Factory source Round Nose End Mill - HRC55 Carbide 2 Flute Standard Length End Mills – MSK
Factory source Round Nose End Mill - HRC55 Carbide 2 Flute Standard Length End Mills – MSK Detail:
Raw Material: Use ZK30UF with 12% Co content and 0.6um grain size
Coating: AlTiSiN, with the hardness and thermal stability are up to 4000HV and 1200℃, respectively
Tolerance of End Mill Diameter:1 < D≤6 -0.010 ~ -0.030;6 < D≤10 -0.015 ~ -0.040;10 < D≤20 -0.020 ~ -0.050
Coating:AlTiSiN,high aluminium content provides excellent hot hardness and oxidation resistance.
Flutes:2 flutes,good for chip removal easy for vertical feed processing , widely used in slot and hole processing.
Tolerance of End Mill Diameter:
1<D≤6 -0.010~-0.030
6<D≤10 -0.015~-0.040
10<D≤20 -0.020~-0.050
Cutting Parameters:
Vc =220(100-800)m/min
ap=1/2D(1/8-3/4D)
ae=1/2D(1/4-1D)
fz=0.15mm(0.02-0.2)
The spiral angle is 35 degrees, which has strong adaptability to the material and ha
Specification:
Item NO. | Diameter D | Cutting Length | Shank Diameter | Overall Length | Flutes |
MSKEM4FD001 | 3 | 8 | 3 | 50 | 2 |
MSKEM4FD002 | 1 | 3 | 4 | 50 | 2 |
MSKEM4FD003 | 1.5 | 4 | 4 | 50 | 2 |
MSKEM4FD004 | 2 | 6 | 4 | 50 | 2 |
MSKEM4FD005 | 2.5 | 7 | 4 | 50 | 2 |
MSKEM4FD006 | 3 | 8 | 4 | 50 | 2 |
MSKEM4FD007 | 4 | 10 | 4 | 50 | 2 |
MSKEM4FD008 | 5 | 13 | 5 | 50 | 2 |
MSKEM4FD009 | 5 | 13 | 6 | 50 | 2 |
MSKEM4FD010 | 6 | 15 | 6 | 50 | 2 |
MSKEM4FD011 | 7 | 18 | 8 | 60 | 2 |
MSKEM4FD012 | 8 | 20 | 8 | 60 | 2 |
MSKEM4FD013 | 10 | 25 | 10 | 75 | 2 |
MSKEM4FD014 | 12 | 30 | 12 | 75 | 2 |
MSKEM4FD015 | 14 | 35 | 14 | 80 | 2 |
MSKEM4FD016 | 14 | 45 | 14 | 100 | 2 |
MSKEM4FD017 | 16 | 45 | 16 | 100 | 2 |
MSKEM4FD018 | 18 | 45 | 18 | 100 | 2 |
MSKEM4FD019 | 20 | 45 | 20 | 100 | 2 |
Workpiece Material
|
||||||
Carbon Steel | Alloy Steel | Cast Iron | Aluminium Alloy | Copper Alloy | Stainless Steel | Hardened Steel |
Suitable | Suitable | Suitable | Suitable | Suitable |
Product detail pictures:
Related Product Guide:
We retain bettering and perfecting our goods and service. At the same time, we perform actively to do research and enhancement for Factory source Round Nose End Mill - HRC55 Carbide 2 Flute Standard Length End Mills – MSK , The product will supply to all over the world, such as: Bolivia, Bogota, Armenia, we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We will work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.
By Dolores from Angola - 2017.08.16 13:39
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Ada from Iran - 2018.06.30 17:29