HRC55 Carbide 2 Flute Muilnean Deireadh Fad Coitcheann
Stuth amh: Cleachd ZK30UF le susbaint 12% Co agus meud gràin 0.6um
Còmhdach: AlTiSiN, le cruas agus seasmhachd teirmeach suas ri 4000HV agus 1200 ℃, fa leth
Tolerance of End Mill Trastmeter: 1 ＜ D≤6 -0.010 ～ -0.030; 6 ＜ D ≤10 -0.015 ～ -0.040; 10 ＜ D≤20 -0.020 ～ -0.050
Còmhdach: AlTiSiN, tha susbaint àrd alùmanum a ’toirt seachad cruas teth sàr-mhath agus strì an aghaidh oxidation.
Flutes: 2 flute, math airson toirt air falbh chip furasta airson giollachd biadhaidh dìreach, air a chleachdadh gu farsaing ann an giullachd slot is tuill.
Tolerance of End Mill Trast-thomhas:
1＜D≤6 -0.010～-0.030
6＜D≤10 -0.015～-0.040
10＜D≤20 -0.020～-0.050
Paramadairean gearraidh:
Vc = 220 （100-800） m/min
ap = 1/2D (1/8-3/4D)
ae=1/2D(1/4-1d)
fz=0.15mm(0.02-0.2)
Tha an ceàrn shnìomhanach 35 ceum, aig a bheil sùbailteachd làidir don stuth agus ha
Sònrachadh:
| Nì NO. | Trast-thomhas D | Fad Gearraidh | Trast-thomhas Shank | Fad iomlan | Flùraichean |
| MSKEM4FD001 | 3 | 8 | 3 | 50 | 2 |
| MSKEM4FD002 | 1 | 3 | 4 | 50 | 2 |
| MSKEM4FD003 | 1.5 | 4 | 4 | 50 | 2 |
| MSKEM4FD004 | 2 | 6 | 4 | 50 | 2 |
| MSKEM4FD005 | 2.5 | 7 | 4 | 50 | 2 |
| MSKEM4FD006 | 3 | 8 | 4 | 50 | 2 |
| MSKEM4FD007 | 4 | 10 | 4 | 50 | 2 |
| MSKEM4FD008 | 5 | 13 | 5 | 50 | 2 |
| MSKEM4FD009 | 5 | 13 | 6 | 50 | 2 |
| MSKEM4FD010 | 6 | 15 | 6 | 50 | 2 |
| MSKEM4FD011 | 7 | 18 | 8 | 60 | 2 |
| MSKEM4FD012 | 8 | 20 | 8 | 60 | 2 |
| MSKEM4FD013 | 10 | 25 | 10 | 75 | 2 |
| MSKEM4FD014 | 12 | 30 | 12 | 75 | 2 |
| MSKEM4FD015 | 14 | 35 | 14 | 80 | 2 |
| MSKEM4FD016 | 14 | 45 | 14 | 100 | 2 |
| MSKEM4FD017 | 16 | 45 | 16 | 100 | 2 |
| MSKEM4FD018 | 18 | 45 | 18 | 100 | 2 |
| MSKEM4FD019 | 20 | 45 | 20 | 100 | 2 |
| Stuth workpiece | ||||||
| Stàilinn Charbon | Alloy Steel | Iarann Tilgeil | Alloy Aluminium | Alloy copair | Stàilinn nach meirg | Stàilinn air a chruadhachadh |
| Freagarrach | Freagarrach | Freagarrach | Freagarrach | Freagarrach | ||
