Raad-raaca Laser-ka Cabbirka Weyn ee La Qaadan Karo | Nidaamka Cabbirka Warshadaha 3D ee Saxnaanta Sare leh
METROGOLOGY SAX AH OO LOOGU TALAGALAY HAWADA, BAABUURTA & WARSHADAHA CUNNADA LEH
Raad-raaca laser-ka ee baaxadda weyn ee la qaadi karo wuxuu bixiyaa cabbiraadda isku-dubaridka 3D ee saxnaanta sare leh ee loogu talagalay codsiyada warshadaha ee adag. Iyadoo loo sameeyay sidii mashiinka cabbiraadda isku-dubaridka indhaha (CMM) (mashiinka cabbiraadda isku-dubaridka), nidaamkan raad-raaca laysarka wuxuu suurtogal ka dhigayaa hagaajinta robot-ka saxda ah, isku-dubaridka shaqada weyn, iyo kormeerka tayada waqtiga-dhabta ah ee hawada sare, wax-soo-saarka baabuurta, gaadiidka tareenka, iyo qaybaha mishiinnada culus.
Maxaad u Dooranaysaa Raad-raaca Laser-kayaga?
Saxnaan Sare: Gaar saxnaan heer-mikrometer ah
Naqshad La Qaadan Karo: Si fudud ayaa loogu qaadi karaa oo loogu dejin karaa dabaqa warshadda ama goobaha shaqada ee bannaanka.
Adeegsiyo Kala Duwan: Ku habboon injineernimada dib-u-soo-celinta, xaqiijinta isu-imaatinka, iyo isku-dubaridka mashiinka.
Soo-saare la aamini karo: Qiimaha tooska ah ee warshadda oo leh taageerada OEM iyo dhoofinta caalamiga ah.
Hagaaji shaqadaada metrology-ga warshadaha adigoo isticmaalaya xal ay ku kalsoon yihiin alaab-qeybiyeyaasha hormuudka ka ah raadraaca laser-ka. Hadday tahay inaad u baahan tahay raadraaca laser-ka la qaadi karo oo iib ah ama nidaam raadraaca laser-ka warshadaha ee gaarka loo leeyahay, waxaanu bixinaa waxqabad la isku halleyn karo oo leh kharashka raadraaca laser-ka ee tartanka leh.
Nala soo xiriir maanta si aad u hesho qiimeyn ama la-tashi farsamo.
Hordhac Badeecada
Raad-raaca laysarka waxaa ugu horreyn loo isticmaalaa cabbiraadda saxda ah ee isku-duwayaasha saddex-geesoodka ah ee jawiyada baaxadda weyn (ilaa 100 mitir). Waxay isku daraysaa tignoolajiyada kala-soocidda laysarka ee interferometric, tignoolajiyada ogaanshaha sawir-qaadista, tignoolajiyada farsamada saxda ah, tignoolajiyada kombiyuutarka iyo xakamaynta, iyo aragtida xisaabinta tirooyinka casriga ah. Waa qalabka sayniska warshadaha ugu saxsan uguna muhiimsan ee cabbirka booska ballaaran, waana qalabka kaliya ee sawir-qaadista waxqabadka sare leh isla mar ahaantaana leh saxnaanta heerka μm iyo booska shaqada ee 100-mitir. Raad-raaca laysarka waxaa loo isticmaali karaa codsiyada sida cabbirka cabbirka, rakibidda, meelaynta, hagaajinta, iyo injineernimada dib-u-celinta, taasoo ka dhigaysa qalab cabbir iyo tijaabo oo awood leh.
Nidaamka raadraaca laysarka GTS wuxuu ka kooban yahay kombiyuutar, saldhig cabbiraad raadraac, iyo muraayad bartilmaameed ah. Waxay isku daraysaa cabbiraadaha xagasha iyo masaafada labadaba jihooyin toosan iyo kuwo toosan si ay u sameeyaan nidaam cabbiraad isku-dubbarid wareegsan. Muraayadda bartilmaameedku waxay heshaa macluumaadka barta cabbirka ee walxaha joomatari ee booska, barnaamijka falanqaynta xogta 3D-na wuxuu sameeyaa falanqaynta iyo xisaabinta cabbirrada, dulqaadka cabbirka, dulqaadka joomatari, iyo dusha sare iyo qaloocyada booska ee walxahan.
