Umatshini we-oyile kunye negesi ojikelezileyo othe nkqo
IMBONAKALO
1. I-spindle ilawulwa yi-handle + handwheel, elula kwaye ikhawuleza ukuyisebenzisa. Inxalenye ye-drill bit kulula ukuyitshintsha.
2. Ingalo ye-rocker inezinto ezilungileyo zokuthintela ukuguga kunye nezinto ezijiyileyo, nto leyo ehambelana neemfuno zokucubungula ixesha elide.
3. Seta iswitshi yamanzi okupholisa kunye neswitshi eyintloko ezimeleyo ngombane, kulula ukuyisebenzisa, kulula kwaye kukhuselekile ukuyiqhagamshela kumbane.
Ukusetyenziswa okuninzi
Ifanelekile kwimveliso nasekucutshungulweni kwezinto ezinkulu, eziphakathi nezincinci zokusebenza koomatshini, intsimbi, amandla, iimoto, inqwelo-moya, izixhobo, iinqanawa kunye neminye imimandla.
Ulwazi lweMveliso
| Uhlobo | I-Radial Drill Press | I-Spindle Hole Taper | UMorse 4 |
| Uphawu | I-MSK | Ifomu yoLawulo | Eyokwenziwa |
| Amandla eMoto aPhambili | 2.2 (kw) | Amashishini afanelekileyo | I-Universal |
| Ubukhulu | 1920×810×2300(mm) | Ifomu yoYilo | Ithe nkqo |
| Inani lee-Axes | I-Axis enye | Ububanzi besicelo | I-Universal |
| Uluhlu lobubanzi bokubhola | 40 (mm) | Izinto Eziphathekayo | Isinyithi |
| Uluhlu lwesantya seSpindle | 34-1220 (rpm) | Inkonzo Yasemva Kokuthengisa | Iwaranti Yonyaka Omnye |
Ipharamitha
| Ipharamitha | I-ZQ3040×13 | ||
| Ububanzi obukhulu beHole mm | 40 | Uluhlu lweSpindle Feed rpm | D.10-0.25 |
| Umgama ukusuka kwisiphelo se-Spindle ukuya kwitafile nge-mm | 260-1000 | Inqanaba lokutya le-Spindle | 3 |
| Umgama Ukusuka Kwisikhungo Se-Spindle Ukuya Kwikholamu yeBusbar mm | 360-1300 | Ingalo yeRocker I-Angle yokujikeleza° | ±180 |
| I-Spindle Stroke mm | 200 | Amandla eMoto yeSpindle | 2.2 |
| Umngxuma weTaper weSpindle (Mohs) | 4 | Amandla eMoto yokuphakamisa | 1.5 |
| Uluhlu lwesantya seSpindle rpm | 34-1220 | Ubunzima bomatshini kg | 1600 |
| Uthotho lweSisantya seSpindle | 12 | Ubukhulu mm 1920x810X2300 | 1920×810×2300 |
Thumela umyalezo wakho kuthi:
Bhala umyalezo wakho apha uze uwuthumele kuthi
