Grinding Carbide Rods
| Grade | Content ofCobalt
Co % |
Grain Sizeμm | Densityg/cm3 | HardnessHRA | TRSN/mm2 |
| YG10X | 10 | 0.8 | 14.6 | 91.5 | 3800 |
| ZK30UF | 10 | 0.6 | 14.5 | 92 | 4200 |
| GU25UF | 10 | 0.4 | 14.3 | 92.5 | 4300 |
Recommended Usage
YG10X
Use widely, with good hot hardness. Suitable for milling and drilling general steel
under 45 HRC and Aluminum, etc at a low cutting speed. Recommend use this
grade to make the twist drills, end mills, etc.
ZK30UF
Suitable for milling and drilling general steel under HRC 55, cast iron, stainless
steel, aluminum alloy, etc. Recommend to make the drills, milling cutters, reamers
and taps.
GU25UF
Suitble for milling titanium alloy, hardened steel, refractory alloy under HRC 62. Recommend to make end mills with high cutting speed and reamer.
| Item no. | Diameter | Overall length | Item no. | Diameter | Overall length |
| MSKBAR001 | 2 | 100 | MSKBAR011 | 16 | 100 |
| MSKBAR002 | 3 | 100 | MSKBAR012 | 18 | 100 |
| MSKBAR003 | 4 | 100 | MSKBAR013 | 20 | 100 |
| MSKBAR004 | 5 | 100 | MSKBAR014 | 6 | 150 |
| MSKBAR005 | 6 | 100 | MSKBAR015 | 8 | 150 |
| MSKBAR006 | 7 | 100 | MSKBAR016 | 10 | 150 |
| MSKBAR007 | 8 | 100 | MSKBAR017 | 12 | 150 |
| MSKBAR008 | 9 | 100 | MSKBAR018 | 14 | 150 |
| MSKBAR009 | 10 | 100 | MSKBAR019 | 16 | 150 |
| MSKBAR010 | 12 | 100 | MSKBAR020 | 18 | 150 |
Advantages:
1.Using over 99.95% high purity tungsten carbide powder, it has a better strength and hardness combined with a longer service life
than the normal one.
2. Using ultrafine grain size of tungsten carbide powder to produce,Hardness can reach to HRA93.6, Bending strength can reach to
4000N/mm²
3.Tolerance can reach to ±0.001mm, straightness can reach to ±0.02mmWhy choose us:
1.High Quality carbide Rods ISO9001 certified
2.Automatic pressing, HIP sintering technology
3.Good abrasion resistance and high hardness
4.Prompt aftersales service within 24 hours
5.OEM and customzied order accepted
6.Diameter from 3-25mm, overal length 20mm to 330mm
7.Suitable for making drill bits,end mills,reamers and PCB tools etc.
1.Using over 99.95% high purity tungsten carbide powder, it has a better strength and hardness combined with a longer service life
than the normal one.
2. Using ultrafine grain size of tungsten carbide powder to produce,Hardness can reach to HRA93.6, Bending strength can reach to
4000N/mm²
3.Tolerance can reach to ±0.001mm, straightness can reach to ±0.02mmWhy choose us:
1.High Quality carbide Rods ISO9001 certified
2.Automatic pressing, HIP sintering technology
3.Good abrasion resistance and high hardness
4.Prompt aftersales service within 24 hours
5.OEM and customzied order accepted
6.Diameter from 3-25mm, overal length 20mm to 330mm
7.Suitable for making drill bits,end mills,reamers and PCB tools etc.
Send your message to us:
Write your message here and send it to us
