3mm Shank Carbide Tip Rotary Burr Cut Carving Bit
PRODUCT DESCRIPTION
Tungsten steel grinding head: long life, high hardness, anti-corrosion
No dust pollution during milling, stable, reliable and high efficiency
BE CAREFUL
Operation Notes:
1. Mainly used on pneumatic or electric drive tools
2. The speed is generally 6000-50000 rpm
3. Use the tool to tighten the clamping, and the cutting method is preferably up-cut to avoid reciprocating cutting
4. In order to prevent cutting dispersion during operation, please use protective glasses
Uses: Carbide rotary files are widely used, and are used in the processing and manufacturing of abrasive tools. Machining of chamfering, rounding and grooves for mechanical odd jobs, cleaning of flash edges of castings, forgings, and welding parts; finishing of pipes, impeller runners, and arts and crafts carving of metal and non-metallic materials (bone, jade, stone) .
| D1 | D2 | L1 | |
| 1#A单槽SINGLE FLUTE | 6mm | 3mm | 13mm |
| 2#C单槽SINGLE FLUTE | 6mm | 3mm | 13mm |
| 3#D单槽SINGLE FLUTE | 6mm | 3mm | 5mm |
| 4#E单槽SINGLE FLUTE | 6mm | 3mm | 10mm |
| 5#F单槽SINGLE FLUTE | 6mm | 3mm | 13mm |
| 6#G单槽SINGLE FLUTE | 6mm | 3mm | 13mm |
| 7#H单槽SINGLE FLUTE | 6mm | 3mm | 13mm |
| 8#L单槽SINGLE FLUTE | 6mm | 3mm | 13mm |
| 9#M单槽SINGLE FLUTE | 6mm | 3mm | 13mm |
| 10#N单槽SINGLE FLUTE | 6mm | 3mm | 7mm |
| 10PCS SET | 6mm | 3mm | / |
| 1#A双槽DOUBLE FLUTE | 6mm | 3mm | 13mm |
| 2#C双槽DOUBLE FLUTE | 6mm | 3mm | 13mm |
| 3#D双槽DOUBLE FLUTE | 6mm | 3mm | 5mm |
| 4#E双槽DOUBLE FLUTE | 6mm | 3mm | 10mm |
| 5#F双槽DOUBLE FLUTE | 6mm | 3mm | 13mm |
| 6#G双槽DOUBLE FLUTE | 6mm | 3mm | 13mm |
| 7#H双槽DOUBLE FLUTE | 6mm | 3mm | 13mm |
| 8#L双槽DOUBLE FLUTE | 6mm | 3mm | 13mm |
| 9#M双槽DOUBLE FLUTE | 6mm | 3mm | 13mm |
| 10#N双槽DOUBLE FLUTE | 6mm | 3mm | 7mm |
| 10PCS SET | 6mm | 3mm | / |
FAQ
Q: Can this be used for wood hole grinding?
A: Double slot is suitable for soft materials such as wood, plastic, aluminum, etc.;
Single groove is suitable for hard materials such as iron and cast iron
Q: Can stainless steel be used?
A: Yes, but relatively less wear-resistant
Q: Can the hand drill and bench drill be installed?
A: It is not recommended for hand electric drills and bench drills, but professional electric grinders are recommended.
Q: Is 2.4mm thick stainless steel hard to grind?
A: It can be sharpened, and it takes time and patience to grind.
Q: What is the difference between single-slot and double-slot use?
Single groove is suitable for hard materials, iron, steel, copper and other hard materials, surface and inner cutting and repairing
Double groove is suitable for surface and inner cutting and trimming of softer materials, wood, aluminum, plastic and other materials
