Hot Selling for Roughing Ball Nose End Mill - HRC55 No Coating Carbide 3 Flutes Roughing End Mills – MSK
Hot Selling for Roughing Ball Nose End Mill - HRC55 No Coating Carbide 3 Flutes Roughing End Mills – MSK Detail:
The roughing end mills have scallops on the outside diameter which causes the metal chips to break into smaller segments. This results in lower cutting pressures at a a given radial depth of cut.
Feature：
Coating: TiSiN, with very high surface hardness and good wear resistance, AlTiN, AlTiSiN is also avaiable
Product Design: Sharp wave and 35 helix angle design improve the chip removal capacity,widely used in slot, profile, rough.
Instructions for use
1. Before using this tool, please measure the tool deflection. If the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.
2. The shorter the length of the tool extension from the chuck, the better. If the extension of the tool is longer, please adjust the speed, in/out speed or cutting amount by yourself.
3. If abnormal vibration or sound occurs during cutting, please reduce the spindle speed and cutting amount until the situation improves.
4. The preferred method of cooling steel material is spray or air jet, so as to use cutters to achieve better results. It is recommended to use water-insoluble cutting fluid for stainless steel, titanium alloy or heat-resistant alloy.
5. The cutting method is affected by the workpiece, machine, and software. The above data is for reference only. After the cutting state is stable, the feed rate will be increased by 30%-50%.
| Brand | MSK | Material | Aluminum alloy, aluminum parts |
| Type | End Mill | Flute Diameter D(mm) |
6-20 |
| Head Diameter d（mm） | 6-20 | Length (ℓ)(mm) | 50-100 |
| Certification |
|
Package | Box |
Advantage:
| Flute Diameter(mm) | Flute Length(mm) | Head Diameter(mm) | Length(mm) | Flute |
| 4 | 10 | 4 | 50 | 3/4 |
| 6 | 16 | 6 | 50 | 3/4 |
| 8 | 20 | 8 | 60 | 3/4 |
| 10 | 25 | 10 | 75 | 3/4 |
| 12 | 30 | 12 | 75 | 3/4 |
| 16 | 40 | 16 | 100 | 3/4 |
| 20 | 45 | 20 | 100 | 3/4 |
Use:
Widely used in many fields
Aviation Manufacturing
Machine Production
Car manufacturer
Mold making
Electrical Manufacturing
Lathe processing
Product detail pictures:
Related Product Guide:
Our pursuit and firm aim should be to "Always fulfill our buyer requirements". We carry on to produce and structure top-quality excellent solutions for equally our aged and new consumers and accomplish a win-win prospect for our consumers as well as us for Hot Selling for Roughing Ball Nose End Mill - HRC55 No Coating Carbide 3 Flutes Roughing End Mills – MSK , The product will supply to all over the world, such as: Latvia, Belgium, Liberia, Our company considers that selling is not only to gain profit but also popularize the culture of our company to the world. So we are working hard to give you the wholehearted service and willing to give you the most competitive price in the market
By Henry stokeld from South Korea - 2018.12.10 19:03
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Frank from Singapore - 2018.11.28 16:25
Send your message to us:
-
Bottom price Carbide Flat End Mill - Carbide C...
-
Super Purchasing for Carbide Insert End Mill -...
-
Factory made hot-sale 2.5 Mm End Mill - 2 flut...
-
Fast delivery 4 Flute Flat End Mill - HRC60 Ca...
-
Factory Supply Pcb End Mill - HRC 55 2-Flute B...
-
Best Price for End Mill Cutter Grinding Machine...
