Yintoni End Mill?

Eyona nto iphambili yokusika i-mill end yi-cylindrical surface, kwaye i-cut cut on the end surface is the second cutting edge.Indawo yokusila ngaphandle komphetho oseziko ayikwazi ukwenza intshukumo yokutya ecaleni kwe-axial ye-milling cutter.Ngokomgangatho wesizwe, ububanzi bombhobho wokuphela ngu-2-50 mm, obunokwahlulwa lube ziindidi ezimbini: amazinyo arhabaxa kunye namazinyo amahle.Ububanzi be-2-20 luluhlu lwe-shank echanekileyo, kwaye ububanzi be-14-50 luhlu lwe-tapered shank.
Izisila ezisemgangathweni ziyafumaneka ngamazinyo arhabaxa kunye namahle.Inani lamazinyo e-coarse-tooth end mill yi-3 ukuya ku-4, kunye ne-helix angle β inkulu;inani lamazinyo okuphela kwezinyo elicolekileyo yi-5 ukuya ku-8, kwaye i-engile ye-helix β incinci.Izinto eziphathekayo zecandelo lokusika yintsimbi ephezulu, kwaye i-shank yintsimbi ye-45.

Zininzi iimilo zokusika ii-milling cutters, ezisetyenziselwa oomatshini bokungqusha abaqhelekileyo kunye noomatshini bokungqusha be-CNC ukuze baqhube iigrooves kunye neecontours ezithe tye, kunye nokusetyenzwa kwemingxuma, ii-cores, kunye neemilo zomphezulu / iicontours kumaziko omatshini okungqusha kunye nadikayo.
Abasiki bokugaya bahlulahlulwe ngokubanzi ngokwe:
1. Umsiki wokusila osicaba, ukugaya okulungileyo okanye ukugaya, i-grooves yokugaya, ukususa inani elikhulu lezinto ezingenanto, ukugaya okulungileyo kweendiza ezincinci ezithe tye okanye iikhonto;

2. Umsiki wempumlo wokusila ibholaukugqiba ukugqiba kunye nokugqiba ukucola imiphezulu egobileyo;abasiki abancinci banokugqiba ukuguba iichamfers ezincinci kwindawo engumnqantsa / iindonga ezithe tye.

3. Umsiki wokusila osicaba unawoehlekisayo, enokuthi isetyenziselwe ukungqusha ngokurhabaxa ukususa isixa esikhulu sezinto ezingenanto, kwaye inokucolisisa iichamfers ezincinci kwimiphezulu ethe tyaba ethe tyaba (enxulumene nemigangatho engumnqantsa).

4. Ukwenza abasiki bokugaya, kubandakanywa abasiki be-chamfering, abasiki be-T-shaped milling okanye abasiki begubu, abasiki bamazinyo, kunye nabasiki bangaphakathi be-R.

5. I-Chamfering cutter, imilo ye-chamfering cutter iyafana naleyo ye-chamfering, kwaye yahlulahlulwe yaba ngabasiki bokungqusha ukuze bajikeleze kunye ne-chamfering.

6. Umsiki omile okwe-T, i-groove emile okwe-T;

7. Ukusika amazinyo, ukukhupha iimilo ezahlukeneyo zamazinyo, njengeegiya.

8. Umsiki wesikhumba orhabaxa, i-cutter yokugaya i-rough cutter eyenzelwe ukusika i-aluminium kunye ne-alloys zethusi, ezinokucutshungulwa ngokukhawuleza.

Kukho izinto ezimbini eziqhelekileyo zokusika abasiki bemilling: intsimbi enesantya esiphezulu kunye ne-cemented carbide.Xa kuthelekiswa neyokuqala, le yokugqibela inobunzima obuphezulu kunye namandla anamandla okusika, anokunyusa isantya kunye nesantya sokutya, ukuphucula imveliso, ukwenza i-cutter ingabonakali, kwaye isebenze izinto ezinzima kumatshini ezifana nensimbi engenasici / i-titanium alloy, kodwa ixabiso liphezulu, kwaye amandla okusika atshintsha ngokukhawuleza.Kwimeko yokulula ukuqhekeza umsiki.