Wholesale Professional Steel T-slot Le Chamfer Groove Milling Cutter
Bakeng sa ts'ebetso e phahameng ea Chamfer Groove Milling Cutter e nang le litefiso tse phahameng tsa phepelo le botebo ba sehiloeng.E boetse e loketse machining a groove tlase lits'ebetsong tse chitja tsa ho sila.Li-indexable tse kentsoeng ka mokhoa oa Tangentially li kenya warrant optimum chip ho tloswa tse tsamaisanang le tshebetso e phahameng ka dinako tsohle.
Theknoloji:
Mokhoa oa ho sila seipone ka thipa
Sebelisa thepa e ntle
E potlakile ebile e tšoarella
| Brand | MSK | Lintho tse bonahalang | Die steel, cast iron, carbon steel, alloy steel, tool steel, general iron |
| Mofuta | Qetella Mill | Flute Diameter D(mm) |
|
| Setifikeiti |
| Sephutheloana | Lebokose |
LIKOPO
Bakeng sa ho sila li-T-slots litafoleng le libetheng tsa lisebelisoa tsa mochini le lits'ebetso tse ts'oanang.
Sekoti se emeng se tlameha ho khaoloa pele, e le hore molala le shank li ka kena sehiloeng.
Molemo:
1.Litšepe tsa tšepe tsa tungsten tse kentsoeng li khethiloe, tse nang le boima bo phahameng le ho hanyetsa ho roala, li bohale ebile ha li bonolo ho lithipa tse khutšoanyane, le bophelo bo bolelele ba tšebeletso.
2.Moqapi oa bohale ba thipa, boqapi bo pota-potiloeng, khetho e babatsehang ea thepa, le moralo o moholo oa ho itšeha o ntlafatsa haholo boreleli.
3.Lehare le bohale.Sekhahla se bohale, se etsa hore seha se be boreleli, 'me moralo o khahlanong le ho sisinyeha oa ho itšeha o ka ntlafatsa ka katleho botsitso ba ts'ebetso le boleng ba holim'a metsi.
Moqapi oa 4.Chamfer, boholo bo tloaelehileng ba chamfer, 45 degree chamfer, pota-pota le contour e boreleli, ho etsa hore ho be bonolo ho kenya.
| Flute Diameter(mm) | Botenya (mm) | Bophara ba Hlooho(mm) | Bolelele ba Hlooho(mm) | Bolelele(mm) | Flute |
| 3 | 1/1.5/2/2.5/3 | 1.5 | 6 | 50 | 4 |
| 4 | 1/1.5/2/2.5/3 | 2 | 6 | 50 | 4 |
| 5 | 1/1.5/2/2.5/3 | 2.5 | 10 | 50 | 4 |
| 6 | 1/1.5/2/2.5/3 | 3 | 10 | 50 | 4 |
| 7 | 1/1.5/2/2.5/3 | 3.5 | 12 | 60 | 4 |
| 8 | 1/1.5/2/2.5/3 | 4 | 12 | 60 | 4 |
| 9 | 1/1.5/2/2.5/3 | 4.5 | 15 | 60 | 4 |
| 0 | 1/1.5/2/2.5/3 | 5 | 15 | 60 | 6 |
| 11 | 1/1.5/2/2.5/3 | 5.5 | 15 | 60 | 6 |
| 2 | 1/1.5/2/2.5/3 | 6 | 15 | 60 | 6 |
| 4 | 1/1.5/2/2.5/3 | 7 | 20 | 65 | 6 |
| 6 | 1/1.5/2/2.5/3 | 8 | 20 | 65 | 6 |
| 20 | 1/1.5/2/2.5/3 | 10 | 25 | 75 | 6 |
Sebelisa:
E sebelisoa haholo libakeng tse ngata
Ho Etsa Lifofane
Tlhahiso ea Mochini
Moetsi oa likoloi
Ho etsa hlobo
Motlakase Manufacturing
Ts'ebetso ea lathe