Raad-raacayaasha laysarka GTS waxaa si weyn loogu isticmaali karaa goobo cabbiraad sax ah oo baaxad weyn leh, sida cabbiraadda saxnaanta qaybaha diyaaradaha iyo isu-imaatinka warshadaha hawada sare; cabbiraadda fidsanaanta, toosanaanta, iyo wareegga qalabka mashiinka ee warshadaha qalabka mashiinka; cabbirka khadka tooska ah ee moodooyinka baabuurta ee wax soo saarka baabuurta; iyo cabbiraadda saxda ah ee booska robotyada dhaqaaqa ee wax soo saarka heerka sare ah. Intaa waxaa dheer, raad-raacayaasha laysarka ayaa sidoo kale si weyn loogu isticmaali karaa goobaha wax soo saarka ee horumarsan sida dhismaha maraakiibta, gaadiidka tareenka, iyo tamarta nukliyeerka.
Astaamaha
1. Naqshadeynta Unugga Xakamaynta ee Isku-dhafan: CPU awood leh iyo cutub koontarool oo isku-dhafan ayaa lagu dhex daray madaxa raadraaca laysarka. Naqshaddan isku-dhafan waxay si weyn u yareysaa tirada fiilooyinka isku xira iyo kiisaska sidda, taasoo sahlaysa rakibidda degdega ah ee goobta.
2. Tiknoolajiyada Tooska ah ee Kubbadda Bartilmaameedka: Marka isha iftiinka la joojiyo, kamaradda qufulka bartilmaameedka ah ayaa si toos ah u raadinaysa kubbadda bartilmaameedka ah meel yar gudaheed, waxay dib u bilaabaysaa gudbinta iftiinka, waxayna si toos ah ugu xirmaysaa kubbadda bartilmaameedka ah. Geedi socodka oo dhan uma baahna hawlgal gacan-ku-taag ah, taasoo hagaajinaysa hufnaanta cabbirka.
3. Tiknoolajiyadda Kala-soocidda HiADM: Tiknoolajiyadda HiADM waxay isku daraysaa kala-soocidda laser-ka oo dhammaystiran (ADM) iyo kala-soocidda laser-ka (IFM) oo leh xawaaraha firfircoon ee sare ee kala-soocidda laser-ka, taasoo hubinaysa saxnaanta cabbirka ee aadka u fiican iyo suurtogalinta soo kabashada xannibaadda iftiinka.
4. Saldhigga Cimilada Isku-dhafan: Saldhigga cimilada deegaanka ee isku-dhafan ayaa si toos ah ula socda oo u cusbooneysiiya xuduudaha saadaasha hawada deegaanka, isagoo waqtiga dhabta ah magdhow ka bixinaya saameynta heerkulka, cadaadiska hawada, iyo qoyaanka ee tusmada iftiinka ee laysarka hawada ku jira, taasoo hubinaysa saxnaanta cabbirka. 5. Isgaarsiinta MultiComm: Qalabku wuxuu la xiriiri karaa kombiyuutarka iyada oo loo marayo habab kala duwan, oo ay ku jiraan kicinta qalabka, shabakadda fiilooyinka leh, ama WIFI wireless, taasoo fududeyneysa isticmaalka goobta ee aqoon-is-weydaarsiyada amniga ah. Xawaaraha ugu badan ee soo saarista xogta cabbirka waa 1000 dhibcood/ilbiriqsi.
6. Is-hagaajinta Is-hagaajinta ee Encoder-ka: Tiknoolajiyadda is-hagaajinta ee encoder-ka shabagga ayaa u oggolaanaysa nidaamku inuu si madax-bannaan u sameeyo habaynta encoder-ka iyada oo aan lahayn qalab kaabayaal dibadeed. Habaynta goobta ayaa si gaar ah ugu habboon marka xaaladaha deegaanka ee cabbiraadda iyo xaaladda qalabku isbeddelaan.
7. Gaadiidka La Qaadan Karo: Naqshadeynta cutubka ugu muhiimsan ee isku dhafan ee madaxa raadraaca laysarka iyo kiiska gaadiidka ee isku dhafan ayaa ka dhigaya nidaamka gaadiidka oo dhan mid isku dhafan, fudud, oo aad u fudud in la isticmaalo, taasoo sahlaysa gaadiidka u dhexeeya goobaha shaqada ee kala duwan.
