4-Ọkpọ HRC65 Tungsten Milling cutter 303 304 316 Ngwaọrụ CNC Pụrụ Iche nke igwe anaghị agba nchara Titanium alloy end mill
Atụmatụ:
1. Ihe ndị dị mfe e si na ígwè Tungsten nweta + ngwa mmepụta e si mba ọzọ bịa.
Anyị na-eji ihe ntọala tungsten carbide 100% eme ihe, anyị anaghịkwa eji ihe ndị e ji emegharị ihe ma ọ bụ ihe ndị e ji agwakọta ihe eme ihe.
2. Anyị si na Jamanị bubata igwe SACCKE maka igwe e ji akwọ ihe nke ọma iji nweta ezigbo nhazi na imecha ya nke ọma.
3. Nkewa na-enweghị nhata na akụkụ helix na-enweghị nhata iji zere resonance ma mee ka elu nke akụkụ ndị a haziri ahazi dịkwuo elu.
4.HRC65.
5. Mkpuchi ALoCa nke Switzerland wetara na Switzerland, mkpuchi okpomọkụ na iguzogide okpomọkụ dị elu, igwe egweri siri ike.
~ 3500HV Ike mkpuchi na okpomọkụ nke ogo 950 nke na-egbochi oxygen.
6. Usoro nzọụkwụ/ntụgharị zuru oke nke spiral opi, iwepụ chip dị nro n'oge ịcha ngwa ngwa, enweghị mkpokọta chip/enweghị nchịkọta chip, na-eme ka arụmọrụ mmepụta dịkwuo mma ma na-eme ka mmecha workpiece ka mma.
| ihe | Alloy titanium, ígwè anaghị agba nchara |
| Ụ̀tụ̀ | 4 |
| Ụdị | Ụdị isi dị larịị |
| Dayameta ọjà (mm) | 1-12 |
| Dayameta nke ogwe osisi d(mm) | 4-12 |
| Ogologo ọjà (ℓ)(mm) | 3-30 |
| Akara aha | MSK |
| Ngwugwu | Igbe |
| Dayameta ọjà (mm) | Ogologo ọjà (mm) | Dayameta nke ogwe osisi (mm) | Ogologo (mm) |
| 1 | 3 | 4 | 50 |
| 1.5 | 4 | 4 | 50 |
| 2 | 6 | 4 | 50 |
| 2.5 | 7 | 4 | 50 |
| 3 | 8 | 4 | 50 |
| 4 | 11 | 4 | 50 |
| 5 | 13 | 6 | 50 |
| 6 | 15 | 6 | 50 |
| 8 | 20 | 8 | 60 |
| 10 | 25 | 10 | 75 |
| 12 | 30 | 12 | 75 |
Jiri
Mmepụta ụgbọelu
Mmepụta Igwe
Onye nrụpụta ụgbọala
Ime ebu
Mmepụta Eletriki
Nhazi lathe
