English

I-Z13D Portable Drill Bit Sharpener – φ3-13mm HSS/Carbide Grinder ene-120W Motor

I-Z13D Portable Drill Bit Sharpener – φ3-13mm HSS/Carbide Grinder ene-120W Motor Isithombe Esivelele
  • I-Z13D Portable Drill Bit Sharpener – φ3-13mm HSS/Carbide Grinder ene-120W Motor
  • I-Z13D Portable Drill Bit Sharpener – φ3-13mm HSS/Carbide Grinder ene-120W Motor
  • I-Z13D Portable Drill Bit Sharpener – φ3-13mm HSS/Carbide Grinder ene-120W Motor
  • I-Z13D Portable Drill Bit Sharpener – φ3-13mm HSS/Carbide Grinder ene-120W Motor


  • Imodeli:I-Z13D
  • Uhla lokugaya:3-13 (4)
  • Isisindo:9KG

    • Imininingwane Yomkhiqizo

    Amathegi Omkhiqizo

    ama-burr tool burr bits

    Ukubuka Konke Komkhiqizo We-Z13D Portable Drill Bit Sharpener

    I-Z13D iyisiteshi sokulola esilula, esizimele se-HSS, i-cobalt, kanye ne-carbide drill bits esisukela ku-3 mm kuya ku-13 mm (isekela ubuningi obungu-14 mm). Ngokungafani nama-bench grinders amakhulu ashisa kakhulu futhi onakalise i-temperature, lo mshini usebenzisa i-120W all-copper motor spinning ku-4400 RPM ukuze ulethe ukugaya okupholile nokunembile. Inesisindo esingu-9 kg kuphela futhi ithatha u-0.02 m³, ingena kunoma yiliphi ibhentshi lokusebenza noma ihamba kalula ezindaweni zomsebenzi.

    Umshini Wokulola Ama-Drill Bit Ochwepheshe

    Ukubuyiselwa Kwendawo Ezintathu – Akuyona Ithiphu Nje

    Iningi lama-sharpener lithinta i-engeli yephuzu kuphela. I-Z13D ibuyisela izindawo ezintathu ezibalulekile:

    • I-engeli yephoyinti (elungisekayo ngo-90°–140°) – ihambisana nemininingwane yokuqala yezinto ezahlukene.
    • Unqenqema olungaphambili (i-positive rake) – luqinisekisa ukucheba ama-chips ngempumelelo.
    • I-flute ye-chip (i-angle yokukhulula) - elungiseka kalula ukuvimbela ukuvaleka kwemigodi ejulile.

    Ngaphezu kwalokho, unqenqema lwe-chisel oluphakathi luyakwazi ukulungiswa ngokuphelele. Lesi sici sivumela umshini ukuthi usebenze njenge-drill ephakathi eyakhelwe ngaphakathi, siqeda ukuhamba futhi sithuthukise ukunemba kokugxila - okubaluleke kakhulu lapho kubholwa insimbi engagqwali noma ama-alloy aqinile.

    Isondo Lokugaya Idayimane LaseTaiwan – 5µm Ukunemba

    Isondo lokugaya idayimane elenziwe eTaiwan ligcina ukubekezelela okungu-≤5 microns. Lihlala libukhali imijikelezo yokulola kabusha engaphezu kuka-3,000, okukuvumela ukuthi ubuyisele izindleko zomshini ngokusetshenziswa kwansuku zonke kwengxenye yenyanga endaweni encane yokusebenzela. Shintsha isondo eligugile kanye noma kabili ngonyaka ngaphansi kokusetshenziswa okuvamile.

    Umjikelezo Wesibili We-10 Ugcina Ukuhamba Komsebenzi Kuhamba

    Umsebenzi ojwayelekile wokulola uthatha imizuzwana eyi-10 kusukela ekusethweni kuze kube sekupheleni. Indlela yokusetha amathuluzi ikhomba i-bit ngomphetho wayo wokuqala we-center chisel, ngakho-ke ngisho nomsebenzisi ongenalwazi ufinyelela ukulingana okufanele kuzo zombili izinqe zokusika. Akunasidingo sokuthumela ama-bit ukuze alolwe ngobuchwepheshe - kwenze lapho bese ubuyela ekubholeni ngokushesha.