8. Naqshadeynta Ilaalinta Shaabadaysan: Qiimaynta ilaalinta IP53 waxay hubineysaa in cutubka ugu weyn laga ilaaliyo boodhka iyo wasakhda kale, taasoo ka dhigaysa mid aad ugu habboon deegaanno kala duwan.
9. Tripod Xasilloon: Naqshadeynta tripod-ka iyo chassis-ka deggan oo ku habboon waxay hubisaa xaaladaha cabbirka dhulka oo deggan. Habka kor u qaadista caqliga leh wuxuu u oggolaanayaa hawlgal aan dadaal lahayn, nidaamka taageerada tripod-ka ee adagna wuxuu ka hortagaa luminta saxnaanta sababtoo ah gariirka deegaanka.
III. Tilmaamaha Farsamada
1. Qeexitaannada Cutubka Ugu Muhiimsan
| Mashruuc | GTS3300 | |
| Qeexitaannada Aasaasiga ah | Cabbirka madaxa ee la socodka | 220x280x495 mm |
| La socodka miisaanka madaxa | 21.0Kg | |
| Xakameeye | Isku dhafan | |
| Laysar *1 | 633nm, ImW/CW| Fasalka 2aad | |
| Fasalka Ilaalinta | IP53 | |
| Kala duwanaanshaha cabbirka | Gacanka cabbirka ugu badan | 30 mitir |
| Jihada Jiifka ah | ±360° | |
| Jihada toosan | -145°~+145° | |
| Saxnaanta cabbirka *2 | Saxnaanta xagasha*3 | 15μm-6μm/m |
| Saxnaanta kala-goynta Interferometric | 0.5μm/m | |
| Saxnaan buuxda oo kala duwan | 10 μm (nooc buuxa) | |
| Saxnaanta heerka | 2.0" | |
| Aqoonsiga Bartilmaameedka | Masaafada qufulka bartilmaameedka | 30m |
| Kamarada iyo aragtida | 1.3MP| 10° FOV | |
| La socodka waxqabadka | Xawaaraha soo saarista xogta | 1000 dhibcood/ilbiriqsi |
| Xawaaraha ugu badan ee raadraaca* | 3 mitir/ilbiriqsi | |
| Saxnaanta saldhigga cimilada | Dareemaha heerkulka hawada | 0.1°C (0-40°C) |
| Dareemaha qoyaanka hawada | 6% (0-95%) | |
| Dareemaha cadaadiska hawada | 0.1kPa | |
| Tilmaamaha kubadda bartilmaameedka | Dhexroorka bartilmaameedka | 0.5 inji ~ 1.5 inji |
| Saxnaanta bartamaha wareegga* | 3μm ~ 7.5μm | |
| Is-dhexgalka Isgaarsiinta | Is-dhexgalka fiilada | TCP/IP (Cat5) |
| Interface wireless ah | WLAN (IEEE) 802.11N) | |
| Shuruudaha Deegaanka | Heerkulka hawlgalka | 0°C~40°C |
| Joog sare | -500~+3500 mitir | |
| Qoyaan qaraabo ah | 0 ~ 95%, aan isku milmin | |
| Koronto Bixinta | Nooca korontada | AC |
| Korontada shaqaynaysa | 220+10%VAC, 50/60Hz, 4A, 220W | |
1) Waxay u hoggaansan tahay IEC 60825-1 (2014-5) waxayna buuxisaa heerarka waxqabadka shucaaca.
2) Tilmaamaha saxnaanta waa qaladka ugu badan ee la oggol yahay (MPE), iyadoo la adeegsanayo heerka 1.5” SMR, marka laga reebo saameynta kala duwanaanshaha heerkulka hawada.
3) Khaladka dhinaca geeska ah wuxuu waafaqsan yahay ISO 10360-10-2016; khaladka booska cabbirka ee laba-geesoodka ah (MPE) wuxuu gaarayaa 30μm ± 12μm/m.
4) Waxay u hoggaansan tahay JJF 1242-2010 Tilmaamaha Kala-hagaajinta ee Nidaamyada Cabbirka Isku-dubaridka Saddex-cabbir ee Dabagalka Laser-ka.
