OEM Factory for End Mill Sharpening Angles - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK
OEM Factory for End Mill Sharpening Angles - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK Detail:
Raw Material: Use ZK40SF with 12% Co content and 0.6um grain size
Coating: AlTiSiN, with the hardness and thermal stability are up to 4000HV and 1200℃, respectively
Tolerance of End Mill Diameter:1 ＜ D≤6 -0.010 ～ -0.030;6 ＜ D≤10 -0.015 ～ -0.040;10 ＜ D≤20 -0.020 ～ -0.050
The spiral angle is 35 degrees, which has strong adaptability to the material and hardness of the processed materials. With high cost performance，It is widely used in mold and product processing.
Advantage:1.The cutting edge is sharp and flat,even if magnified 100 times, there is no defect.2.Spiral double-edged belt can remove all kinds of machining burrs effectively.3.The fine research treatment of the groove bottom makes it easy to remove chip smoothly and make the operation more stable.4.The back chipping design is adopted at the cutter end to reduce the possibility of tool receiving trace during side milling. 5.Select high-quality wear-resistant materials, with concentrated particle size distribution of 0.4-0.6 micron ultra-fine particles, with high-quality wear resistance, which can greatly improve the tools life.
Specification:
| Item NO. | Diameter D | Cutting Length | Shank Diameter | Overall Length | Flutes |
| MSKEM4FA001 | 3 | 8 | 3 | 50 | 4 |
| MSKEM4FA002 | 1 | 3 | 4 | 50 | 4 |
| MSKEM4FA003 | 1.5 | 4 | 4 | 50 | 4 |
| MSKEM4FA004 | 2 | 6 | 4 | 50 | 4 |
| MSKEM4FA005 | 2.5 | 7 | 4 | 50 | 4 |
| MSKEM4FA006 | 3 | 8 | 4 | 50 | 4 |
| MSKEM4FA007 | 4 | 10 | 4 | 50 | 4 |
| MSKEM4FA008 | 5 | 13 | 5 | 50 | 4 |
| MSKEM4FA009 | 5 | 13 | 6 | 50 | 4 |
| MSKEM4FA010 | 6 | 15 | 6 | 50 | 4 |
| MSKEM4FA011 | 7 | 18 | 8 | 60 | 4 |
| MSKEM4FA012 | 8 | 20 | 8 | 60 | 4 |
| MSKEM4FA013 | 10 | 25 | 10 | 75 | 4 |
| MSKEM4FA014 | 12 | 30 | 12 | 75 | 4 |
| MSKEM4FA015 | 14 | 35 | 14 | 80 | 4 |
| MSKEM4FA016 | 14 | 45 | 14 | 100 | 4 |
| MSKEM4FA017 | 16 | 45 | 16 | 100 | 4 |
| MSKEM4FA018 | 18 | 45 | 18 | 100 | 4 |
| MSKEM4FA019 | 20 | 45 | 20 | 100 | 4 |
| Workpiece Material
|
||||||
| Carbon Steel | Alloy Steel | Cast Iron | Aluminium Alloy | Copper Alloy | Stainless Steel | Hardened Steel |
| Suitable | Suitable | Suitable | Suitable | Suitable | ||
Product detail pictures:
Related Product Guide:
As for competitive selling prices, we believe that you will be searching far and wide for anything that can beat us. We will state with absolute certainty that for such excellent at such charges we are the lowest around for OEM Factory for End Mill Sharpening Angles - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK , The product will supply to all over the world, such as: Mauritania, San Francisco, Miami, Immediate and expert after-sale service supplied by our consultant group has happy our buyers. Comprehensive Info and parameters from the merchandise will probably be sent to you for any comprehensive acknowledge. Free samples may be delivered and company check out to our corporation. n Morocco for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.
By Geraldine from South Korea - 2018.11.02 11:11
This company conforms to the market requirement and joins in the market competition by its high quality product, this is an enterprise that have Chinese spirit.
By Phoenix from Malaysia - 2018.11.28 16:25
