Lilọ Carbide Rods
| Ipele | Akoonu tiKobalti Co% | Iwọn ọkàμm | iwuwog/cm3 | LileHRA | TRSN/mm2 |
| YG10X | 10 | 0.8 | 14.6 | 91.5 | 3800 |
| ZK30UF | 10 | 0.6 | 14.5 | 92 | 4200 |
| GU25UF | 10 | 0.4 | 14.3 | 92.5 | 4300 |
Niyanju Lilo
YG10X
Lo jakejado, pẹlu líle gbigbona to dara.Dara fun milling ati liluho gbogbo, irin
labẹ 45 HRC ati Aluminiomu, ati bẹbẹ lọ ni iyara gige kekere.Ṣeduro lilo eyi
ite lati ṣe awọn adaṣe lilọ, awọn ọlọ ipari, ati bẹbẹ lọ.
ZK30UF
Dara fun milling ati liluho irin gbogbogbo labẹ HRC 55, irin simẹnti, alagbara
irin, aluminiomu alloy, bbl Ṣeduro lati ṣe awọn drills, milling cutters, reamers
ati taps.
GU25UF
Dara fun milling titanium alloy, irin lile, alloy refractory labẹ HRC 62. Ṣeduro lati ṣe awọn ọlọ ipari pẹlu iyara gige giga ati reamer.
| Nkan no. | Iwọn opin | Lapapọ ipari | Nkan no. | Iwọn opin | Lapapọ ipari |
| MSKBAR001 | 2 | 100 | MSKBAR011 | 16 | 100 |
| MSKBAR002 | 3 | 100 | MSKBAR012 | 18 | 100 |
| MSKBAR003 | 4 | 100 | MSKBAR013 | 20 | 100 |
| MSKBAR004 | 5 | 100 | MSKBAR014 | 6 | 150 |
| MSKBAR005 | 6 | 100 | MSKBAR015 | 8 | 150 |
| MSKBAR006 | 7 | 100 | MSKBAR016 | 10 | 150 |
| MSKBAR007 | 8 | 100 | MSKBAR017 | 12 | 150 |
| MSKBAR008 | 9 | 100 | MSKBAR018 | 14 | 150 |
| MSKBAR009 | 10 | 100 | MSKBAR019 | 16 | 150 |
| MSKBAR010 | 12 | 100 | MSKBAR020 | 18 | 150 |
Awọn anfani:
1.Using over 99.95% giga tungsten carbide powder, o ni agbara ti o dara julọ ati lile ni idapo pẹlu igbesi aye iṣẹ to gun.
ju deede lọ.
2. Lilo iwọn ọkà ultrafine ti tungsten carbide lulú lati gbejade, Lile le de ọdọ HRA93.6, Agbara atunse le de ọdọ si
4000N/mm²
3.Tolerance le de ọdọ ± 0.001mm, straightness le de ọdọ si ± 0.02mmKini idi ti o yan wa:
1.High Quality carbide Rods ISO9001 ifọwọsi
2.Automatic titẹ, imọ-ẹrọ sintering HIP
3.Good abrasion resistance ati giga lile
4.Prompt aftersales iṣẹ laarin 24 wakati
5.OEM ati aṣẹ adani ti gba
6.Diameter lati 3-25mm, ipari ipari 20mm si 330mm
7.Suitable fun ṣiṣe liluho bit, opin Mills, reamers ati PCB irinṣẹ ati be be lo.
1.Using over 99.95% giga tungsten carbide powder, o ni agbara ti o dara julọ ati lile ni idapo pẹlu igbesi aye iṣẹ to gun.
ju deede lọ.
2. Lilo iwọn ọkà ultrafine ti tungsten carbide lulú lati gbejade, Lile le de ọdọ HRA93.6, Agbara atunse le de ọdọ si
4000N/mm²
3.Tolerance le de ọdọ ± 0.001mm, straightness le de ọdọ si ± 0.02mmKini idi ti o yan wa:
1.High Quality carbide Rods ISO9001 ifọwọsi
2.Automatic titẹ, imọ-ẹrọ sintering HIP
3.Good abrasion resistance ati giga lile
4.Prompt aftersales iṣẹ laarin 24 wakati
5.OEM ati aṣẹ adani ti gba
6.Diameter lati 3-25mm, ipari ipari 20mm si 330mm
7.Suitable fun ṣiṣe liluho bit, opin Mills, reamers ati PCB irinṣẹ ati be be lo.
Fi ifiranṣẹ rẹ ranṣẹ si wa:
Kọ ifiranṣẹ rẹ nibi ki o si fi si wa