5) Dhexroorka bartilmaameedka iyo qeexitaannada saxnaanta dhexe waa ikhtiyaari.
2. Liiska Habaynta Badeecada
| Lambarka Taxanaha | Magaca | Sharax | |
| 1 | Martigeliyaha | Madaxa raadraaca | Hal cutub, oo awood u leh kala-goynta buuxda iyo kala-goynta interferometric labadaba (iyadoo ku xiran nooca). |
| 2 | Tripod-ka kaarboon ee la qaadan karo | 1 unug, FT-1100-L, Tripod Kaarboon Fiber ah oo la qaadan karo 1) Lugaha fiilada kaarboonka, oo la fidin karo; 2) Heerka xumbo ee isku dhafan; 3) Kala duwanaanshaha hagaajinta dhererka: 63-110cm; | |
| 3 | kiiska gaadiidka tripod fiber kaarboon | Hal qalab oo leh gacan iyo giraangiraha lagu rakibayo saddex-geesood oo fiilada kaarboonka ah oo la qaadi karo. | |
| 4 | Fiilada shabakadda RJ-45 5m | Hal gabal oo loogu talagalay isku xirka madaxa raadraaca iyo kombiyuutarka. | |
| 5 | Qalabka nadiifinta indhaha | Hal qalab oo lagu nadiifiyo muraayadda furan ee iftiinka soo saarta, iwm. | |
| 6 | Ururinta xogta | Hal set oo loogu talagalay helitaanka xuduudaha deegaanka iyo is-weydaarsiga xogta qalabka | |
| 7 | Sanduuqa gaadiidka ee cutubka ugu weyn | 1 cutub, oo loogu talagalay qabashada baaritaanka raadraaca, iwm. | |
| 8 | Qalabka Kala-hagaajinta | Usha hagaajinta | 1 cutub, oo leh sanduuq hagaajin ah, oo loo isticmaalo tixraaca dhererka si loo xaqiijiyo saxnaanta qalabka |
| 9 | Saddex-geesood oo kala-hagaajin ah | 1 cutub, oo loo isticmaalo habaynta booska buuxa iyo tijaabinta qalabka | |
| 10 | Xusuus-qor | Hal set, oo ay ku jiraan software-ka taageeraya falanqaynta iyo xisaabinta. CPU: Jiilka I7-10aad, Xusuusta: ≥16G | |
| 11 | 1.5" iftiinta kubbadda bartilmaameedka ah | Hal iftiin-celiye oo bartilmaameed ah oo 1.5" ah Kala duwanaanshaha xagasha helitaanka: ±25° Miisaanka: 170g Khalad dhexda indhaha ah: ±3µm Baaxadda: 1.5µm Gacanka: 19.05mm ±0.002mm | |
| 12 | Saldhigga wareegga milicsiga | 1.5" Nooca Pin-ka ah ee Bartilmaameedka | 1. Dhexroorka bartilmaameedka 25.4mm, 25mm oo ka baxsan, dhexroorka usha 8mm, bir aan miridh lahayn. Cabbirka booska godka |
| 13 | 1.5" Qalabka Bartilmaameedka ee Qoryaha leh | 1. Dhexroorka bartilmaameedka 40.64mm, 25mm oo ka baxsan, bir aan miridh lahayn. Cabbiraadda diyaaradda | |
| 14 | 1.5" End Target Mount | 1. Dhexroorka bartilmaameedka 40.64mm, 25mm oo ka baxsan, bir aan miridh lahayn. Cabbirka geeska | |
| 15 | 1.5" Ku rakibida Bartilmaameedka Gudbinta | 6. Dhexroorka bartilmaameedka 40.64mm, 25mm oo ka baxsan, aluminium, saldhig birlab ah | |
| 16 | Barnaamijka Cabbirka Hawada Sare | Dongle | 1 cutub |
| 17 | CD-ga Software-ka | 1 set, Master-ka Heerka Sare (64-bit) | |
| 18 | Kale | Buug-tilmaameedka tilmaamaha | 1 buug |
| 19 | Shahaadada u hoggaansanaanta | 1 nuqul | |
| 20 | Kaarka damaanadda | 1 nuqul | |
| 21 | Tripod-ka shaqada culus | 1 qaybood | |
