Lithupelong moo mefuta-futa ea thepa e fihlelang litlhoko tse nepahetseng, Titanium-PlatedHSS Straight Shank Twist DrillSete (99 Pc) e hlahella e le tharollo ea mantlha bakeng sa litsebi le batho ba etsang lintho ka botebo. E entsoe ho laola lehong, tšepe, polasetiki le metsoako, sete ena e felletseng e kopanya tšepe ea boemo ba sefofane le theknoloji ea bokaholimo e fetolang papali—e fetola ho cheka ho tloaelehileng hore e be katleho e ikhethang.
Sehlomo sa Titanium: Saense e ka Mora Tekanyetso ea Khauta
Karolo e 'ngoe le e 'ngoe ea drill e feta ka har'a sekoahelo sa physical vapor deposition (PVD), e kopanyang lera la titanium nitride (TiN) la 3-micron ho li-cores tsa tšepe tse lebelo le phahameng tsa M2. Tšireletso ena ea khauta e fana ka:
Sebolai sa Khohlano: 52% e fokotsehile ka coefficient khahlano le likotoana tse sa koaheloang
Thermal Forcefield: E boloka mocheso oa 750°C ntle le ho e futhumatsa—e bohlokoa bakeng sa tšepe e sa hloekang le tšepe e lahliloeng
Ho Sireletsa ho Sireletsa ho Ts'enyeho: E hanela ho senyeha ha sepholi le ho oxidation ea sepakapaka
Jeometri e Nepahetseng: Ho Ntša Li-Chip ka Boenjiniere
Moralo oa sete ea flute e nang le li-spiral tse peli (sekhutlo sa helix sa 30°) o fihlella tekano e phethahetseng ea laboratori:
Lehong le Plastiki: Profaele e matla ea flute e ntša li-chips ka lebelo la 4m/sec, e thibela ho lla ha mamina
Tšepe: Li-groove tse bentšitsoeng li fokotsa ho khomarela ha aluminium ka 70%
Ntlha e Arohantsoeng ea 135° Keletso: Ketso ea ho itšehla thajana e felisa masoba a pele; li-bore li qala ka potlako ka metsotsoana e 0.3
Ho tloha ho di-micro-drill tsa 0.8mm ho isa ho di-heavy-hitter tsa 13mm, karolo e nngwe le e nngwe e boloka mamello ya ho matha ha ±0.03mm—e tsamaellanang le ho nepahala ha CNC.
Molemo oa Likarolo tse 99: Ho Feto-fetoha ha Maano
Ena ha se sete feela—ke tikoloho e hlolang lintho tse bonahalang:
Lisebelisoa tsa Tšepe tsa Bophara ba Diameter
| Bophara ba bophara | Lisebelisoa tsa Tšepe | Litšebeletso tse Ikhethang tsa Lehong/Plastiki |
|---|---|---|
| 0.8–3mm (likarolo tse 57) | Masoba a PCB, likere tsa oache | Ho etsa mehlala, li-resin tsa mabenyane |
| 3.2–6mm (likarolo tse 36) | Liphanele tsa 'mele tse iketsang, tšepe ea lakane | Lisebelisoa tsa khabinete, li-acrylic |
| 6.5–8mm (likarolo tse 4) | Liboloko tsa enjene, li-bracket tsa tšepe | Li-core tsa mamati, UHMWPE |
| 10mm (likarolo tse 2) | Flange e tenang, tšepe e lahliloeng | Lisebelisoa tsa ho kopanya mapolanka, liphaephe tsa PVC |
Ho kenyelletsoa ha mefuta e 3 ea bolelele (stub, jobber, taper-point) ho sebetsana le ntho e 'ngoe le e 'ngoe ho tloha ho engraving ea bokaholimo ho isa ho 8xD deep-hole boring.
Litekanyetso tsa Tshebetso: Taolo e Tsamaiswang ke Lintlha
| Thepa | Lebelo (RPM) | Sekhahla sa Phepo | Masoba ka Bit |
|---|---|---|---|
| 6061 Aluminium | 2,500 | 0.2 mm/phetoho | 1,200+ |
| Tšepe e Bonolo ea A36 | 900 | 0.15 mm/phetoho | 450 |
| Lehong le thata la Oak | 3,000 | 0.4 mm/phetoho | 3,000+ |
| Nylon e Tlatsitsoeng ka Khalase | 1,800 | 0.1 mm/phetoho | 180 |
Li-workshop tsa likoloi li tlaleha linako tsa kopano tse potlakileng ka 22% ha li bapisoa le ho sebelisa likotoana tse sa koaheloang.
Bohlale ba Ergonomic: Ka Nģ'ane ho Moeli o Fetileng
Saese e Ngotsoeng ka Laser: ID ea bophara ba hang-hang tlas'a mabone a mafura a workshop
Nyeoe ea Polokelo ea Magnetic: Boto ea moriti e lekantsoeng ka IP54 e thibela ho bola/ho pitikoloha
Shank Micro-Knurling: Ho tšoara ho thibelang ho thella ka har'a li-drill chucks tse tsofetseng
Ho kgona ho tsamaiswa habonolo ho fihlella motlakase: Litsebi tsa HVAC li cheka liphaephe tse sa hloekang sebakeng seo ka lisebelisoa tse se nang lithapo, e leng se etsang hore ho se ke ha e-ba bonolo ho li sebelisa.
Mekhoa ea Pholisang: Ho Eketsa Nako e Telele
Leha sekoahelo sa TiN se nolofalletsa ho cheka ka lehong/polastiki ka omileng, li-op tsa tšepe li hloka leano la mocheso:
1. Tšepe/E sa beheng: Oli e kopantsoeng (karolelano ea 10:1) phallo ea 4L/min
2. Aluminium: Sepholi sa moholi se thehiloeng ho parafini ho thibela ho teneha
3. Tšepe e entsoeng ka tšepe: Ho tjheka ka metsi hoa lumelloa (maemo a hodimo a 0.3mm/rev feed)
Ho hlokomoloha sepholitsi tšepeng ho fokotsa nako ea lisebelisoa
Tšusumetso ea Moruo: Matsete a Bophelo Bohle
Litšenyehelo ka Lesoba: $0.001 ka tšepe e bobebe khahlanong le $0.009 bakeng sa likotoana tse lahloang
E Loketse ho Sila: E amohela ho nolofatsa ho fetang 6 ka li-grinder tsa benche
Poloko ea Nako ea ho Phomola: Liphetoho tse 45 tse fokolang tsa li-bit ka projeke ea masoba a 50
Qetello
Titanium ea li-pc tse 99Sete ea Li-Bit tsa HSS Drille feta lisebelisoa ho ba sethala sa tlhahiso ea maano. Ka ho kopanya lihlomo tsa limolek'hule tsa TiN le jiometri e entsoeng ka hloko, e fa basebetsi ba tšepe matla a ho sila tšepe e sa hloekang, baetsi ba mapolanka matla a ho betla mesebetsi e metle e se nang li-burr, le litsebi tsa theknoloji matla a ho hlola litokiso tsa masimo. Likaracheng moo likarolo tsa tšepe ea carbon li robehang 'me tekanyetso ea chelete e tsoa ho tse nkeloang sebaka, pokello ena ea libetsa ea khauta e phatlalatsa ntoa khahlanong le ho sekisetsa—ho nepahala ho le hong ho ile ha qojoa ka nako.
Nako ea poso: Phuptjane-21-2025
