Super Purchasing for Single Flute End Mill - HRC55 No Coating Carbide 3 Flutes Roughing End Mills – MSK
Super Purchasing for Single Flute End Mill - HRC55 No Coating Carbide 3 Flutes Roughing End Mills – MSK Detail:
The roughing end mills have scallops on the outside diameter which causes the metal chips to break into smaller segments. This results in lower cutting pressures at a a given radial depth of cut.
Feature：
Coating: TiSiN, with very high surface hardness and good wear resistance, AlTiN, AlTiSiN is also avaiable
Product Design: Sharp wave and 35 helix angle design improve the chip removal capacity,widely used in slot, profile, rough.
Instructions for use
1. Before using this tool, please measure the tool deflection. If the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.
2. The shorter the length of the tool extension from the chuck, the better. If the extension of the tool is longer, please adjust the speed, in/out speed or cutting amount by yourself.
3. If abnormal vibration or sound occurs during cutting, please reduce the spindle speed and cutting amount until the situation improves.
4. The preferred method of cooling steel material is spray or air jet, so as to use cutters to achieve better results. It is recommended to use water-insoluble cutting fluid for stainless steel, titanium alloy or heat-resistant alloy.
5. The cutting method is affected by the workpiece, machine, and software. The above data is for reference only. After the cutting state is stable, the feed rate will be increased by 30%-50%.
| Brand | MSK | Material | Aluminum alloy, aluminum parts |
| Type | End Mill | Flute Diameter D(mm) |
6-20 |
| Head Diameter d（mm） | 6-20 | Length (ℓ)(mm) | 50-100 |
| Certification |
|
Package | Box |
Advantage:
| Flute Diameter(mm) | Flute Length(mm) | Head Diameter(mm) | Length(mm) | Flute |
| 4 | 10 | 4 | 50 | 3/4 |
| 6 | 16 | 6 | 50 | 3/4 |
| 8 | 20 | 8 | 60 | 3/4 |
| 10 | 25 | 10 | 75 | 3/4 |
| 12 | 30 | 12 | 75 | 3/4 |
| 16 | 40 | 16 | 100 | 3/4 |
| 20 | 45 | 20 | 100 | 3/4 |
Use:
Widely used in many fields
Aviation Manufacturing
Machine Production
Car manufacturer
Mold making
Electrical Manufacturing
Lathe processing
Product detail pictures:
Related Product Guide:
Every single member from our large efficiency profits team values customers' requirements and organization communication for Super Purchasing for Single Flute End Mill - HRC55 No Coating Carbide 3 Flutes Roughing End Mills – MSK , The product will supply to all over the world, such as: Senegal, Adelaide, Bangalore, Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We're likely to be delighted to give you a quotation up on receipt of one's in depth specs.
By Albert from Ukraine - 2017.11.20 15:58
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Page from Australia - 2017.10.23 10:29
