Industrial Iduro Table iho ibujoko Top lu Press
ọja Alaye
| ọja Alaye | |||
| Brand | MSK | Fọọmu Iṣakoso | Oríkĕ |
| Agbara Motor akọkọ | 0.37 (kw) | Awọn ile-iṣẹ ti o wulo | Gbogbo agbaye |
| Nọmba Of Axes | Apa kan ṣoṣo | Fọọmu Ifilelẹ | Inaro |
| Liluho Diamita Range | 16 (mm) | Dopin Of Ohun elo | Gbogbo agbaye |
| Spindle Speed Range | 280-3100 (rpm) | Ohun elo Nkan | Irin |
| Spindle Iho Taper | MT2 | Lẹhin-Tita Service | Atilẹyin ọja fun Ọdun kan |
ẸYA
1. Iwọn iyipada iyara jakejado lati pade awọn iwulo oriṣiriṣi ati gbigbe igbẹkẹle.
2. Gbogbo-ejò giga-fifipamọ agbara agbara-agbara, eruku-ẹri ati bugbamu-ẹri, ati igbesi aye to gun.
3. Orisun yiyi jẹ ti irin ti o ga julọ, pẹlu rirọ ti o lagbara ati agbara.
4. Super-agbara lu Chuck ti wa ni ṣe ti ga-didara irin.Agbara clamping ti o lagbara, rigidity ti o dara ati konge giga.
5. Awọn worktable le ti wa ni n yi, eyi ti o le wa ni yi daadaa tabi odi.Igun nla, lagbara ati ki o gbẹkẹle.
6. Konge ga-didara spindle apoti, ga-didara simẹnti irin.Ga konge, ti o tọ, ọkan-akoko processing nigba processing.
Awoṣe ọja ati awọn paramita
| Nọmba nkan: | Z4116B | Z516-1A | Z520 | Z525 |
| Iwọn liluho ti o pọju mm: | 16 | 20 | 25 | |
| O pọju ọpọlọ ti spindle mm: | 80 | 90 | ||
| jara iyara Spindle: | 4 | |||
| Iwọn yiyi spindle r/min: | 280-3100 | |||
| Spindle taper: | MT2 | MT3 | ||
| Ijinna lati aarin spindle si busbar ọwọn mm: | 185 | 193 | ||
| Ijinna to pọ julọ lati opin spindle si tabili ni mm: | 255 | 270 | ||
| Ijinna ti o pọ julọ lati opin spindle si tabili ipilẹ, mm: | 120 | 480 | ||
| Iwọn tabili mm: | 235*235 | 250*250 | ||
| Iwọn ipilẹ mm: | 250*210 | 280*230 | ||
| Iwọn giga mm: | 860 | 930 | ||
| Awọn iwọn cm: | 60*38*73 | 65*35*80 | ||
| Iwọn iṣakojọpọ cm: | Ko ṣe akopọ | 75*54*30 | ||
| Iwọn apapọ/iwuwo apapọ kg: | 42 | 56 | ||
Fi ifiranṣẹ rẹ ranṣẹ si wa:
Kọ ifiranṣẹ rẹ nibi ki o si fi si wa
