New Delivery for Variable Helix - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK
New Delivery for Variable Helix - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK Detail:
Raw Material: Use ZK40SF with 12% Co content and 0.6um grain size
Coating: AlTiSiN, with the hardness and thermal stability are up to 4000HV and 1200℃, respectively
Tolerance of End Mill Diameter:1 < D≤6 -0.010 ~ -0.030;6 < D≤10 -0.015 ~ -0.040;10 < D≤20 -0.020 ~ -0.050
The spiral angle is 35 degrees, which has strong adaptability to the material and hardness of the processed materials. With high cost performance,It is widely used in mold and product processing.
Advantage:1.The cutting edge is sharp and flat,even if magnified 100 times, there is no defect.2.Spiral double-edged belt can remove all kinds of machining burrs effectively.3.The fine research treatment of the groove bottom makes it easy to remove chip smoothly and make the operation more stable.4.The back chipping design is adopted at the cutter end to reduce the possibility of tool receiving trace during side milling. 5.Select high-quality wear-resistant materials, with concentrated particle size distribution of 0.4-0.6 micron ultra-fine particles, with high-quality wear resistance, which can greatly improve the tools life.
Specification:
Item NO. | Diameter D | Cutting Length | Shank Diameter | Overall Length | Flutes |
MSKEM4FA001 | 3 | 8 | 3 | 50 | 4 |
MSKEM4FA002 | 1 | 3 | 4 | 50 | 4 |
MSKEM4FA003 | 1.5 | 4 | 4 | 50 | 4 |
MSKEM4FA004 | 2 | 6 | 4 | 50 | 4 |
MSKEM4FA005 | 2.5 | 7 | 4 | 50 | 4 |
MSKEM4FA006 | 3 | 8 | 4 | 50 | 4 |
MSKEM4FA007 | 4 | 10 | 4 | 50 | 4 |
MSKEM4FA008 | 5 | 13 | 5 | 50 | 4 |
MSKEM4FA009 | 5 | 13 | 6 | 50 | 4 |
MSKEM4FA010 | 6 | 15 | 6 | 50 | 4 |
MSKEM4FA011 | 7 | 18 | 8 | 60 | 4 |
MSKEM4FA012 | 8 | 20 | 8 | 60 | 4 |
MSKEM4FA013 | 10 | 25 | 10 | 75 | 4 |
MSKEM4FA014 | 12 | 30 | 12 | 75 | 4 |
MSKEM4FA015 | 14 | 35 | 14 | 80 | 4 |
MSKEM4FA016 | 14 | 45 | 14 | 100 | 4 |
MSKEM4FA017 | 16 | 45 | 16 | 100 | 4 |
MSKEM4FA018 | 18 | 45 | 18 | 100 | 4 |
MSKEM4FA019 | 20 | 45 | 20 | 100 | 4 |
Workpiece Material
|
||||||
Carbon Steel | Alloy Steel | Cast Iron | Aluminium Alloy | Copper Alloy | Stainless Steel | Hardened Steel |
Suitable | Suitable | Suitable | Suitable | Suitable |
Product detail pictures:
Related Product Guide:
During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of New Delivery for Variable Helix - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK , The product will supply to all over the world, such as: Cyprus, Croatia, San Diego, If you are interested in any of our products and solutions or would like to discuss a custom order, remember to feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
By olivier musset from Romania - 2018.11.02 11:11
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Rachel from Mexico - 2018.12.10 19:03