Cabbirka Xoogga ee Xididdada CNC | BT30/40/50 & HSK32–100 Mitirka Xawaaraha

Moodooyinka la heli karo: BT30, BT40, BT50, HSK32A, HSK40A, HSK50A, HSK63A, HSK80A, HSK100A, SK40, SK50, CAT40, CAT50, ISO20, ISO25, BBT40, BBT50

Saxnaanta (Heerka):0.003-0.005

Qalabka:Birta 20CrMnTi

Noo soo dir emayl

Faahfaahinta Badeecada

Calaamadaha Alaabta

Dulmar Guud oo ku saabsan Badeecada

Cabbirka Xoogga ee Qalabka Drawbar-ka ee CNC waa mitir xiisadeed oo xirfadle ah oo loogu talagalay cabbir sax ah oo ku saabsan xoogga isku-xidhka dunta (xoogga jiidista dunta) ee xarumaha mashiinka CNC, mashiinnada wax lagu shiido, iyo nidaamyada kale ee dunta warshadaha. Waxay daboolaysaa isku-xidhka dunta ee ugu badan, oo ay ku jiraan BT30, BT40, BT50 iyo HSK32, HSK40, HSK50, HSK63, HSK80, HSK100, iyo sidoo kale taxanaha SK, CAT, ISO, iyo BBT.

Tijaabinta xoogga jiidista joogtada ah waxay ka hortagtaa soo bixidda qalabka, waxay yareysaa qashinka shaqada, waxay dheereysaa cimriga wareegga, waxayna hubisaa saxnaanta mashiinka oo joogto ah. Cabbirkan waxaa si weyn u isticmaala kooxaha dayactirka qalabka mashiinka, dib u dhiska wareegga, iyo waaxaha xakamaynta tayada.

Tilmaamaha Farsamada

Halbeegga	Qiimaha / Sharaxaadda
Saxnaanta cabbirka	Darajada 0.003 – 0.005
Qalabka jirka	Birta daawaha ah ee 20CrMnTi, oo la damiyay oo la adkeeyay
Iska caabbinta daxalka	Sare (daaweyn ka-hortagga miridhku)
Iska caabinta saameynta	Aad u fiican (qaab-dhismeed adag)
Cabbirka cadaadiska	Jarmalka WIKA cabbirka cadaadiska saliidda
Beddelka cutubka cadaadiska	1 KG/cm² oo cabbir ah = 10 KG oo ah xoogga dhabta ah ee jiidista
Joogtada ah ee aagga gudaha	10.00875 (cadaadis cabbir ×10 = xoog jiidis ah oo ku jira KG)
Nooca saliidda haydarooliga	R68 (dib u soo celinta rarka hore)

Astaamaha Muhiimka ah

1. Cabbirka Saxnaanta Sare

Cabbirku wuxuu bixiyaa saxnaan la soo celin karo oo ku jirta heerka 0.003–0.005, taasoo u oggolaanaysa hawl wadeennada inay ogaadaan burburka xoogga isku dhejinta ka hor inta aysan saameyn ku yeelan tayada wax soo saarka.

2. Dhismaha Birta Daawaha ee Waarta

Waxaa laga sameeyay 20CrMnTi - bir aan daawad lahayn oo loo yaqaan adkeysigeeda aadka u wanaagsan, iska caabbinta saameynta, iyo iska caabbinta xirashada. Ka dib marka la damiyo oo la kululeeyo, jirku wuxuu ilaaliyaa dhalaal sare iyo cimri dheer xitaa xaaladaha dabaqa dukaanka.

3. Akhris Fudud & Beddelid

Looma baahna qalab elektaroonik ah oo adag. Cabbirka cadaadiska analogga ah wuxuu muujinayaa qiimaha cadaadiska tooska ah. Ku dhufo akhrinta 10 si aad u hesho xoogga jiidista dhabta ah ee kiilogaraamyada.
Tusaale: Cabbirku wuxuu muujinayaa 25 KG → xoogga dhabta ah ee jiidista = 250 KG.

4. Naqshadeynta Hore ee Culayska La Soo Celin Karo

Si ka duwan tijaabiyayaasha la tuuri karo, cabirkani wuxuu u oggolaanayaa dib u soo celinta goobta ee rarka hore ee gudaha. Kaliya ku dar saliidda haydarooliga R68 oo hagaaji usha A - looma baahna qalab gaar ah ama adeeg warshadeed.

5. Iswaafajin Ballaaran

Jir cabbir ah oo leh adapters la beddeli karo ayaa daboolaya BT, HSK, SK, CAT, ISO, iyo BBT spindle-ka cabbirka 20 ilaa 100. Ku habboon aqoon-is-weydaarsiyada leh noocyada mashiinnada isku dhafan.

6. La qaadi karo & Diyaar u ah in la isticmaalo

Cabbir yar, looma baahna awood dibadeed. Waxay la socotaa baakad la safeeyey iyo bandhig sawir dhab ah oo dhinacyo badan leh si loo fududeeyo aqoonsiga.

