Factory Free sample 2-Flute Ball Nose End Mill - Single-edge flute end mill for aluminum – MSK
Factory Free sample 2-Flute Ball Nose End Mill - Single-edge flute end mill for aluminum – MSK Detail:
| Brand | MSK |
| Material | Aluminum, aluminum alloy |
| Type | End Mill |
| Flute Diameter D(mm) | 1-8 |
| Shank Diameterd（mm） | 3.175-8 |
| Flute Length (ℓ)(mm) | 3-32 |
| Certification | ISO9001 |
| Applicable machine tool | Engraving machine, engraving machine, CNC machine tool |
Advantage:
1.Easily Discharge Waste
2.Not Stick to Cutter
3.Low Noise
4.High Finish
Feature:
1.Super Sharp Flute Edge
Completely new flute edge design, perfectly improved cutter performance.
2.Super Smooth Chip Evacuation
Redesigned large chip flutes while ensuring that the cutter is strong. The chip removal performance is greatly improved to prevent chip sticking.
3.High Precision Spiral
We tested out perfect spiral precision solution based on previous spiral, more smoothly on cutting and outfeeding.
Operation Manual
In order to avoid the cutter from twisting due to excessive pressure,all cutting bits aredesigned to rotate clockwise.
When all the cutters are finished,they have passed the balance test to ensure thatthere is no doubt about runaway. In order to again ensure that the tools are free fromswing and runout during use,please pay attention to selecting machinery and equip-ment and excellent jackets.
The jacket must be of appropriate size. If the jacket is found to be rusty or worn,thejacket will not be able to clamp the cutter properly and correctly. Please replace thejacket with standard specifications immediately to avoid the cutter from rotating athigh speed handle vibration,flying off or breaking the knife.
The installation of the cutter shank should be in accordance with EU regulations,and the clamping depth of the cutter shank must be more than 3 times the diameter of the shank to maintain the proper pressure bearing range of the shank.
Cutter with larger outer diameters should be set according to the following tachometer,and slowly advance to maintain a uniform advance speed. Do not stop the advance during the cutting process. When the cutter is blunt, please replace it with a new one.Do not continue to use it to avoid tool breakage and work-related accidents.Choose the corresponding cutter for different materials. When operating and processing,please wear safety glasses and push the handle safely. When using desktop ma-chines and equipment,you also need to use anti-rebound devices to avoid accidents caused by rebounding of work objects during high-speed cutting.
| Shank Diameter(mm) | Flute Diameter(mm) | Flute Length(mm) | Total Length(mm) |
| 3.175 | 1 | 3 | 38.5 |
| 3.175 | 2 | 4 | 38.5 |
| 3.175 | 2 | 6 | 38.5 |
| 3.175 | 3.175 | 6 | 38.5 |
| 3.175 | 3.175 | 8 | 38.5 |
| 4 | 4 | 12 | 45 |
| 5 | 5 | 15 | 50 |
| 5 | 5 | 17 | 50 |
| 6 | 6 | 12 | 50 |
| 6 | 6 | 15 | 50 |
| 6 | 6 | 17 | 50 |
| 8 | 8 | 22 | 60 |
| 8 | 8 | 25 | 60 |
| 8 | 8 | 32 | 75 |
Use
Aviation Manufacturing
Machine Production
Car manufacturer
Mold making
Electrical Manufacturing
Lathe processing
Product detail pictures:
Related Product Guide:
We now have a specialist, efficiency workforce to deliver excellent service for our purchaser. We always follow the tenet of customer-oriented, details-focused for Factory Free sample 2-Flute Ball Nose End Mill - Single-edge flute end mill for aluminum – MSK , The product will supply to all over the world, such as: Washington, Seychelles, Egypt, Selling our products and solutions causes no risks and brings high returns to your company instead. It is our consistent pursuit to create value for clients. Our company is looking for agents sincerely. What are you waiting for? Come and join us. Now or never.
By Sabina from Greek - 2018.12.22 12:52
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Fay from Canada - 2018.12.10 19:03
Send your message to us:
-
Factory Price For Conical Reamer - CarbiLde Re...
-
Factory directly supply Lathe End Mill - Micro...
-
High definition 4.5 Mm Reamer - CarbiLde Reame...
-
Hot-selling End Mill 20mm - HRC55 No Coating C...
-
Factory source 2-Flute Ball Nose End Mill With ...
-
Cheap PriceList for End Mill Suppliers - 2 flu...
