Factory For Radius End Mill - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK
Factory For Radius End Mill - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK Detail:
Raw Material: Use ZK40SF with 12% Co content and 0.6um grain size
Coating: AlTiSiN, with the hardness and thermal stability are up to 4000HV and 1200℃, respectively
Tolerance of End Mill Diameter:1 ＜ D≤6 -0.010 ～ -0.030;6 ＜ D≤10 -0.015 ～ -0.040;10 ＜ D≤20 -0.020 ～ -0.050
The spiral angle is 35 degrees, which has strong adaptability to the material and hardness of the processed materials. With high cost performance，It is widely used in mold and product processing.
Advantage:1.The cutting edge is sharp and flat,even if magnified 100 times, there is no defect.2.Spiral double-edged belt can remove all kinds of machining burrs effectively.3.The fine research treatment of the groove bottom makes it easy to remove chip smoothly and make the operation more stable.4.The back chipping design is adopted at the cutter end to reduce the possibility of tool receiving trace during side milling. 5.Select high-quality wear-resistant materials, with concentrated particle size distribution of 0.4-0.6 micron ultra-fine particles, with high-quality wear resistance, which can greatly improve the tools life.
Specification:
| Item NO. | Diameter D | Cutting Length | Shank Diameter | Overall Length | Flutes |
| MSKEM4FA001 | 3 | 8 | 3 | 50 | 4 |
| MSKEM4FA002 | 1 | 3 | 4 | 50 | 4 |
| MSKEM4FA003 | 1.5 | 4 | 4 | 50 | 4 |
| MSKEM4FA004 | 2 | 6 | 4 | 50 | 4 |
| MSKEM4FA005 | 2.5 | 7 | 4 | 50 | 4 |
| MSKEM4FA006 | 3 | 8 | 4 | 50 | 4 |
| MSKEM4FA007 | 4 | 10 | 4 | 50 | 4 |
| MSKEM4FA008 | 5 | 13 | 5 | 50 | 4 |
| MSKEM4FA009 | 5 | 13 | 6 | 50 | 4 |
| MSKEM4FA010 | 6 | 15 | 6 | 50 | 4 |
| MSKEM4FA011 | 7 | 18 | 8 | 60 | 4 |
| MSKEM4FA012 | 8 | 20 | 8 | 60 | 4 |
| MSKEM4FA013 | 10 | 25 | 10 | 75 | 4 |
| MSKEM4FA014 | 12 | 30 | 12 | 75 | 4 |
| MSKEM4FA015 | 14 | 35 | 14 | 80 | 4 |
| MSKEM4FA016 | 14 | 45 | 14 | 100 | 4 |
| MSKEM4FA017 | 16 | 45 | 16 | 100 | 4 |
| MSKEM4FA018 | 18 | 45 | 18 | 100 | 4 |
| MSKEM4FA019 | 20 | 45 | 20 | 100 | 4 |
| Workpiece Material
|
||||||
| Carbon Steel | Alloy Steel | Cast Iron | Aluminium Alloy | Copper Alloy | Stainless Steel | Hardened Steel |
| Suitable | Suitable | Suitable | Suitable | Suitable | ||
Product detail pictures:
Related Product Guide:
We believe that long time period partnership is a result of top of the range, value added services, rich expertise and personal contact for Factory For Radius End Mill - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK , The product will supply to all over the world, such as: kazakhstan, Greece, Lesotho, We insist on "Quality First, Reputation First and Customer First". We are committed to providing high-quality products and good after-sales services. Up to now, our products have been exported to more than 60 countries and areas around the world, such as America, Australia and Europe. We enjoy a high reputation at home and abroad. Always persisting in the principle of "Credit, Customer and Quality", we expect cooperation with people in all walks of life for mutual benefits.
By Edwina from Botswana - 2018.12.10 19:03
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Megan from Norway - 2017.06.22 12:49