    Imininingwane Yobuchwepheshe Ngokushesha

     
    Ipharamitha Imininingwane
    Imodeli I-Z13D
    Izinhlobo zokubhoboza I-HSS, i-cobalt, ama-carbide twist bits
    Ububanzi bebanga φ3 – φ13 mm (φ14 ubuningi)
    I-engeli yephoyinti 90° – 140°
    Injini 120W, ithusi lonke
    Isivinini 4400 RPM
    Amandla I-AC 220V ±10% (110V uma uthanda)
    Ubukhulu 36 × 21 × 19 cm
    Isisindo sengqikithi 9 kg
    Isondo lokugaya Idayimane laseTaiwan, ≤5 µm
    Isikhathi sokuphila kwesondo imijikelezo engaphezu kuka-3000
    Umshini Wokulola Kabusha We-Drill Bit
    Umshini wokugaya wokugaya nokugaya
    Umshini Wokulola Ama-Drill Bit Ochwepheshe

    Yakhelwe Ukuqina Kwendawo Yokusebenzela

    Indlu ine-powder coating eqinisekisiwe yi-EU EPD, emelana namafutha, izinyibilikisi, kanye nemihuzuko. Injini yethusi kuphela isebenza kahle kakhulu kunezinye izindlela zokusebenzisa i-aluminium wound, yandisa isikhathi senkonzo.

    Ubani Osebenzisa i-Z13D?

    • Izitolo zokuqasha amathuluzi - lungisa izingxenye phakathi kokuqasha, gcina isitokwe sibukhali.
    • Ukwakhiwa nokugcinwa kwensimu – isisindo esingu-9 kg senza kube lula ukukuthwala iloli.
    • Izitolo zokukhiqiza insimbi – ukulola kabusha ama-HSS/carbide bits nsuku zonke.
    • Amagaraji okuzenzela – umshini owodwa uyazikhokhela wona ngemva kwama-bits angu-20-30 aphinde alolwa.
    • Imizila yokukhiqiza – ukulola kabusha phansi ngaphandle kokuthumela amathuluzi.

    Ukusebenza Okulula - Akukho Ukuqeqeshwa Okudingekayo

    1. Faka i-drill bit ku-collet efanayo.
    2. Setha i-engeli yephuzu olifunayo (90°–140°) usebenzisa idayari.
    3. Lungisa indawo yomphetho we-chisel (ehlukile ku-Z13D).
    4. Qala ukugaya – ukuthinta okuzenzakalelayo, imizuzwana eyi-10.
    5. Phendula ukuze uthole umkhawulo wesibili osezingeni eliphezulu – ukulingana kugcinwa ngokuzenzakalelayo.

    Okuqukethwe Kwephakheji Nokuthunyelwa

    • Umshini we-Z13D onesondo ledayimane elifakwe ngaphambilini
    • Isethi ye-Collet (ye-φ3–φ13 mm)
    • Ama-wrench e-Hex kanye nencwadi yokusebenza
    • Ukupakisha: Ibhokisi eliqinisiwe eline-foam, ~40×25×25 cm, isisindo esiphelele ~10 kg
    • Ukuthunyelwa: Olwandle, emoyeni, noma okusheshayo

    Izinketho ze-OEM

    Sinikeza ukwenza ngokwezifiso ama-oda amaningi:

    • Umbala womshini owenziwe ngokwezifiso
    • Ilogo yomkhiqizo ezindlini
    • Umklamo owenziwe ngesandla ngokwezifiso
    • Ukukhetha i-voltage engu-110V / 220V
    • Ama-grit amasondo ahlukile wezinto ezikhethekile

    Thuthukisa indlela yakho yokusebenza yokubhoboza nge-Z13D – ukulola kabusha ngokunemba okuhambisana nebhentshi lakho kanye nesabelomali sakho.