Faa'iidooyinka Faahfaahinta

Soo-saarista Saxda ah, Tayada Sare

Bir Tayo Sare leh

Birta 20CrMnTi

Laga sameeyay 20 bir oo daawaha ah,

Saxnaanta la soo saaray, waxqabadka xasilloon,

Si fudud uma milmaan, habab badan oo wax soo saar iyo kormeer ah

Tilmaamaha Badeecada

Adkaysan oo lagu damiyo,

Iska caabin xoog leh oo shoog ah,

Si fudud uma miridhsana,

Iska caabbinta saameynta,

Cimri dheer oo adeeg ah,

Dhalaal sare

Baakad La Sifeeyay

Bandhig sawir dhab ah oo xaglo badan leh

Xoogga Qabsashada Spindle-ka ee Bt30 Bt40 Bt50

Taxaddarrada Isticmaalka Cabbirka Tamarta

A: Kahor intaadan isticmaalin qalabka cabbira cadaadiska, hubi in rarka gudaha uu yahay mid caadi ah.

1. Arag ahaan u hubi haddii tilmaamuhu uusan eber ku soo noqon; weli waxaa jira wax horay loo sii raray.

2. Gacanta ku hubi haddii cabbirka cadaadiska torsion-ka iyo jirku ay wareegayaan.

3. Wareegid la'aantu waxay muujinaysaa in weli la sii raro; wareegiddu waxay muujinaysaa in aan la sii rarin.

4. Naqshadaynta cadaadiska cabbirka jiidista: 1KG/CM = 10KG = 100N

5. Isticmaal cabirka cadaadiska saliidda ee Jarmalka ee WIKA.

B: Habka dib loogu soo celinayo rarka hore ee cabbirka jiidista

1. Ka saar fiilada calaamadda B.

2. Usha tilmaame A-ga fur hal wareeg.

3. Usha A gudaha u riix (si loo yareeyo heerka saliidda ee qolka saliidda).

4. Ku buuxi dekedda B saliid haydarooliga R68, ka dibna xir fiilada tilmaameha.

5. Adkee usha A; tilmaamaha cabbirka cadaadiska C ayaa kor u dhaqaaqi doona.

6. Kadib... Fur daboolka si aad u ogolaato in saliid gudaha ah ay si yar u daadato, adigoo hagaajinaya cadaadiska gudaha ilaa inta cadaadiska uu hoos ugu dhacayo inta u dhaxaysa 10KG ~ 30KG.

C: Habka Akhriska Cabbirka Taagista

1. Baaxadda gudaha ee cabbirkan jiidista waa 10.00875. Sidaa darteed, ku dhufashada xogta cadaadiska ee tilmaame tilmaame 10 waxay siinaysaa xoogga jiidista saxda ah. Marka loo eego cutubka Newton ee lagu soo bandhigay cabbirka jiidista elektaroonigga ah: 1 Newton = 9.8KG.

2. Cutubka cadaadiska ee lagu soo bandhigay badeecadan waa 1KG = 10KG xoog jiidis ah.

Lambarka Taxanaha	Qeexitaannada Badeecada	Saxnaanta (Darajada)
1	BT30	0.003-0.005
2	BT40	0.003-0.005
3	BT50	0.003-0.005
4	HSK32A	0.003-0.005
5	HSK40A	0.003-0.005
6	HSK50A	0.003-0.005
7	HSK63A	0.003-0.005
8	HSK80A	0.003-0.005
9	HSK100A	0.003-0.005
10	SK40	0.003-0.005
11	SK50	0.003-0.005
12	CAT40	0.003-0.005
13	CAT50	0.003-0.005
14	ISO20	0.003-0.005
15	ISO25	0.003-0.005
16	BBT40	0.003-0.005
17	BBT50	0.003-0.005

Tijaabada xoogga jiidista isteerinka HSK ee la qaadi karo

Codsiyada

Dayactirka joogtada ah ee wareegga ee aqoon-is-weydaarsiyada mashiinka CNC

Habaynta xoogga jiidista ka dib dib u dhiska ama dayactirka dunmiiqa

Qalabka soo saarista ama dhammaystirka dusha sare oo liita

Kormeerka soo socda ee qalabka cusub ama kuwa la isticmaalay

Hubinta tayada dhisayaasha qalabka mashiinka iyo kuwa iibiya

Maxaad u Dooranaysaa Cabbirka Xoogga Jiidista Spindle-ka?

Walaaca Macaamiisha Xalkeenna

Akhrinta aan sax ahayn: Heerka saxda ah 0.003–0.005, warshadda ayaa la hagaajiyay

Cimriga wax soo saarka gaaban 20CrMnTi bir ah, la damiyay, ka hortagga daxalka

Way adag tahay in la ilaaliyo. Culays hore loo soo celin karo + dib u buuxinta saliidda R68

Waafaqid xaddidan oo ku saabsan dunduleelka 17+ nooc oo la heli karo oo ay ku jiraan BT iyo HSK

Ma jiro taageero OEM Adeegga astaan gaar ah iyo baakadaha

La xiriir & Taageero

Dalabyada badan, summadaynta OEM, ama la-tashiga farsamada, fadlan isticmaal foomka xiriirka ama si toos ah noogu soo dir emayl.

