PriceList for R8 End Mill - HRC55 No Coating Carbide 3 Flutes Roughing End Mills – MSK

Product Detail

Product Tags

Feedback (2)

In an effort to provide you advantage and enlarge our business enterprise, we even have inspectors in QC Staff and assure you our greatest provider and item for Spiral Tap Drill Bit , Ball Mill Bit , 60 Degree Chamfer Mill , To achieve reciprocal advantages, our company is widely boosting our tactics of globalization in terms of communication with overseas customers, fast delivery, the best quality and long-term cooperation.

PriceList for R8 End Mill - HRC55 No Coating Carbide 3 Flutes Roughing End Mills – MSK Detail:

The roughing end mills have scallops on the outside diameter which causes the metal chips to break into smaller segments. This results in lower cutting pressures at a a given radial depth of cut.

Feature：

Coating: TiSiN, with very high surface hardness and good wear resistance, AlTiN, AlTiSiN is also avaiable

Product Design: Sharp wave and 35 helix angle design improve the chip removal capacity,widely used in slot, profile, rough.

Instructions for use

1. Before using this tool, please measure the tool deflection. If the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.

2. The shorter the length of the tool extension from the chuck, the better. If the extension of the tool is longer, please adjust the speed, in/out speed or cutting amount by yourself.

3. If abnormal vibration or sound occurs during cutting, please reduce the spindle speed and cutting amount until the situation improves.

4. The preferred method of cooling steel material is spray or air jet, so as to use cutters to achieve better results. It is recommended to use water-insoluble cutting fluid for stainless steel, titanium alloy or heat-resistant alloy.

5. The cutting method is affected by the workpiece, machine, and software. The above data is for reference only. After the cutting state is stable, the feed rate will be increased by 30%-50%.

Brand	MSK	Material	Aluminum alloy, aluminum parts
Type	End Mill	Flute Diameter D(mm)	6-20
Head Diameter d（mm）	6-20	Length (ℓ)(mm)	50-100
Certification	ISO9001	Package	Box

Advantage:

Flute Diameter(mm)

Flute Length(mm)

Head Diameter(mm)

Length(mm)

Flute

4	10	4	50	3/4
6	16	6	50	3/4
8	20	8	60	3/4
10	25	10	75	3/4
12	30	12	75	3/4
16	40	16	100	3/4
20	45	20	100	3/4

Use:

Widely used in many fields

Aviation Manufacturing

Machine Production

Car manufacturer

Mold making

Electrical Manufacturing

Lathe processing

Product detail pictures:

Related Product Guide:

"Sincerity, Innovation, Rigorousness, and Efficiency" could be the persistent conception of our organization for your long-term to establish alongside one another with shoppers for mutual reciprocity and mutual benefit for PriceList for R8 End Mill - HRC55 No Coating Carbide 3 Flutes Roughing End Mills – MSK , The product will supply to all over the world, such as: Detroit, Malta, Mauritius, Since the establishment of our company, we have realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it.

2 Inch Ball End Mill