Factory selling 3.175 Mm End Mill - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK
Factory selling 3.175 Mm End Mill - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK Detail:
Raw Material: Use ZK40SF with 12% Co content and 0.6um grain size
Coating: AlTiSiN, with the hardness and thermal stability are up to 4000HV and 1200℃, respectively
Tolerance of End Mill Diameter:1 < D≤6 -0.010 ~ -0.030;6 < D≤10 -0.015 ~ -0.040;10 < D≤20 -0.020 ~ -0.050
The spiral angle is 35 degrees, which has strong adaptability to the material and hardness of the processed materials. With high cost performance,It is widely used in mold and product processing.
Advantage:1.The cutting edge is sharp and flat,even if magnified 100 times, there is no defect.2.Spiral double-edged belt can remove all kinds of machining burrs effectively.3.The fine research treatment of the groove bottom makes it easy to remove chip smoothly and make the operation more stable.4.The back chipping design is adopted at the cutter end to reduce the possibility of tool receiving trace during side milling. 5.Select high-quality wear-resistant materials, with concentrated particle size distribution of 0.4-0.6 micron ultra-fine particles, with high-quality wear resistance, which can greatly improve the tools life.
Specification:
Item NO. | Diameter D | Cutting Length | Shank Diameter | Overall Length | Flutes |
MSKEM4FA001 | 3 | 8 | 3 | 50 | 4 |
MSKEM4FA002 | 1 | 3 | 4 | 50 | 4 |
MSKEM4FA003 | 1.5 | 4 | 4 | 50 | 4 |
MSKEM4FA004 | 2 | 6 | 4 | 50 | 4 |
MSKEM4FA005 | 2.5 | 7 | 4 | 50 | 4 |
MSKEM4FA006 | 3 | 8 | 4 | 50 | 4 |
MSKEM4FA007 | 4 | 10 | 4 | 50 | 4 |
MSKEM4FA008 | 5 | 13 | 5 | 50 | 4 |
MSKEM4FA009 | 5 | 13 | 6 | 50 | 4 |
MSKEM4FA010 | 6 | 15 | 6 | 50 | 4 |
MSKEM4FA011 | 7 | 18 | 8 | 60 | 4 |
MSKEM4FA012 | 8 | 20 | 8 | 60 | 4 |
MSKEM4FA013 | 10 | 25 | 10 | 75 | 4 |
MSKEM4FA014 | 12 | 30 | 12 | 75 | 4 |
MSKEM4FA015 | 14 | 35 | 14 | 80 | 4 |
MSKEM4FA016 | 14 | 45 | 14 | 100 | 4 |
MSKEM4FA017 | 16 | 45 | 16 | 100 | 4 |
MSKEM4FA018 | 18 | 45 | 18 | 100 | 4 |
MSKEM4FA019 | 20 | 45 | 20 | 100 | 4 |
Workpiece Material
|
||||||
Carbon Steel | Alloy Steel | Cast Iron | Aluminium Alloy | Copper Alloy | Stainless Steel | Hardened Steel |
Suitable | Suitable | Suitable | Suitable | Suitable |
Product detail pictures:
Related Product Guide:
Our organization insists all along the quality policy of "product quality is base of business survival; purchaser gratification is the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as the consistent purpose of "reputation 1st, purchaser first" for Factory selling 3.175 Mm End Mill - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK , The product will supply to all over the world, such as: Morocco, Auckland, Rio de Janeiro, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we are trying our best to be your good partner.
By Aurora from Angola - 2017.03.08 14:45
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Julie from Ecuador - 2018.11.02 11:11