4-Flute HRC65 Tungsten Milling cutter
Tilmaam:
1. Birta Tungsten oo laga keenay qaybo ganaax ah + qalabka wax soo saarka ee dibedda laga keeno.
Waxaan isticmaalnaa 100% tungsten carbide base, oo aan diidno isticmaalka alaabta dib-u-warshadaynta ama alaabta sinaysa.
2.We laga soo dhoofiyo mashiinnada SACKE ee Jarmalka si loo shiido ganaax si loo gaaro saxnaanta xasilloon iyo dhammaystirka sare.
3.Qaybsiga aan sinnayn iyo xagal helix aan sinnayn si looga fogaado dhawaaqa iyo in la kordhiyo dhamaystirka dusha sare ee qaybaha warshadaysan.
4.HRC65.
5.Swiss soo dejinta ALoCa daahan, dahaarka kulaylka iyo caabbinta heerkulka sare, shiidid-adkeysi sare.
~ 3500HV Adag ee dahaarka iyo heerkulka ka hortagga oksijiinta 950 darajo.
6.Step habka / Full shiidi biibiile spiral, ka saarida siman chip inta lagu guda jiro goynta-xawaaraha sare, raasamaal chip lahayn / raso chip lahayn, si weyn u hagaajinta waxtarka wax soo saarka iyo hagaajinta workpiece dhammayn.
| Qalab | Titanium alloy, bir aan lahayn |
| Biibiile | 4 |
| Nooca | Nooca madaxa siman |
| Dhexroorka biibiile (mm) | 1-12 |
| Dhexroorka Shank d(mm) | 4-12 |
| Dhererka hargabka(ℓ)(mm) | 3-30 |
| Summada | MSK |
| Xidhmada | Sanduuqa |
| Dhexroorka biibiile (mm) | Dhererka hargabka (mm) | Dhexroorka Shank(mm) | Dhererka (mm) |
| 1 | 3 | 4 | 50 |
| 1.5 | 4 | 4 | 50 |
| 2 | 6 | 4 | 50 |
| 2.5 | 7 | 4 | 50 |
| 3 | 8 | 4 | 50 |
| 4 | 11 | 4 | 50 |
| 5 | 13 | 6 | 50 |
| 6 | 15 | 6 | 50 |
| 8 | 20 | 8 | 60 |
| 10 | 25 | 10 | 75 |
| 12 | 30 | 12 | 75 |
Isticmaal
Wax-soo-saarka duulista
Soo saarista mishiinka
Soo saaraha baabuurta
Samaynta caaryada
Wax-soo-saarka Korontada
farsamaynta lathe
