1-13mm 1-16mm 3-16mm B16 Keyless Drill Chuck For Drill Press


  • Product name: keyless drill chuck
  • Product material: 40Cr high carbon steel
  • Product Type: Tapered Hole, Tapped Hole, Metric, Imperial, Light Duty, Heavy Duty
  • Product Detail

    Product Tags

    15015578900_468745175

    PRODUCT DESCRIPTION

    Light duty drill chucks are suitable for small bench drills or hand drills, heavy duty drill chucks are suitable for drilling presses

     

    RECOMMENDATION FOR USE IN WORKSHOPS

    Instructions for use:

    1. The self-tightening drill chuck does not need to be tightened with a wrench. After the cutting tool is installed, the drill chuck jacket is tightened by hand, and the clamping force increases with the increase of cutting force.

    2. The drill chuck cannot be used when the machine tool is reversed, and it loses its self-tightening effect when it is reversed.

    3. When installing the drill chuck, wipe the taper hole and the taper shank of the machine tool (or electric drill) clean, align the cone with the center of the taper shank and tap the front face of the drill body with a hand or a wooden hammer until it is installed properly.

    Brand MSK Material 40Cr
    Product Name Drill Chuck MOQ 10PCS

    DETAILED PICTURE

    15833768486_468745175
    15770353031_468745175
    sizwe
    photobank-31
    photobank-21

  • Previous:
  • Next:

  • Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us