CNC Milling Rogista Mashiinka caajiska ah ee Iibka
MUUQAAL
1. Sariirta oo shubaya.Farsamada qurxoon waxay abuurtaa tayo aad u wanaagsan.Jidhka qalabku wuxuu qaataa naqshad laba-laab ah oo aan boodh lahayn, kaas oo aad waxtar u leh si looga hortago in walxaha shisheeye soo galaan.
2. Gantarada guurguura, qodista, shiididda, garaacista iyo caajiska, qalabka guud.
3. Madaxa korantada qodista xawaaraha sare leh, isku duuban wan tareen oo afar-line ah.
4. Afar-daan-daanka is-xakamaynta, saxnaanta sare, waxtarka sare leh, iyo si sahlan loo ilaaliyo xawaaraha sare ee CNC qodista iyo qalabka wax lagu shiidayo.
5. Goynta tooska ah, qaboojinta wareega, mashiinka goynta silsiladda iyo birta labada dhinacba, nidaamka sifaynta biyaha dhexe.
6. Qalabka hore ee tareenka ee hagaha, qalabka caqliga leh ee xawaaraha sare wuxuu hagaajiyaa tayada shaqada guud ahaan wuxuuna wanaajiyaa hufnaanta shaqada.
Hababka Farsamo ee Qalabka
| Hababka Farsamo ee Qalabka | ||||
| Magaca Halbeegga | Mashruuca | Qiimaha cabbirka | Qiimaha Parameter | Qiimaha Parameter |
| Qodista Workpiece masaafada ugu badan ee xarunta | Dhererka × ballac | 3000×3000mm | 4000×4000mm | 5000×5000mm |
| Kursiga shaqada | Ballaca T-slot | 28mm | 28mm | 28mm |
| Madaxa qodista wan toosan | Tirada | 1 | 1 | 1 |
| daloolka Spindle taper | BT50 | BT50 | BT50 | |
| Dhererka ugu badan ee qodista (Birta Kaarboonka ee Caadiga ah) | Φ90mm | Φ90mm | Φ90mm | |
| Qoto Dheeraanta / Dhexroorka Qodista | ≤5 | ≤5 | ≤5 | |
| Xawaaraha lafdhabarta | 30-3000r/daqiiqo | 30-3000r/daqiiqo | 30-3000r/daqiiqo | |
| Dhexroor tuubada ugu badan | M36 | M36 | ||
| Awoodda matoorka servo ee ugu weyn iyo kuwa madaxbanaan | 22kw/30kw/37kw (ikhtiyaar) | 22kw/30kw/37kw (ikhtiyaar) | 22kw/30kw/37kw (ikhtiyaar) | |
| Fogaanta cidhifka hoose ee dunta dunta ilaa miiska shaqada | 300-900mm (standard) | 300-900mm (standard) | 300-900mm (standard) | |
| Masaafada u jirta dusha hoose ee dunta dunta ilaa miiska shaqada | Waxa kale oo loo dejin karaa si waafaqsan aasaaska | Waxa kale oo loo dejin karaa si waafaqsan aasaaska | Waxa kale oo loo dejin karaa si waafaqsan aasaaska | |
| Dhaqdhaqaaqa dheer ee gantry | Istaroogga ugu badan | 3000mm | Hal madax 4000mm | Hal madax 5000mm |
| Xawaaraha dhaqdhaqaaqa dhidibka Y | 0-8m/daqiiqo | 0-8m/daqiiqo | 0-8m/daqiiqo | |
| Dhaqdhaqaaqa dambe ee madaxa awoodda | Istaroogga ugu badan | 3000mm | Hal madax 4000mm | Hal madax 5000mm |
| Xawaaraha dhaqdhaqaaqa dhidibka-X | 0-8m/daqiiqo | 0-8m/daqiiqo | 0-8m/daqiiqo | |
| Dhaqdhaqaaq quudinta wan toosan | Z-dhidibka safarka | 600mm | 600mm | 600mm |
| Heerka quudinta dhidibka Z | 0-5m/daqiiqo | 0-5m/daqiiqo | 0-5m/daqiiqo | |
| Meelaynta saxnaanta | X, Y dhidibka | ≤0.05mm | ≤0.05mm | ≤0.05mm |
| Ku celcelinta | X, Y dhidibka | ≤0.03mm | ≤0.03mm | ≤0.03mm |
Macluumaadka Alaabta
| Macluumaadka Alaabta | |
| Nooca | Mashiinka Qodista Gantry |
| Summada | Boseman |
| Awoodda Matoorka ugu weyn | 22 (kw) |
| Cabirka | 8000×8000×3800(mm) |
| Qodista Dhererka Dhexroorka | Φ2-Φ90 (mm) |
| Xawaaraha Spindle-ka | 30 ~ 3000 (rpm) |
| Spindle Hole Taper | BT50 |
| Foomka xakamaynta | CNC |
| Warshadaha lagu dabaqi karo | Universal |
| Baaxadda Codsiga | Universal |
| Shayga Shayga | Birta |
| Nooca Alaabta | Cusub |
| Adeegga Iibka Kadib | Hal sano oo dammaanad ah, Dayactirka Nolosha |
