Igwe na-adọkpụ aka na-agwụ ike Flat Radial Drilling Machine
Ozi ngwaahịa
| Ụdị | Radial Drill Press |
| Ụdị | MSK |
| Isi ike moto | 2.2 (kw) |
| Akụkụ | 1800*800*2300(mm) |
| Ọnụọgụ nke Axes | Otu Axis |
| Oke dayameta nke igwu mmiri | 40 (mm) |
| Ogologo Ọsọ Spindle | 34-1200 (rpm) |
| Spindle Hole Taper | MT4 |
| Ụdị njikwa | Artific |
| Ụlọ ọrụ ọdabara | Universal |
| Ụdị nhazi | kwụ ọtọ |
| Oke Ngwa | Universal |
| Ihe onwunwe | Ọla |
| Ụdị ngwaahịa | Kacha ọhụrụ |
| Ọrụ mgbe-ahịa | Ndochi otu afọ |
| Wetuo obi | Mmiri jụrụ oyi |
| Na-ebuli ike moto | 1.1kg |
| Mbufe | Ngwa |
Nkọwapụta
| Nkọwa nke Z3040*10 Radial Drill (Otu kọlụm) | |
| Aha ngwaahịa | Radial Drill Press |
| Spindle Stroke | 200mm |
| Oke dayameta nke oghere a kpụrụ akpụ | 40mm |
| Oghere Spindle Taper | 4mm |
| Ogologo ogwe aka Rocker | 1 mita |
| Spindle To Tebụl | 260-1000 mm |
| Isi ike moto | 2200W |
| Spindle ruo na kọlụm | 320-1000 mm |
| Na-ebuli ike moto | 1100W |
| Ogologo Ọsọ Spindle | 34-1200r.pm |
| Rocker Arm Rotation Angle | 360° |
| Spindle Speed Series | Ọkwa 12 |
| The arọ nke dum Machine bụ ihe | 1000kg |
| Akụkụ | Ogologo 1.5m * 0.65m obosara * 2.2m elu |
| Nkọwapụta nke Z3040*13 Radial Drill (ogidi abụọ) | |
| Aha ngwaahịa | Radial Drill Press |
| Spindle Stroke | 200mm |
| Oke dayameta nke oghere a kpụrụ akpụ | 40mm |
| Oghere Spindle Taper | 4mm |
| Ogologo ogwe aka Rocker | 1.3 mita |
| Spindle To Tebụl | 260-1100 mm |
| Isi ike moto | 2200W |
| Spindle ruo na kọlụm | 260-1300 mm |
| Na-ebuli ike moto | 1100W |
| Ogologo Ọsọ Spindle | 34-1200r.pm |
| Rocker Arm Rotation Angle | 360° |
| Spindle Speed Series | Ọkwa 12 |
| The arọ nke dum Machine bụ ihe | 1300kg |
| Akụkụ | Ogologo 1.8m * 0.8m obosara * 2.3m elu |
Atụmatụ ngwaahịa na nkọwa
Njirimara:
1. The ulo oru ọkwa radial akuakuzinwo spindle bear adopts P5 ọkwa, na elu kenha ziri ezi.
2. A na-eji ígwè nkedo isi awọ mee ahụ ya na ike dị elu.
3. Ntọala ahụ dị arọ karị, na nhazi ahụ na-akwụsi ike.
4. A na-emenyụ elu ahụ, mara mma ma sie ike.
Nkọwa:
1. Anụcha ya na ígwè isi awọ (HT250).A na-eji ígwè isi awọ (HT250) mee ihe igwe a na-ahụ maka ìgwè ahụ dum, nke nwere ike dị elu ma na-adịgide adịgide, a na-efesa elu ya na plastik iji gbochie nchara.
2. The P5 ọkwa spindle igbe na-akpaghị aka lowers ngwá ọrụ.Kọlụm okpukpu abụọ + mgbanaka igodo dị elu, ịkpụ mma akpaka dị mfe ma dịkwa mma.Concave mgbochi skid imewe, adịghị mfe ileghara.
3. Nnukwu square veneer imewe.Nnukwu ihu kọntaktị, siri ike ma na-adịgide adịgide, na-eguzogidekwa ịkụ aka.
4. Igwe aka igwe dị elu dị elu na nhazi kọlụm abụọ.Igwe nchara anụ ahụ na nhazi ahụ, ọgwụgwọ chrome-plated mgbochi nchara, ma mara mma ma dịgidere.
5. Na-aga n'ihu na azụ tapping na oiler imewe.Ite mmanụ na-ete mmanụ nwere ike ịmịnye ngwa ngwa ma jiri ya mee ihe nke ọma.Enwere bọtịnụ na-aga n'ihu na azụ na ala, nke nwere ike ime ka oghere ahụ na-aga n'ihu ma tụgharịa akụkụ.