Nagu Saabsan

Shirkadda Ganacsiga Caalamiga ah ee MSK (Tianjin) Ltd oo la aasaasay 2015, ayaa si joogto ah u kortay oo u gudubtay heerkii ugu sarreeyay.Xaqiijinta Rheinland ISO 9001Iyada oo la adeegsanayo xarumaha shiididda shan-dhidib ee sare ee Jarmalka SACCKE, xarunta kormeerka qalabka lix-dhidib ee Jarmalka ZOLLER, mashiinka Taiwan PALMARY iyo qalabka kale ee wax soo saarka ee caalamiga ah ee horumarsan, waxaan ka go'an nahay inaan soo saarnoheer sare ah, xirfad leh oo hufanQalabka CNC. Takhasuskayagu waa naqshadeynta iyo soo saarista dhammaan noocyada qalabka jarista carbide-ka adag:Mashiinka wax lagu qodo, qodayaasha, makiinadaha wax lagu qodo, tuubooyinka iyo qalabka gaarka ah.Falsafadda ganacsigeennu waa inaan macaamiisheenna siino xalal dhammaystiran oo hagaajiya hawlaha mashiinka, kordhiya wax soo saarka, iyo yareynta kharashyada.Adeeg + Tayada + WaxqabadkaKooxdayada la-talinta ayaa sidoo kale bixisaaqoonta wax soo saarka, oo leh xalal jireed iyo dhijitaal ah oo kala duwan si ay macaamiisheennu si ammaan ah ugu maraan mustaqbalka warshadaha 4.0. Wixii macluumaad qoto dheer oo ku saabsan qayb kasta oo gaar ah oo shirkaddayada ah, fadlansahamin boggayaga oristicmaal qaybta nala soo xiriirsi aan si toos ah ula xiriirno kooxdeena.

Su'aalaha Badiya La Weydiiyo

S1: Yaan nahay?

A1: MSK (Tianjin) Cutting Technology Co., Ltd. oo la aasaasay 2015, waa soo saare xirfadle ah oo ka shaqeeya qalabka carbide-ka ee waxqabadka sare leh. Waxaan shahaado ka haysannaa ISO 9001 Rheinland waxaana isticmaalnaa qalab caalami ah oo horumarsan, oo ay ku jiraan xarumaha shiididda shan-axis ee Jarmalka SACCKE, nidaamyada kormeerka qalabka lix-axis ee Jarmalka ZOLLER, iyo mashiinnada saxda ah ee Taiwan PALMARY.

S2: Ma shirkad ganacsi baad tahay mise shirkad soo saare?

A2: Waxaan nahay warshad toos ah oo ku takhasustay qalabka jarista carbide-ka.

S3: Ma u diri kartaa badeecadaha shirkaddayada rarista xamuulka ee Shiinaha?

A3: Haa, runtii. Haddii aad haysato qof kuu soo gudbinaya Shiinaha, si farxad leh ayaan u diyaarin doonnaa gaarsiinta.

S4: Waa maxay shuruudaha lacag bixinta ee aad aqbashay?

A4: Caadiyan waan aqbalnaa T/T (wareejinta bangiga). Shuruudaha kale waxaa laga wada hadli karaa iyadoo lagu saleynayo mugga dalabka iyo taariikhda iskaashiga.

Q5: Ma aqbashaa amarrada OEM?

A5: Haa. Waxaan soo dhaweyneynaa OEM iyo dalabaadka gaarka ah. Intaa waxaa dheer, waxaan bixinaa adeegyo daabacaad summadeed si loo daboolo baahiyahaaga summadeed.

S6: Maxaad noo dooran lahayd?

A6:

Xakamaynta kharashka - Waxaad heleysaa alaab tayo sare leh oo qiimo tartan ah leh.

Jawaab degdeg ah - Kooxdayada xirfadlayaasha ah waxay bixiyaan xigashooyin waxayna ka jawaabaan su'aalahaaga 48 saacadood gudahood.

Tayo sare - Waxaan ka go'an nahay inaan 100% gaarsiino badeecooyin tayo sare leh, oo ay taageerayaan daacadnimadeenna.

Taageerada iibka kadib iyo hagitaan farsamo - Waxaan bixinaa adeeg iib kadib ah oo loogu talagalay iyo caawimaad farsamo oo ku saleysan baahiyahaaga gaarka ah.

Kii hore: Afeeyaha Qalabka Qalliinka ee La Qaadan Karo φ3–13mm | 120W 4400RPM ee Qalabka Shiidiyaha ee HSS & Carbide Bits

Xiga: Afeeyaha Quudinta ee la Qaadan Karo ee Z13D – φ3-13mm HSS/Carbide Shiidiyaha oo leh 120W Motor