Umatshini wokuDla aMandla aPhakamileyo kunye nokuChaneka koShishino
UMBONO
Uphawu:
1. Kukho iintlobo ezimbini zezixhobo zomatshini we-CNC ezihlakaniphile: i-semi-enclosed kwaye ifakwe ngokupheleleyo.
2. Ukusebenza okuphezulu kunye nokugcinwa kwamandla, ukusebenza kakuhle kwemveliso kunye nokugcinwa kweendleko.
3. Imisebenzi eyahlukeneyo kunye noluhlu olubanzi lwesicelo.
4. Isixhobo somatshini esithe nkqo se-CNC sinamandla amakhulu kunye namandla anamandla.
| Uhlobo | Umatshini wokuSila kunye noKwemba | Uyilo lwefomu | Ngokuthe nkqo |
| Uphawu | MSK | Umda weSicelo | Universal |
| Amandla eMoto angundoqo | 4 (kw) | Umxholo Wento | Isinyithi |
| Imilinganiselo | 2300-1910-1990 (mm) | Uhlobo lweMveliso | Entsha kraca |
| Inani leezembe | I-Axis emithathu | Emva koThengiso lweNkonzo | Iwaranti yoNyaka omnye, uLondolozo loBomi bonke, iNkonzo yobuGcisa yeeyure ezingama-24 |
| Spindle Speed Range | 6000 (rpm) | Cross-Border Parcel Weight | 2800kg |
| Ifomu yokulawula | CNC | Ubunzima beyunithi | 2500kg |
| Amashishini asebenzayo | Universal | Umthamo weMveliso | 200cm * 220cm * 210cm |
Inkcazo
| Uhambo olusebenzayo | 550 Imodeli 500 * 500 * 500 650 Imodeli 600 * 500-500 750 Imodeli 700 * 500 * 500 | |
| Ubungakanani beDesika yokuSebenza | 550 Umzekelo 500-500 650 Umzekelo 600 * 500 750 Umzekelo 700 * 500 | |
| Umgama ukusuka Spindle End Face To Table | 100-600 | |
| Workbench Maximum Load | 800KG | |
| Ixabiso lokutya okuKhawulezayo kweOyile | 12M/MIN | |
| Ukubeka Ukuchaneka | ±0.015MM | |
| Ukuphindaphinda | ±0.015MM | |
| Spindle Maximum Speed | 6000 rpm | |
| Isixhobo seMagazini | Imodeli iyonke ifika emgangathweni kunye neMagazine yeSixhobo esineZikhululo eziHlanu ngokuKhethayo, kwaye imagazini ye-Desu Brand Bucket-Type Tool inezikhululo ezili-10. | |
| Ubunzima obupheleleyo | I-Fuselage yintsimbi yokuphosa yonke, umatshini uphela yi-3500KG | |
| Ubungakanani bomzimba | 2300-1910-1990 | |
| Izincedisi | Uphawu | Inkcazo |
| Isikhokelo | Isilivere | HGR35 |
| IKhokelo Screw | T81 | SFU3210 |
| IMoto ephambili yeGlaze | INVT | Umgangatho we-4KW unokuphuculwa nge-5.5KW 7.5KW |
| I-spindle | Wantong | Umgangatho we-8T30 unokuphuculwa ukuya kwi-8T40 |
| 2-Axis Motor | Sine | 110 I-Servo Brake |
| XY Axis Motor | Sine | 90 Servo |
| I-Knife Cylinder | Hayi Cheng | 4500KG |
Thumela umyalezo wakho kuthi:
Bhala umyalezo wakho apha kwaye uwuthumele kuthi
