Mashiinka qodista shucaaca ee Shaleefka caajiska ah
MACLUUMAADKA SOO SAARKA
| Nooca | Radial Drill Press |
| Summada | MSK |
| Awoodda Matoorka ugu weyn | 2.2 (kw) |
| Cabirka | 1800*800*2300(mm) |
| Tirada Faasas | Dhidib kali ah |
| Qodista Dhererka Dhexroorka | 40 (mm) |
| Xawaaraha Spindle-ka | 34-1200 (rpm) |
| Spindle Hole Taper | MT4 |
| Foomka xakamaynta | macmal ah |
| Warshadaha lagu dabaqi karo | Universal |
| Foomka Qaabka | Toosan |
| Baaxadda Codsiga | Universal |
| Shayga Shayga | Birta |
| Nooca Alaabta | Cusub |
| Adeegga Iibka Kadib | Bedelka Hal Sano |
| Is deji | Qaboojinta biyaha |
| Kor u qaadida Awooda Matoorka | 1.1kg |
| Gudbinta | Gear |
Tilmaamaha
| Tilmaamaha Z3040*10 Radial Drill (Hal Sariir) | |
| Magaca Alaabta | Radial Drill Press |
| Spindle Stroke | 200mm |
| Dhexroorka ugu badan ee godka la qoday | 40mm |
| Spindle Taper Hole | 4mm |
| Dhererka Gacan Rocker | 1 mitir |
| Spindle To Miiska | 260-1000mm |
| Awoodda Matoorka ugu weyn | 2200W |
| Spindle To Column | 320-1000mm |
| Kor u qaadida Awooda Matoorka | 1100W |
| Xawaaraha Spindle-ka | 34-1200r.pm |
| Xagasha Wareega Gacan Rocker | 360° |
| Taxanaha Xawaaraha Spindle-ka | Heerka 12 |
| Miisaanka Mashiinka oo dhan wuxuu ku saabsan yahay | 1000kg |
| Cabirka | 1.5m Dherer*0.65m Balac*2.2m Sare |
| Tilmaamaha Z3040*13 Radial Drill (Laba tiir) | |
| Magaca Alaabta | Radial Drill Press |
| Spindle Stroke | 200mm |
| Dhexroorka ugu badan ee godka la qoday | 40mm |
| Spindle Taper Hole | 4mm |
| Dhererka Gacan Rocker | 1.3 Mitir |
| Spindle To Miiska | 260-1100mm |
| Awoodda Matoorka ugu weyn | 2200W |
| Spindle To Column | 260-1300mm |
| Kor u qaadida Awooda Matoorka | 1100W |
| Xawaaraha Spindle-ka | 34-1200r.pm |
| Xagasha Wareega Gacan Rocker | 360° |
| Taxanaha Xawaaraha Spindle-ka | Heerka 12 |
| Miisaanka Mashiinka oo dhan wuxuu ku saabsan yahay | 1300kg |
| Cabirka | Dherer 1.8m*0.8m Balac*2.3m Sare |
MUUQAALKA SOO SAARKA IYO FAAHFAAHINTA
Tilmaam:
1. Xadhkaha dunta laydhka radial ee darajada wershadaha waxa uu qaataa darajada P5, oo leh saxnaan sare oo u dhigma.
2. Jidhku waxa uu ka samaysan yahay bir cawlan oo xoog badan.
3. Saldhiggu waa naqshad culus, hagaajintuna waa mid deggan.
4. Dusha sare waa la demiyay, qurux badan oo adag.
Faahfaahin:
1. Lagu sifeeyay birta cawlan (HT250).Mashiinka wax lagu sawiro ee band oo dhan waxa uu ka samaysan yahay bir cawlan (HT250), kaas oo leh cudud sare oo adkaysi badan, dushana waxa lagu buufiyaa caag si looga hortago miridhku.
2. Sanduuqa spindle-ka ee darajada P5 si toos ah ayuu hoos ugu dhigayaa qalabka.Tiir laba jibaaran + xirmooyinka furaha oo tayadoodu sareyso, goyn toos ah oo mindidu waa ka fudud oo ka saxsan.Naqshadeynta jeexdin-iska-caabista, ma fududa in la simbiriiriyo.
3. Naqshadaynta daaha labajibbaaran ee waaweyn.Oogada xidhiidhka weyn, xoog badan oo waara, oo adkaysi u leh garaacista.
4. Taayir-gacmeed oo bir ah oo tayo sare leh iyo qaab-dhismeedka laba-geesood.Gacan bir jireed iyo qaab dhismeedka jirka, daawaynta ka hortagga miridhku-chrome-plated, labadaba qurux iyo waarta.
5. hore iyo gadaal u garaacista iyo naqshadaynta saliidaha.Dheriga saliidda ee saliidda leh ayaa saliidayn kara geerka oo u isticmaali kara si habsami leh.Halka hoose waxa ku yaal badhan hore iyo gadaalba, kaas oo ka dhigi kara daloolku inuu hore u taabto oo uu xaglo rogo.