| 22 | Barnaamijka cabbiraadda booska ee dhinac saddexaad | 1 qaybood, Falanqaynta Goobta (Xulashada gorgortanka Nooca) | |
| 23 | 0.5" iftiin goobeed bartilmaameed ah | 1 gabal, oo leh xagal kala duwan: ±25° Miisaanka: 6g Khalad dhexda indhaha ah: ±3µm Baaxadda: 1.5µm Gacanka: 6.35mm ±0.002mm | |
| 24 | Saldhigga wareegga milicsiga | 0.5" oo ah meesha lagu xiro biinanka bartilmaameedka ah | 1 bartilmaameed, dhexroor 12.7mm ah, 10mm oo ka baxsan, dhexroor ul 8mm ah, bir aan miridh lahayn |
| 25 | 0.5" oo ah bartilmaameed toosan | 1 bartilmaameed, dhexroor 12.7mm ah, 10mm ka baxsan, bir aan miridh lahayn | |
| 26 | 0.5" geeska bartilmaameedka | 1 bartilmaameed, dhexroor 12.7mm ah, 10mm ka baxsan, bir aan miridh lahayn | |
| 27 | Aaladda kontoroolka fog ee bilaa-waayirka ah | 1 set, oo taageeraya xakamaynta fog ee helitaanka xogta qalabka, 2.4GHz | |
| 28 | Shahaadada halbeegga ugu weyn | 1 nuqul | |
Nagu Saabsan
Astaanta Warshadda
Maxaad U Doorataa
Su'aalaha Badiya La Weydiiyo
S1: Yaan nahay?
A1: MSK (Tianjin) Cutting Technology CO.Ltd oo la aasaasay 2015, ayaa si joogto ah u kortay waxayna ka gudubtay Rheinland ISO 9001
xaqiijin. Iyada oo la adeegsanayo xarumaha shiididda shan-dhidib ee sare ee Jarmalka SACCKE, xarunta kormeerka qalabka lix-dhidib ee Jarmalka ZOLLER, mashiinka PALMARY ee Taiwan iyo qalabka kale ee wax soo saarka ee caalamiga ah ee horumarsan, waxaan ka go'an nahay inaan soo saarno qalab CNC oo heer sare ah, xirfad leh oo hufan.
S2: Ma shirkad baad ka ganacsataa mise shirkad?
A2: Waxaan nahay warshadda qalabka carbide-ka.
S3: Ma u diri kartaa alaab shirkaddayada Gudbinta ee Shiinaha?
A3: Haa, haddii aad ku haysato shirkadda Forwarder ee Shiinaha, waan ku faraxsanahay inaan u dirno alaab isaga/iyada.
S4: Waa maxay shuruudaha lacag bixinta ee la aqbali karo?
A4: Caadiyan waxaan aqbalnaa T/T.
Q5: Ma aqbashaa amarrada OEM?
A5: Haa, OEM iyo habayn ayaa la heli karaa, waxaanan sidoo kale bixinnaa adeegga daabacaadda sumadda.
S6: Maxaad noo dooran lahayd?
A6:1) Xakamaynta qiimaha - iibsashada alaabada tayada sare leh qiimo ku habboon.
2) Jawaab degdeg ah - 48 saacadood gudahood, shaqaale xirfadlayaal ah ayaa ku siin doona qiimeyn waxayna wax ka qaban doonaan walaacyadaada.
3) Tayo Sare - Shirkaddu waxay had iyo jeer si daacad ah u caddaataa in alaabta ay bixiso ay yihiin 100% tayo sare leh.
4) Adeegga iibka kadib iyo hagitaan farsamo - Shirkaddu waxay bixisaa adeeg iibka kadib iyo hagitaan farsamo iyadoo loo eegayo shuruudaha iyo baahiyaha macaamiisha.
Noo soo dir fariintaada:
-
Mashiinka Qodista Radial-ka ee Tleeve ee caajiska ah
-
Daawaynta Baraha ee HRC55 CNC
-
Qaybaha Qalliinka ee HSS Toosan ee Shank-ka ah ee M2 ee Prec...
-
qalabka korontada jumlada ah ee dib loo buuxin karo ...
-
Adkeysiga qodista SP 5XD ee la saadaalin karo ayaa ka fiican
-
Dhammaystirka Chipbreaker Carbide VNMG160404 CNC La...
