High Quality for 6mm Twist Drill Bits - HRC55 carbide spot drill for Aluminium – MSK
High Quality for 6mm Twist Drill Bits - HRC55 carbide spot drill for Aluminium – MSK Detail:
Feature:
- Products in stock are uncoated, various coatings available according to your needs.
- Excellent wear resistance and long using life
- Spotting drills can perform both centering and chamfering. Precise position the holes and chamfer are accomplished at one time to improve the processing efficiency.
- Workpiece material: Suitable for general steels, alloy steels, tempered steels, casr iron and aluminium alloy, etc.
Notice:
- Fixed-point drilling can only be used for fixed-pointing, dotting, and chamfering, and must not be used for drilling
- Be sure to test the yaw of the tool before use, please select correction when it exceeds 0.01mm
- Fixed-point drilling is formed by one-time processing of fixed-point + chamfering. If you want to process a 5mm hole, you generally choose a 6mm fixed-point drill, so that subsequent drilling will not be deflected, and a 0.5mm chamfer can be obtained.
| Workpiece Material | Aluminium | Material | Tungsten |
| Angle | 90 degree | Flute | 2 |
| Coating | No | Brand | MSK |
| Diameter (mm) |
Flute | Total Length(mm) | Angle | Shank Diameter(mm) | |||||
|
3 |
2 |
50 |
90 |
3 |
|||||
|
4 |
2 |
50 |
90 |
4 |
|||||
|
5 |
2 |
50 |
90 |
5 |
|||||
|
6 |
2 |
50 |
90 |
6 |
|||||
|
8 |
2 |
60 |
90 |
8 |
|||||
|
10 |
2 |
75 |
90 |
10 |
|||||
|
12 |
2 |
75 |
90 |
12 |
|||||
Use:
Widely used in many fields
Aviation Manufacturing
Machine Production
Car manufacturer
Mold making
Electrical Manufacturing
Lathe processing
Product detail pictures:
Related Product Guide:
Good quality comes to start with; service is foremost; organization is cooperation" is our enterprise philosophy which is regularly observed and pursued by our firm for High Quality for 6mm Twist Drill Bits - HRC55 carbide spot drill for Aluminium – MSK , The product will supply to all over the world, such as: Kyrgyzstan, Austria, Sudan, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We have tightened inspection for quality of product.
By mary rash from Palestine - 2018.09.21 11:01
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Margaret from Roman - 2018.05.22 12:13
Send your message to us:
Write your message here and send it to us
