HSSCO Metal Countersink Drill Bit
TLHALOSO EA SEHLAHISOA
Lisebelisoa tsa HSSCO Countersink drill bit li nepahetse bakeng sa tšebeliso ea mochine oa ho phunya kapa mochine o nkehang habonolo bakeng sa mesebetsi e meholo moo ho hlokahalang lesoba la countersunk.Re boloka boholo bo fapaneng bakeng sa ho sebelisoa mefuteng eohle e fapaneng ea thepa.
KHOTHATSO EA HO SEBELISA LITABA
| Brand | MSK | MOQ | 10pcs |
| Lebitso la Sehlahiswa | Lisebelisoa tsa Countersink Drill | Sephutheloana | Sephutheloana sa polasetiki |
| Lintho tse bonahalang | HSS M35 | Lenaka | 60/90/120 |
MOLEMO
Tšebeliso: E sebelisoa bakeng sa 60/90/120degree chamfering kapa lesoba le tepeletseng la lesoba le chitja la mosebetsi.
Likarolo: E ka qeta bokaholimo ba tapered ka nako e le 'ngoe,' me e loketse ts'ebetso e nyane ea ho itšeha.
Phapang: Phapang e ka sehloohong pakeng tsa moeli o le mong le oa makhabane a mararo ke hore mosebetsi oa ho sebetsa o nang le ts'ebetso e le 'ngoe o na le qetello e ntle,' me ts'ebetso ea mahlakoreng a mararo e na le katleho e phahameng le bophelo.
Bophara ba shank: 5mm bakeng sa shank ea 6, 6mm bakeng sa shank ea 8-10, 8mm bakeng sa shank ea 12, 10mm bakeng sa shank ea 16-25, le 12mm bakeng sa 30-60's shank.
| Boholo | E khothalelitsoe Hole Diamter | Boholo | E khothalelitsoe Hole Diamter |
| 6.3 limilimithara | 2.5-4 limilimithara | 25 limilimithara | 6-17 limilimithara |
| 8.3 limilimithara | 3-5 limilimithara | 30 limilimithara | 7-20 limilimithara |
| 10.4 limilimithara | 4-7 limilimithara | 35 limilimithara | 8-24 limilimithara |
| 12.4 limilimithara | 4-8 limilimithara | 40 limilimithara | 9-27 limilimithara |
| 14 limilimithara | 5-10mm | 45 limilimithara | 9-30 limilimithara |
| 16.5 limilimithara | 5-11 limilimithara | 50 limilimithara | 10-35 limilimithara |
| 18mm | 6-12 limilimithara | 60 limilimithara | 10-40 limilimithara |
| 20.5 limilimithara | 6-14 limilimithara |
Lisebelisoa tse tharo tsa chamfering: ho itšeha ka mahlakoreng a mararo ka nako e le 'ngoe, ho sebetsa hantle haholo, ho se sebetse ho feta
E loketse bakeng sa: chamfering le ho itšeha ka botebo ba lisebelisoa tse thata tse kang tšepe ea hlobo, tšepe e sa hloekang, liporo, joalo-joalo.
HA HO khothaletsoe: ho sebetsana le lisebelisoa tse bonolo le tse tšesaane, joalo ka koporo, aluminium, joalo-joalo, ha ho khothalletsoe ho sebelisa mochini oa letsoho.
Sesebelisoa sa chamfering se nang le moeli o le mong: chamfering e nang le ntlha e le 'ngoe e boreleli, phello e pota-potileng e ntle.
E loketse bakeng sa: ho sebetsana le lisebelisoa tse bonolo, lisebelisoa tse tšesaane, ts'ebetso ea deburring e bonolo, e loketseng basebelisi ba pele
HA e khothalletsoe: ts'ebeliso ea lebelo le phahameng, lebelo le ka bang 200 le loketseng
Single-edged e buelloa ho ba qalang
