High Quality for Flat Nose End Mill - HRC55 Carbide 4 Flute Roughing End Mill – MSK

Product Detail

Product Tags

Feedback (2)

Our staff are usually in the spirit of "continuous improvement and excellence", and while using the top-quality high-quality items, favorable value and superior after-sales services, we try to acquire each and every customer's belief for End Mill Carbide Cutter , Flat Bottom End Mill , Taper End Mill Cutter , We welcome you to definitely inquire us by simply call or mail and hope to develop a prosperous and cooperative connection.

High Quality for Flat Nose End Mill - HRC55 Carbide 4 Flute Roughing End Mill – MSK Detail:

The roughing end mills have scallops on the outside diameter which causes the metal chips to break into smaller segments. This results in lower cutting pressures at a a given radial depth of cut.

Feature：

Coating: TiSiN, with very high surface hardness and good wear resistance, AlTiN, AlTiSiN is also avaiable

Product Design: Sharp wave and 35 helix angle design improve the chip removal capacity,widely used in slot, profile, rough.

Instructions for use

1. Before using this tool, please measure the tool deflection. If the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.

2. The shorter the length of the tool extension from the chuck, the better. If the extension of the tool is longer, please adjust the speed, in/out speed or cutting amount by yourself.

3. If abnormal vibration or sound occurs during cutting, please reduce the spindle speed and cutting amount until the situation improves.

4. The preferred method of cooling steel material is spray or air jet, so as to use cutters to achieve better results. It is recommended to use water-insoluble cutting fluid for stainless steel, titanium alloy or heat-resistant alloy.

5. The cutting method is affected by the workpiece, machine, and software. The above data is for reference only. After the cutting state is stable, the feed rate will be increased by 30%-50%.

Brand	MSK	Material	Aluminum alloy, aluminum parts
Type	End Mill	Flute Diameter D(mm)	6-20
Head Diameter d（mm）	6-20	Length (ℓ)(mm)	50-100
Certification	ISO9001	Package	Box

Advantage:

Flute Diameter(mm)

Flute Length(mm)

Head Diameter(mm)

Length(mm)

Flute

4	10	4	50	3/4
6	16	6	50	3/4
8	20	8	60	3/4
10	25	10	75	3/4
12	30	12	75	3/4
16	40	16	100	3/4
20	45	20	100	3/4

Use:

Widely used in many fields

Aviation Manufacturing

Machine Production

Car manufacturer

Mold making

Electrical Manufacturing

Lathe processing

Product detail pictures:

Related Product Guide:

carry on to further improve, to guarantee merchandise high-quality in line with market and buyer standard necessities. Our organization has a top quality assurance procedure have already been established for High Quality for Flat Nose End Mill - HRC55 Carbide 4 Flute Roughing End Mill – MSK , The product will supply to all over the world, such as: Colombia, French, Pretoria, We are looking forward to cooperating closely with you to our mutual benefits and top development. We guaranteed quality, if customers were not satisfied with the products' quality, you can return within 7days with their original states.

22mm End Mill