium, isiseko semagnethi | |
| 16 | Isoftware yokulinganisa isithuba | I-Dongle | Iyunithi e-1 |
| 17 | I-CD yeSoftware | Iseti e-1, iSpatial Master (64-bit) | |
| 18 | Okunye | Incwadi yemiyalelo | Incwadi e-1 |
| 19 | Isatifikethi sokuvumelana | Ikopi e-1 | |
| 20 | Ikhadi lewaranti | Ikopi e-1 | |
| 21 | I-tripod enzima | Iseti e-1 | |
| 22 | Isoftware yokulinganisa indawo yomntu wesithathu | Iseti e-1, Uhlalutyo lweNdawo (Ukhetho lweNgxoxo yoHlelo) | |
| 23 | Isibonisi sesphere esijolise kuso esingu-0.5" | Iqhekeza eli-1, uluhlu lwe-engile yokufumana: ±25° Ubunzima: 6g Impazamo yeziko le-Optical: ±3µm Ububanzi: 1.5µm Irediyasi: 6.35mm ± 0.002mm | |
| 24 | Isiseko sesphere esibonakalayo | Iphini yokufakelwa ekujoliswe kuyo eyi-0.5” | Ithagethi e-1, ububanzi obuyi-12.7mm, i-offset eyi-10mm, ububanzi bentonga obuyi-8mm, intsimbi engatyiwayo |
| 25 | I-0.5” yokuxhoma ekujoliswe kuyo ejikelezileyo | Ithagethi e-1, ububanzi obuyi-12.7mm, i-offset eyi-10mm, intsimbi engatyiwayo | |
| 26 | I-0.5” yokuxhoma ekujoliswe kuyo | Ithagethi e-1, ububanzi obuyi-12.7mm, i-offset eyi-10mm, intsimbi engatyiwayo | |
| 27 | Isixhobo sokulawula kude esingenantambo | Iseti e-1, exhasa ulawulo olukude lokufunyanwa kwedatha yesixhobo, i-2.4GHz | |
| 28 | Isatifikethi sokulinganisa iyunithi ephambili | Ikopi e-1 | |
Ngathi
Iprofayile yeFektri
Kutheni Ukhetha Thina
FAQ
Q1: Singoobani thina?
I-A1: Yasekwa ngo-2015, i-MSK (Tianjin) Cutting Technology CO.Ltd ikhule ngokuqhubekayo kwaye yadlula kwi-Rheinland ISO 9001
ukuqinisekiswa. Ngeziko zokugaya ze-SACCKE zaseJamani ezine-axis ezintlanu eziphezulu, iziko lokuhlola izixhobo ze-ZOLLER zaseJamani ezine-axis ezintandathu, umatshini weTaiwan PALMARY kunye nezinye izixhobo zokwenza iimveliso eziphambili zamazwe ngamazwe, sizibophelele ekuveliseni izixhobo ze-CNC eziphezulu, zobungcali nezisebenzayo.
Q2: Ngaba urhweba ngenkampani okanye umenzi?
A2: Singumzi-mveliso wezixhobo ze-carbide.
Umbuzo 3: Ngaba ungathumela iimveliso kwi-Forwarder yethu eTshayina?
A3: Ewe, ukuba une-Forwarder eTshayina, singakuvuyela ukumthumelela iimveliso.
Q4: Ngawaphi amanqanaba okuhlawula amkelekileyo?
A4: Ngokwesiqhelo siyayamkela i-T/T.
Q5: Ngaba uyazamkela ii-odolo ze-OEM?
A5: Ewe, i-OEM kunye nokwenza ngokwezifiso ziyafumaneka, kwaye sikwabonelela ngenkonzo yokuprinta ilebheli.
Umbuzo 6: Kutheni ufanele ukhethe thina?
A6:1) Ulawulo lweendleko - ukuthenga iimveliso ezikumgangatho ophezulu ngexabiso elifanelekileyo.
2) Impendulo ekhawulezileyo - zingadlulanga iiyure ezingama-48, abasebenzi abaziingcali baya kukunika ikowuteshini baze bajongane neengxaki zakho.
3) Umgangatho ophezulu - Le nkampani isoloko iqinisekisa ngeenjongo ezinyanisekileyo ukuba iimveliso ebonelela ngazo zikumgangatho ophezulu ngokupheleleyo.
4) Inkonzo yokuthenga emva kokuthengisa kunye nesikhokelo sobugcisa - Le nkampani inika inkonzo yokuthenga emva kokuthengisa kunye nesikhokelo sobuchwepheshe ngokweemfuno neemfuno zabathengi.
Thumela umyalezo wakho kuthi:
-
Umatshini wokugrumba iTleeve Flat Radial odinayo
-
Iidrill zokuKhangela ze-HRC55 CNC
-
Iibhithi ze-HSS Straight Shank Twist Drill M2 zePrec ...
-
Izixhobo zombane ezithengiswayo ngobuninzi ezitshajwayo drill cor ...
-
Ukuqina kwe-SP 5XD Indexable Drill kungcono
-
Ukugqiba iChipbreaker Carbide VNMG160404 CNC La...
