Carbide T-type milling cutter Straight shank T-mofuta oa ho sila sehang

Carbide T-mofuta oa ho sila sehahi se otlolohileng shank T-mofuta oa ho sila sehang Featured Image

Bakeng sa ts'ebetso e phahameng ea T-slot milling ka litefiso tse phahameng tsa phepelo le botebo ba sehiloeng.E boetse e loketse machining a groove tlase lits'ebetsong tse chitja tsa ho sila.Li-indexable tse kentsoeng ka mokhoa oa Tangentially li kenya warrant optimum chip ho tloswa tse tsamaisanang le tshebetso e phahameng ka dinako tsohle.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

T-SLOT END MILL (2)

Theknoloji:
Mokhoa oa ho sila seipone ka thipa
Sebelisa thepa e ntle
E potlakile ebile e tšoarella
Lisebelisoa
Bakeng sa ho sila li-T-slots litafoleng le libetheng tsa lisebelisoa tsa mochini le lits'ebetso tse ts'oanang.
Sekoti se emeng se tlameha ho khaoloa pele, e le hore molala le shank li ka kena sehiloeng.

T-SLOT END MILL (2)

Lintho tse bonahalang	Die steel, cast iron, carbon steel, alloy steel, tool steel, general iron
Brand	MSK
Flute Diameter D(mm)	3-20
Mofuta	Qetella Mill
Shank Diameterd (mm)	1.5-10
Bolelele ba Hlooho (ℓ)(mm)	6-25
Setifikeiti	ISO9001
Sephutheloana	Lebokose

Molemo:
1.Litšepe tsa tšepe tsa tungsten tse kentsoeng li khethiloe, tse nang le boima bo phahameng le ho hanyetsa ho roala, li bohale ebile ha li bonolo ho lithipa tse khutšoanyane, le bophelo bo bolelele ba tšebeletso.
2.Moqapi oa bohale ba thipa, boqapi bo pota-potiloeng, khetho e babatsehang ea thepa, le moralo o moholo oa ho itšeha o ntlafatsa haholo boreleli.
3.Lehare le bohale.Sekhahla se bohale, se etsa hore seha se be boreleli, 'me moralo o khahlanong le ho sisinyeha oa ho itšeha o ka ntlafatsa ka katleho botsitso ba ts'ebetso le boleng ba holim'a metsi.
Moqapi oa 4.Chamfer, boholo bo tloaelehileng ba chamfer, 45 degree chamfer, pota-pota le contour e boreleli, ho etsa hore ho be bonolo ho kenya.

Flute Diameter(mm)	Botenya (mm)	Bophara ba Hlooho(mm)	Bolelele ba Hlooho(mm)	Bolelele(mm)	Flute
3	1/1.5/2/2.5/3	1.5	6	50	4
4	1/1.5/2/2.5/3	2	6	50	4
5	1/1.5/2/2.5/3	2.5	10	50	4
6	1/1.5/2/2.5/3	3	10	50	4
7	1/1.5/2/2.5/3	3.5	12	60	4
8	1/1.5/2/2.5/3	4	12	60	4
9	1/1.5/2/2.5/3	4.5	15	60	4
0	1/1.5/2/2.5/3	5	15	60	6
11	1/1.5/2/2.5/3	5.5	15	60	6
2	1/1.5/2/2.5/3	6	15	60	6
4	1/1.5/2/2.5/3	7	20	65	6
6	1/1.5/2/2.5/3	8	20	65	6
20	1/1.5/2/2.5/3	10	25	75	6