HRC55 Solid Carbide Twist Drills (3D)
Material: Tungsten Steel
Coating: TiSiN , with very high surface hardness and good wear resistance.
Tolerance of end mill diameter every size: 0.000 ～ 0.050
| Item NO. | Diameter D | Flute Length | Overall Length | Shank Diameter | Flutes |
| MSKEM2FG001 | 1 | 8 | 38 | 3 | 2 |
| MSKEM2FG002 | 1.1 | 12 | 42 | 3 | 2 |
| MSKEM2FG003 | 1.2 | 12 | 42 | 3 | 2 |
| MSKEM2FG004 | 1.3 | 12 | 42 | 3 | 2 |
| MSKEM2FG005 | 1.4 | 12 | 42 | 3 | 2 |
| MSKEM2FG006 | 1.5 | 12 | 42 | 3 | 2 |
| MSKEM2FG007 | 1.6 | 12 | 42 | 3 | 2 |
| MSKEM2FG008 | 1.7 | 12 | 42 | 3 | 2 |
| MSKEM2FG009 | 1.8 | 12 | 42 | 3 | 2 |
| MSKEM2FG010 | 1.9 | 12 | 42 | 3 | 2 |
| MSKEM2FG011 | 2 | 12 | 42 | 3 | 2 |
| MSKEM2FG012 | 2.1 | 14 | 50 | 3 | 2 |
| MSKEM2FG013 | 2.2 | 14 | 50 | 3 | 2 |
| MSKEM2FG014 | 2.3 | 14 | 50 | 3 | 2 |
| MSKEM2FG015 | 2.4 | 14 | 50 | 3 | 2 |
| MSKEM2FG016 | 2.5 | 14 | 50 | 3 | 2 |
| MSKEM2FG017 | 2.6 | 14 | 50 | 3 | 2 |
| MSKEM2FG018 | 2.7 | 14 | 50 | 3 | 2 |
| MSKEM2FG019 | 2.8 | 14 | 50 | 3 | 2 |
| MSKEM2FG020 | 2.9 | 14 | 50 | 3 | 2 |
| MSKEM2FG021 | 3 | 14 | 50 | 3 | 2 |
| MSKEM2FG022 | 3.1 | 20 | 60 | 4 | 2 |
| MSKEM2FG023 | 3.2 | 20 | 60 | 4 | 2 |
| MSKEM2FG024 | 3.3 | 20 | 60 | 4 | 2 |
| MSKEM2FG025 | 3.4 | 20 | 60 | 4 | 2 |
| MSKEM2FG026 | 3.5 | 20 | 60 | 4 | 2 |
| MSKEM2FG027 | 3.6 | 20 | 60 | 4 | 2 |
| MSKEM2FG028 | 3.7 | 20 | 60 | 4 | 2 |
| MSKEM2FG029 | 3.8 | 20 | 60 | 4 | 2 |
| MSKEM2FG030 | 3.9 | 20 | 60 | 4 | 2 |
| MSKEM2FG031 | 4 | 20 | 60 | 4 | 2 |
| MSKEM2FG032 | 4.1 | 24 | 62 | 5 | 2 |
| MSKEM2FG033 | 4.2 | 24 | 62 | 5 | 2 |
| MSKEM2FG034 | 4.3 | 24 | 62 | 5 | 2 |
| MSKEM2FG035 | 4.4 | 24 | 62 | 5 | 2 |
| MSKEM2FG036 | 4.5 | 24 | 62 | 5 | 2 |
| MSKEM2FG037 | 4.6 | 24 | 62 | 5 | 2 |
| MSKEM2FG038 | 4.7 | 24 | 62 | 5 | 2 |
| MSKEM2FG039 | 4.8 | 24 | 62 | 5 | 2 |
| MSKEM2FG040 | 4.9 | 24 | 62 | 5 | 2 |
| MSKEM2FG041 | 5 | 24 | 62 | 5 | 2 |
| MSKEM2FG042 | 5.1 | 28 | 66 | 6 | 2 |
| MSKEM2FG043 | 5.2 | 28 | 66 | 6 | 2 |
| MSKEM2FG044 | 5.3 | 28 | 66 | 6 | 2 |
| MSKEM2FG045 | 5.4 | 28 | 66 | 6 | 2 |
| MSKEM2FG046 | 5.5 | 28 | 66 | 6 | 2 |
| MSKEM2FG047 | 5.6 | 28 | 66 | 6 | 2 |
| MSKEM2FG048 | 5.7 | 28 | 66 | 6 | 2 |
| MSKEM2FG049 | 5.8 | 28 | 66 | 6 | 2 |
| MSKEM2FG050 | 5.9 | 28 | 66 | 6 | 2 |
| MSKEM2FG051 | 6 | 28 | 66 | 6 | 2 |
| MSKEM2FG052 | 6.1 | 34 | 74 | 7 | 2 |
| MSKEM2FG053 | 6.2 | 34 | 74 | 7 | 2 |
| MSKEM2FG054 | 6.3 | 34 | 74 | 7 | 2 |
| MSKEM2FG055 | 6.4 | 34 | 74 | 7 | 2 |
| MSKEM2FG056 | 6.5 | 34 | 74 | 7 | 2 |
| MSKEM2FG057 | 6.6 | 34 | 74 | 7 | 2 |
| MSKEM2FG058 | 6.7 | 34 | 74 | 7 | 2 |
| MSKEM2FG059 | 6.8 | 34 | 74 | 7 | 2 |
| MSKEM2FG060 | 6.9 | 34 | 74 | 7 | 2 |
| MSKEM2FG061 | 7 | 34 | 74 | 7 | 2 |
| Workpiece Material | ||||||
| Carbon Steel | Alloy Steel | Cast Iron | Aluminium Alloy | Copper Alloy | Stainless Steel | Hardened Steel |
| Suitable | Suitable | Suitable | Suitable | |||
Suitable for drilling cast iron of automobile industry and other industries.
Wave formed cutting lips provides lowered machining torque. For margin design, improves hole wall quality and accuracy.
Increased drills point strength through optimized chisel edge.
Send your message to us:
Write your message here and send it to us
