Hot-selling End Mill 20mm - HRC55 Carbide 2 Flute Standard Length End Mills – MSK
Hot-selling End Mill 20mm - HRC55 Carbide 2 Flute Standard Length End Mills – MSK Detail:
Raw Material: Use ZK30UF with 12% Co content and 0.6um grain size
Coating: AlTiSiN, with the hardness and thermal stability are up to 4000HV and 1200℃, respectively
Tolerance of End Mill Diameter:1 < D≤6 -0.010 ~ -0.030;6 < D≤10 -0.015 ~ -0.040;10 < D≤20 -0.020 ~ -0.050
Coating:AlTiSiN,high aluminium content provides excellent hot hardness and oxidation resistance.
Flutes:2 flutes,good for chip removal easy for vertical feed processing , widely used in slot and hole processing.
Tolerance of End Mill Diameter:
1<D≤6 -0.010~-0.030
6<D≤10 -0.015~-0.040
10<D≤20 -0.020~-0.050
Cutting Parameters:
Vc =220(100-800)m/min
ap=1/2D(1/8-3/4D)
ae=1/2D(1/4-1D)
fz=0.15mm(0.02-0.2)
The spiral angle is 35 degrees, which has strong adaptability to the material and ha
Specification:
Item NO. | Diameter D | Cutting Length | Shank Diameter | Overall Length | Flutes |
MSKEM4FD001 | 3 | 8 | 3 | 50 | 2 |
MSKEM4FD002 | 1 | 3 | 4 | 50 | 2 |
MSKEM4FD003 | 1.5 | 4 | 4 | 50 | 2 |
MSKEM4FD004 | 2 | 6 | 4 | 50 | 2 |
MSKEM4FD005 | 2.5 | 7 | 4 | 50 | 2 |
MSKEM4FD006 | 3 | 8 | 4 | 50 | 2 |
MSKEM4FD007 | 4 | 10 | 4 | 50 | 2 |
MSKEM4FD008 | 5 | 13 | 5 | 50 | 2 |
MSKEM4FD009 | 5 | 13 | 6 | 50 | 2 |
MSKEM4FD010 | 6 | 15 | 6 | 50 | 2 |
MSKEM4FD011 | 7 | 18 | 8 | 60 | 2 |
MSKEM4FD012 | 8 | 20 | 8 | 60 | 2 |
MSKEM4FD013 | 10 | 25 | 10 | 75 | 2 |
MSKEM4FD014 | 12 | 30 | 12 | 75 | 2 |
MSKEM4FD015 | 14 | 35 | 14 | 80 | 2 |
MSKEM4FD016 | 14 | 45 | 14 | 100 | 2 |
MSKEM4FD017 | 16 | 45 | 16 | 100 | 2 |
MSKEM4FD018 | 18 | 45 | 18 | 100 | 2 |
MSKEM4FD019 | 20 | 45 | 20 | 100 | 2 |
Workpiece Material
|
||||||
Carbon Steel | Alloy Steel | Cast Iron | Aluminium Alloy | Copper Alloy | Stainless Steel | Hardened Steel |
Suitable | Suitable | Suitable | Suitable | Suitable |
Product detail pictures:
Related Product Guide:
The incredibly abundant projects administration experiences and 1 to one provider model make the superior importance of small business communication and our easy understanding of your expectations for Hot-selling End Mill 20mm - HRC55 Carbide 2 Flute Standard Length End Mills – MSK , The product will supply to all over the world, such as: Hamburg, Lebanon, Stuttgart, Our objective is "to supply first step products and best service for our customers, thus we are sure you must have a margin benefit through cooperating with us". If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
By Martina from Kenya - 2017.03.07 13:42
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Octavia from Milan - 2018.06.18 19:26