CNC Carbide Hockproof A Gwrth-dirgryniad Cloi Dannedd Toolholder Melino Deildy
Nodwedd:
Mae'r cynnyrch hwn yn bar offer gwrth-dirgryniad, gwrth-dirgryniad dur twngsten, wedi'i ddiffodd a'i galedu.Prosesu twll dwfn, aml-bwrpas, darn cloi
Edau mân, ffit dwysedd uchel.Gan ddefnyddio dylunio technoleg Taiwan, prosesu peiriant gwerthyd, mowldio un-amser, fel bod y pen clo a'r post yn cael eu bondio gyda'i gilydd i ffurfio cyfanwaith, er mwyn cyflawni cywirdeb uwch a gwell ansawdd cynnyrch.
Mae defnyddio deunydd aloi dur twngsten solet, perfformiad seismig da, dyfnder prosesu dwfn, darn offer y gellir ei ailosod yn offeryn pwerus ar gyfer prosesu melino dwfn
Aml-bwrpas, cost-effeithiol.Gellir defnyddio un deildy gydag amrywiaeth o bennau cloi, gan arbed costau
| Cyfanswm hyd L | Diamedr Shank | Diamedr Twll | Edau M |
| 100 | 8 | 4.5 | M4 |
| 100 | 10 | 5.5 | M5 |
| 150 | 10 | 5.5 | M5 |
| 100 | 12 | 6.5 | M6 |
| 150 | 12 | 6.5 | M6 |
| 200 | 12 | 6.5 | M6 |
| 150 | 14 | M8 | |
| 200 | 14 | M8 | |
| 100 | 15 | 8.5 | M8 |
| 150 | 15 | 8.5 | M8 |
| 200 | 15 | 8.5 | M8 |
| 150 | 15.6 | 8.5 | M8 |
| 200 | 15.6 | 8.5 | M8 |
| 250 | 15.6 | 8.5 | M8 |
| 100 | 16 | 8.5 | M8 |
| 150 | 16 | 8.5 | M8 |
| 200 | 16 | 8.5 | M8 |
| 250 | 16 | 8.5 | M8 |
| 300 | 16 | 8.5 | M8 |
| 130 | 18 | M10 | |
| 200 | 18 | M10 | |
| 300 | 18 | M10 | |
| 150 | 19 | 10.5 | M10 |
| 200 | 19 | 10.5 | M10 |
| 250 | 19 | 10.5 | M10 |
| 300 | 19 | 10.5 | M10 |
| 100 | 20 | 10.5 | M10 |
| 150 | 20 | 10.5 | M10 |
| 200 | 20 | 10.5 | M10 |
| 250 | 20 | 10.5 | M10 |
| 300 | 20 | 10.5 | M10 |
| 150 | 23 | M12 | |
| 200 | 23 | M12 | |
| 270 | 23 | M12 | |
| 350 | 23 | M12 | |
| 150 | 23 | 12.5 | M12 |
| 200 | 24 | 12.5 | M12 |
| 250 | 24 | 12.5 | M12 |
| 300 | 24 | 12.5 | M12 |
| 100 | 24 | 12.5 | M12 |
| 150 | 25 | 12.5 | M12 |
| 200 | 25 | 12.5 | M12 |
| 250 | 25 | 12.5 | M12 |
| 300 | 25 | 12.5 | M12 |
| 350 | 25 | 12.5 | M12 |
| 150 | 28 | M16 | |
| 230 | 28 | M16 | |
| 350 | 28 | M16 | |
| 150 | 31 | M16 | |
| 200 | 31 | M16 | |
| 250 | 31 | M16 | |
| 300 | 31 | M16 | |
| 350 | 31 | M16 | |
| 400 | 31 | M16 | |
| 100 | 32 | 17 | M16 |
| 150 | 32 | 17 | M16 |
| 200 | 32 | 17 | M16 |
| 250 | 32 | 17 | M16 |
| 300 | 32 | 17 | M16 |
| 350 | 32 | 17 | M16 |
| 400 | 32 | 17 | M16 |
Anfonwch eich neges atom:
Ysgrifennwch eich neges yma a'i hanfon atom
