Ọkachamara Steel T-slot na Chamfer Groove Milling Cutter
Maka ịrụ ọrụ dị elu Chamfer Groove Milling Cutter nwere ọnụego nri dị elu yana omimi nke ịkpụ.Ọzọkwa adabara groove ala machining na okirikiri egwe ọka ngwa.Ntinye indexable arụnyere nke ọma na-enye ikike iwepụ mgbawa kacha mma jikọtara ya na arụmọrụ dị elu oge niile.
Teknụzụ:
Usoro egweri mma-ọnụ mirror
Jiri ezigbo ihe mee ihe
Ngwa ngwa na inogide
| Ụdị | MSK | Ihe onwunwe | anwụ ígwè, nkedo ígwè, carbon ígwè, alloy ígwè, ngwá ọrụ ígwè, general ígwè |
| Ụdị | Ọgwụgwụ Mill | Dayameta ọjà D(mm) |
|
| Asambodo |
| ngwugwu | Igbe |
Ngwa
Maka igwe igwe T-oghere na tebụl na akwa nke ngwaọrụ igwe na ngwa ndị yiri ya.
A ghaghị ibu ụzọ gbutu oghere kwụ ọtọ, ka olu na shank wee banye na ịkpụ.
Uru:
1.Imported tungsten ígwè ogwe na-ahọrọ, na elu ike ike na-eyi na-eguzogide, nkọ na adịghị mfe obere mma, na ogologo ọrụ ndụ.
2.Knife onu imewe, okirikiri nka, magburu onwe ihe nhọrọ, na nnukwu igbutu imewe ukwuu mma na ire ụtọ.
3.Nkọ nkọ.Mkpụcha ahụ dị nkọ, na-eme ka ọkpụkpụ ahụ dị mma, na ihe mgbochi na-eme ka ọ bụrụ ihe na-eme ka ọ dị mma nwere ike imeziwanye nkwụsi ike nhazi na mma elu.
4.Chamfer design, ọkọlọtọ chamfer size, 45 degrees chamfer, gburugburu na-eji ire ụtọ contour, na-eme ka ọ dị mfe ịwụnye.
| Dayameta ọjà (mm) | Ọkpụrụkpụ (mm) | Dayameta isi (mm) | Ogologo isi (mm) | Ogologo(mm) | Ọjà |
| 3 | 1/1.5/2/2.5/3 | 1.5 | 6 | 50 | 4 |
| 4 | 1/1.5/2/2.5/3 | 2 | 6 | 50 | 4 |
| 5 | 1/1.5/2/2.5/3 | 2.5 | 10 | 50 | 4 |
| 6 | 1/1.5/2/2.5/3 | 3 | 10 | 50 | 4 |
| 7 | 1/1.5/2/2.5/3 | 3.5 | 12 | 60 | 4 |
| 8 | 1/1.5/2/2.5/3 | 4 | 12 | 60 | 4 |
| 9 | 1/1.5/2/2.5/3 | 4.5 | 15 | 60 | 4 |
| 0 | 1/1.5/2/2.5/3 | 5 | 15 | 60 | 6 |
| 11 | 1/1.5/2/2.5/3 | 5.5 | 15 | 60 | 6 |
| 2 | 1/1.5/2/2.5/3 | 6 | 15 | 60 | 6 |
| 4 | 1/1.5/2/2.5/3 | 7 | 20 | 65 | 6 |
| 6 | 1/1.5/2/2.5/3 | 8 | 20 | 65 | 6 |
| 20 | 1/1.5/2/2.5/3 | 10 | 25 | 75 | 6 |
Jiri:
A na-eji ya n'ọtụtụ ebe
Nrụpụta ụgbọ elu
Igwe mmepụta ihe
Onye na-emepụta ụgbọ ala
Ime ebu
Nrụpụta ọkụ eletrik
Nhazi lathe