    Mayelana NATHI

    Yasungulwa ngo-2015, i-MSK (Tianjin) International Trading CO., Ltd ikhule njalo futhi yadlula.Ukuqinisekiswa kwe-Rheinland ISO 9001. Sinezikhungo zokugaya ze-SACCKE zaseJalimane ezine-axis ezinhlanu eziphezulu, isikhungo sokuhlola amathuluzi e-ZOLLER yaseJalimane esine-axis eziyisithupha, umshini we-Taiwan PALMARY kanye neminye imishini yokukhiqiza ethuthukisiwe yamazwe ngamazwe, sizibophezele ekukhiqizeniokusezingeni eliphezulu, lochwepheshe futhi eliphumelelayoIthuluzi le-CNC. Ubuchwepheshe bethu ukuklanywa nokukhiqizwa kwazo zonke izinhlobo zamathuluzi okusika i-carbide eqinile:Izigayo zokugcina, imishini yokubhoboza, imishini yokulungisa kabusha, ompompi namathuluzi akhethekile.Ifilosofi yethu yebhizinisi ukunikeza amakhasimende ethu izixazululo eziphelele ezithuthukisa ukusebenza kwemishini, zandise umkhiqizo, futhi zinciphise izindleko.Isevisi + Ikhwalithi + UkusebenzaIthimba lethu lokubonisana liphinde linikezeulwazi lokukhiqiza, ngezixazululo eziningi ezibonakalayo nezedijithali ukusiza amakhasimende ethu ukuthi angene ngokuphephile esikhathini esizayo semboni 4.0. Ukuze uthole ulwazi olujulile nganoma iyiphi indawo ethile yenkampani yethu, sicelahlola isayithi lethu orsebenzisa isigaba sokuxhumana nathiukuxhumana nethimba lethu ngqo.
    ifektri
    ama-bunning e-rotary burr

    Imibuzo Evame Ukubuzwa

    Q1: Iyini isizinda kanye nolwazi oluyinhloko lwenkampani yakho?

    A1: I-MSK (Tianjin) Cutting Technology Co., Ltd yasungulwa ngo-2015. Singumkhiqizi oqinisekiswe yi-ISO 9001 (oqinisekiswe yiRheinland), ochwepheshe bamathuluzi okusika e-CNC asebenza kahle kakhulu. Ukukhiqiza kwethu kuncike ezinhlelweni zokugaya ze-SACKE zaseJalimane ezine-axis ezinhlanu, isikhungo sokuhlola se-ZOLLER esine-axis eziyisithupha, kanye nemishini yokugaya yaseTaiwan ye-PALMARY, okusenza sikwazi ukuletha izixazululo zamathuluzi eziklanywe ngokunemba.

    Umbuzo 2: Ingabe uyifektri noma inkampani yokuhweba?

    A2: Singumkhiqizi oqondile wamathuluzi okusika i-carbide, hhayi umlamuleli wokuhweba.

    Umbuzo 3: Ungakwazi yini ukuthumela izimpahla endaweni yethu yokuthutha izimpahla eShayina?

    A3: Impela. Uma unomthumeli oqokiwe eShayina, sizohlela ukulethwa kuye ngokushesha.

    Q4: Yiziphi izimo zakho zokukhokha ezijwayelekile?

    A4: Indlela yethu yokukhokha eyinhloko eyamukelekayo ukudluliselwa kwemali ebhange (T/T).

    Q5: Ingabe ninikeza izinsizakalo zokusebenzisa amathuluzi ezenziwe ngezifiso noma ze-OEM?

    A5: Yebo. Sisekela ngokugcwele ama-oda e-OEM kanye nokwenza ngokwezifiso umkhiqizo. Ngaphezu kwalokho, sihlinzeka ngezinsizakalo zokuklama amalebula kanye nokuphrinta njengengxenye yokunikezwa kwethu kwe-OEM.

    Umbuzo 6: Yini eyenza inkampani yakho ibe ngumlingani othembekile?

    A6:

    Intengo eqhutshwa yinani - Uthola amathuluzi ekhwalithi ephezulu ngentengo efanele nefanelekile.

    Ushintsho olusheshayo – Ithimba lethu liphendula zingakapheli amahora angu-48 ngezingcaphuno kanye nezincazelo zobuchwepheshe.

    Ikhwalithi eqinisekisiwe – Sisekela yonke imikhiqizo ngokuzibophezela kokuqinisekisa ikhwalithi okungu-100%.

    Usekelo oluqhubekayo – Sinikeza isevisi yangemva kokuthengisa kanye nesiqondiso sobuchwepheshe esidingekayo esifanela izidingo zakho ezithile.

  • Okwedlule:
  • Olandelayo:

    • Thumela umlayezo wakho kithi:

    Bhala umlayezo wakho lapha bese uwuthumela kithi

    imikhiqizo ehlobene

    Thumela umlayezo wakho kithi:

    Bhala umlayezo wakho lapha bese uwuthumela kithi
    Cindezela u-enter ukuze useshe noma u-ESC ukuze uvale