Europe style for Ball Nose End Mill Slotting - HRC55 Carbide 4 Flute Roughing End Mill – MSK

Product Detail

Product Tags

Feedback (2)

Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Spiral Point Tap Definition , Cobalt End Mill , Double-Edged Taper Ball Cutter End Mill , We can do your customized order to meet your own satisfactory! Our company sets up several departments, including production department, sales department, quality control department and sevice center, etc.

Europe style for Ball Nose End Mill Slotting - HRC55 Carbide 4 Flute Roughing End Mill – MSK Detail:

The roughing end mills have scallops on the outside diameter which causes the metal chips to break into smaller segments. This results in lower cutting pressures at a a given radial depth of cut.

Feature：

Coating: TiSiN, with very high surface hardness and good wear resistance, AlTiN, AlTiSiN is also avaiable

Product Design: Sharp wave and 35 helix angle design improve the chip removal capacity,widely used in slot, profile, rough.

Instructions for use

1. Before using this tool, please measure the tool deflection. If the tool deflection accuracy exceeds 0.01mm, please correct it before cutting.

2. The shorter the length of the tool extension from the chuck, the better. If the extension of the tool is longer, please adjust the speed, in/out speed or cutting amount by yourself.

3. If abnormal vibration or sound occurs during cutting, please reduce the spindle speed and cutting amount until the situation improves.

4. The preferred method of cooling steel material is spray or air jet, so as to use cutters to achieve better results. It is recommended to use water-insoluble cutting fluid for stainless steel, titanium alloy or heat-resistant alloy.

5. The cutting method is affected by the workpiece, machine, and software. The above data is for reference only. After the cutting state is stable, the feed rate will be increased by 30%-50%.

Brand	MSK	Material	Aluminum alloy, aluminum parts
Type	End Mill	Flute Diameter D(mm)	6-20
Head Diameter d（mm）	6-20	Length (ℓ)(mm)	50-100
Certification	ISO9001	Package	Box

Advantage:

Flute Diameter(mm)

Flute Length(mm)

Head Diameter(mm)

Length(mm)

Flute

4	10	4	50	3/4
6	16	6	50	3/4
8	20	8	60	3/4
10	25	10	75	3/4
12	30	12	75	3/4
16	40	16	100	3/4
20	45	20	100	3/4

Use:

Widely used in many fields

Aviation Manufacturing

Machine Production

Car manufacturer

Mold making

Electrical Manufacturing

Lathe processing

Product detail pictures:

Related Product Guide:

Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs of Europe style for Ball Nose End Mill Slotting - HRC55 Carbide 4 Flute Roughing End Mill – MSK , The product will supply to all over the world, such as: Madagascar, Jamaica, Monaco, We sincerely hope to cooperate with customers all over the world, if you would like to have more information, make sure you kindly contact us, we have been looking forward to building up a great business relationship with you.

2-Flute Ball Nose End Mill